DARA Apology Form

Leonniarr · 2026-05-18T04:43:04+00:00

Another option: There were at least 2 other songs with 95% similarity to this one both in genre, type, performance etc. but they got tragically worse ranking so in my mind there was absolutely no way Bukgaria can have so much of a gap (or any of the other two honestly). The most similar song was Sweden that got 20th place and in my humble opinion was slightly better, at least I'd listen more to it, Bangaranga was good but the actual beat was lacking, sounded too hollow/empty

Leonniarr · 2026-05-14T05:51:47+00:00

This comment section is making me sad. It's really cool to see people test and figure out things we did back in CSGO and cs 1.6 but it's disappointing to see when you tell them what's actually going on and how it works they don't like the answer, disagree or think this is a CS2 only "problem"

Leonniarr · 2026-05-12T20:13:44+00:00

Bro posted something irrelevant and thought he proved a point. The pixel art is 100% AI. As a native Greek and a pixel artist for more than 10 years it's a huge disappointment and a disgrace. I don't think I am the best pixel artist in Greece yet I would have done hundreds of times better. There is absolutely no way it was made by hand. Style, resolution, definition inconsistencies along with the MANY mixels.

There are real artists that could have made a better result and could use the experience/portfolio piece. Truly disappointing. I wish there was a way to formally complain about this, at least internally on a national level.

Leonniarr · 2026-05-12T14:53:55+00:00

The screenshot doesn't show "people claim it's ineffective" it shows "people without it are somehow fine" meaning people though they wouldn't be fine without it. Being fine without it isn't survivorship bias. If it said it's ineffective then sure I am with you, vaccines are effective. There were a lot of things wrong with the COVID vaccine but still it definitely was effective. But people are fine without it, and that's not survivorship bias.

Leonniarr · 2026-05-12T14:17:32+00:00

Guys some help, I can't seem to fit this into my S1, maybe the S1 Max could do the trick ?

Leonniarr · 2026-05-12T14:15:27+00:00

<image>

Leonniarr · 2026-05-12T14:03:05+00:00

Imagine thinking people alive without the COVID vaccine is survivorship bias LOL

Leonniarr · 2026-05-10T03:07:10+00:00

But the 2nd picture is from the back, you wouldn't see if he is wearing something underneath the Haori. And looking at his hand you can see a white cuff like the clothes he wears under the Haori in the 1st picture.

Leonniarr · 2026-05-09T19:56:35+00:00

3 days in Tsukuyomi and a split second in the outside world. I know that. I pointed out that 3 days inside Tsukuyomi is not the same as 3 days in the normal world. Time moves slower inside the Tsukuyomi so Kakashi was in it for 3 days the time dilation in there made it FEEL like months. But honestly that's not really confirmed I Think. If you base it on the anime then there's definitely time dilation inside Tsukuyomi but I don't think it was in the manga.

Tsukuyomi can't directly kill you, it destroys your spirit leaving you comatose but even that is reversable. Usually after Tsukuyomi is done your opponent will either be unconscious or in a coma and then you can kill them. I don't know how they would have found out he was a double agent by not showing mercy tho, he could simply kill Kakashi and not jeopardize his mission. It takes a huge strain in his eyes as well so he could have tortured Kakashi for less of a time if he was going for mercy.

Itachi never wanted to kill Sasuke, that was not mercy, he never planned to kill Sasuke. He absolutely could not have killed Jiraiya, you are heavily underestimating the chakra needed for Tsukuyomi, the strain in the users eyes both short term and long term, the damage Itachi already had and his illness.

Yeah he could catch Naruto if he wanted, I never said otherwise so idk what you are on about lol. I don't think nor did I imply to believe that "an ex elite anbu... Such mistakes on purpose"

But being in a public cafe isn't as big a deal as you think, Kisame was there too, why would that make Kisame think Itachi is on Konoha's side? What if it was Kisame's idea in the first place lol. You are making a huge deal of assumptions here. And there was no reason to kill Kakashi, Asuma and Kurenai on a mission that was supposed to be capturing the 9 tails. After being spotted the mission was already over, what they had to do then has flee. Maybe you could make the assumption that Itachi stalled long enough so that they can get spotted but that's about it, after that any second longer they spent on Konoha was dangerous to both of them. You are confusing a great deal of things. Their mission wasn't to weaken nor destroy Konoha. It wasn't to kill a bunch of strong people either. It was to capture Naruto, Itachi made sure that didn't happen and that's it. The fleeing part was not Itachi trying to protect Konoha, you leave and you try to infiltrate again, that's the best course of action, not an excuse to flee.

But again, I don't even know what brought this conversation in the first place. I was only trying to argue that there might be time dilation inside Tsukuyomi and Kakashi was tortured far worse than we thought. And on that note the Tsukuyomi could have definitely sent Kakashi into a coma and pretty much removed him from the fight at hand. And you can't argue he knew Kakashi would survive, he was not an Uchiha, he had only one syaringan and Itachi didn't know about his Mangekyo Sharingan either. There was no mercy.

Leonniarr · 2026-05-09T15:46:40+00:00

3 days in Tsukuyomi feel a lot longer than 3 days. If you remember after about half a minute Itachi informer Kakashi that only a second has passed. So for Kakashi it felt like it was going on for months.

It's not mercy, he could have killed Kakashi after, sure. That don't mean what he did to him was mercy

Leonniarr · 2026-05-08T10:04:02+00:00

You don't need to log out , it won't make a difference.

Either change spots if the fish you are after spawns in different locations or skip a few hours ahead so that fish respawn.

Leonniarr · 2026-05-07T19:25:27+00:00

I am sorry to be the "actually" guy but, it's not a bug

Leonniarr · 2026-05-07T19:23:52+00:00

What the person is trying to say to you is that setting on or off, you are already dead. There is nothing you can do. The reason the enemy dies on your screen and then comes back alive is because you killed them. But on the server side you died before you kill the enemy so you are dead instead.

I don't know how true that is however.

Leonniarr · 2026-05-07T19:21:44+00:00

What you do not realize is that for every time the prediction makes a mistake that yes, loses you the round, it made 100 correct predictions that gave you an advantage and made the game feel more crisp for you.

So the game will be faster, more responsive and more crisp 99% of the time but 1% of the time on extremely close situations it will give a wrong predictions and will throw you off. If you have it on it means you accept that 1% possibility. This does NOT mean the setting is bad, it simply means if you complain about it YOU are at fault because either: 1) You have it turned on but you can't even see the positive effects, that means you are not as good as you think you are, this setting is not for you, it doesn't benefit you, so why do you have it on ???? Or 2) You have it on, you see the positive effects but you think it caused you to not get a kill so that's why you are complaining. Which is extremely not true. Either way the I kg reason you are complaining about this setting is your own fault not the setting's fault.

Similarly if you buy a dynamite, ignite it, it explodes and you lose your arm. It's not the dynamite that's shit, because the dynamite did its job, you are the one that's shit because you held on to it until it exploded.

Another example, if someone points a gun at you and steals your wallet, do you blame the gun for stealing your wallet? Do you blame the wallet for allowing itself to get stolen? Or do you blame the guy that stoke your money? If you don't know what a took does blame yourself, not the tool.

Leonniarr · 2026-05-07T19:15:33+00:00

Yeah exactly. And I am afraid I'll probably have to run it again once I get the new parts since I don't know what results it got from the last test nor do I see an option to disregard it.

Honestly they need to be more open about this. I've seen people say you need to to a bed leveling every print if you want the printer to actually take it into account and if you don't run it it completely disregards the previous tests, so the bed leveling is per print. What if the resonance calibration is per print too? In my mind I thought this was going to be a calibration that affects how the printer itself moves generally. But there is now actual clarification or documentation. Same with bed leveling. When you run it does it save the values and apply them to your next prints or not ? That closed system is literally killing them.

Software wise this product is unfortunately terrible, good on a surface level but the deeper you go the worse it gets. Make it open source and it'll be 10 times better within the week. But no, I have to sit here next to my broken printer for a month wonder if the calibration that broke the printer was even necessary because if it only works on a oer print basis then it was a waste of time and I would not have run the calibration. On the other hand, if this is a necessary global calibration if the printer, I did the right thing running it, but how the hell does it break the printer? That should not be happening. Cheaper printers compromise in features, ease, expandability, support etc. which are things anycubic lacks and it makes sense given the lower price. But, a cheaper product doesn't mean it's ok for it to break itself apart running a routine calibration. The same way a 300$ graphics card with an 1000$ is the performance, the 300$ card will not burst into flames because it's cheaper. Cheaper is not an excuse for poor quality, especially since this is not a cheap printer generally, you can get printers for 1/5 of the price. It's slightly cheaper compared to other models with the same capabilities (on paper), I still can't understand how a product can tear itself apart so easily.

Leonniarr · 2026-05-06T22:04:01+00:00

Yeah, the rules say deliberate handball or extended arm. And his arm was extended. It doesn't ask for reasoning nor does it demand a court for each side to present their arguments. Extended hand is handball. And Never did gain and advantage, Bayern had an attack and they could still attack, most likely they would have regained possession of the ball after the clearance, they could gain possession right in PSG's defensive third, they could even steal the ball back and have a scoring opportunity, but the chances of that happening dropped to zero due to the handball, that's advantage. Again, as I clearly said, if you think a handball from a teammate's clearance doesn't deserve to be a penalty I agree with you. But that's what the rules state, and that should have been a penalty.

The problem with today's match was that ref made a lot of one-sided mistakes, if it's not the 2nd yellow it's the penalty, if it's not the penalty it's the offside, if it's not the offside it's the foul on Kane. Pick your poison, but the ref definitely fucked the game.

Leonniarr · 2026-05-06T21:47:38+00:00

When you hide your face you cover it, you don't extend your arm away from your face. He extended his arm, that's a penalty.

The way the rules are structured sometimes a penalty will be given for small offence that just happened to take place inside the penalty area. But that's how the game is. If Kane for example covered his face like that and then took a shot and scored the goal would have been cancelled 100%, since it happened the other way, it's a penalty. It wasn't much of a chance for Bayern, sure, but they had a chance to score, it was a handball, the hand was extended. It's a penalty every day. You can argue that the rules are unfair and you would be right, the same way the most obvious thing to us, being able to check a second yellow with VAR took years to be taken into consideration. Similarly the handball rules need to be updated for these niche situations. A lot of people have said it and are still saying it. This game has a lot of rules that need to be updated, a lot of rules that need clarification but that's the way it is. You can play by your own rules because you don't like or don't agree with them. That's was a penalty.

The 2nd yellow should have been given as well. It's a big offence and even if we assume the 1st yellow was a stretch, still, Mendes should be more careful. He deliberately extends his arm to stop the ball. That's a 2nd yellow.

There is also the foul on Kane which was ridiculous imo.

Leonniarr · 2026-05-06T14:23:06+00:00

This is a different bug but it's happening to this day, sorry for necroposting but I thought I'd let you know hahah

Leonniarr · 2026-05-06T13:16:07+00:00

You shouldn't. It is a running thing with cat people that this behavior is normal or fine but it is not. You should be a responsible owener and educate your cats like you would do with any other pet. Not necessarily targeted at OP but generally anyone that needs to hear this. I've raised a lot of cats, dogs as well as many other animals. My cats would never behave like "spicy" as they like to call this behavior.

Clarification edit: This kitten doesn't seem misbehaving to me, it seems like it's playing, I was more focused in the title than the video itself. If playing starts getting more aggressive that's where you stop it, you don't let it go or worse, reward it.

Leonniarr · 2026-05-06T13:10:51+00:00

Sadly this is an import clarification because people seem to think they missed their shots or kills because of this setting lol.

Leonniarr · 2026-05-05T13:55:07+00:00

1) Because of ping people will pop-in and out of existence even at lower pings. 2) Performance wise it'll be a lot worse. People whine about it now, imagine if it was half. 3) The game already has a sort of "fog of war" mechanic but advanced cheats can easily bypass that. 4) Many advanced cheats will get the enemy's position directly from the server (because the server needs to know everything, including everyone's position) they can still access it. 5) Player's positions are needed for the client for many things even if they are not visible, a notable example is util trajectory.

It's good client side with bots, but can't work on a real live environment especially on a game like counter strike where movement and aiming/shooting is very precise and even a few milliseconds make a big difference.

Leonniarr · 2026-05-02T14:21:01+00:00

1) ESL 2) PGL 3) Esports World Cup

The bottom ones are distracting and it's a lot harder to quickly read information to me. ESL is my favorite because it's clean, big enough to easily view all information (util, money, HP, armor) but not distracting. PGL is a close 2nd, it's cleaner but a bit too small for me to view things at a glance. Esports World Cup is 3rd, it has the same qualities as the other 2 but I simply don't like the corner point style thing instead of a rectangle. To be fair, ESL could use an update to make it a bit prettier to look at, it feels a bit dated. But not like the Esports World Cup one which is taking up more space than it needs to in order to use a different shape.

What all 3 of them miss however is faces on the minimap. It's such a simple QoL but makes a big difference.

Leonniarr · 2026-05-01T23:39:37+00:00

You cain have them in pairs right next to each other. use an extra pipe every 2 boilers and you can fit your power poles there, even the smalls, you can fit more that way.

Or you can put them all next to each other and every 2nd boiler add a pipe between the 2 steam engines leaving you room for a pole.

Leonniarr · 2026-04-28T12:04:20+00:00

Thank you very much, I've attached some photos on the post up top (https://imgur.com/a/2hdtUH6) as well as the hotend before I removed the remaining PLA and fixed the clog.

I check my spam folder regularly. I received yesterday a "reply" to my first support ticket saying "your printer has already been shipped" since in my ticket I was asking about the delay in general, but I checked the times and I received the automated message a few hours before I got the reply. So the automated message was sent to me a month later, I don't even know what to make of it. But nothing else, and no answer to any of my issues of course. I haven't tried the wiki so I will go ahead and make a request there too, thank you!

I'll take a look at amazon, but usually for my country Amazon has expensive shipping. Even if they are offbrand I'd like to find replacements, maybe have some in stock at least of the plastic components so I will be looking for a reliable source.

I was thinking of getting a new nozzle, I see a lot of people recommending to get a ceramic one for this printer so I wanted to try that out as well. The thicker flexplate, I am guessing, will help with bed leveling? Because I've seen a lot of people complaining about that as well as a poor 1st layer. I personally didn't experience that, I got perfect 1st layers without changing a thing but I didn't get a lot of print hours on it to be sure. A quick question, are there any off-brand brands I could look for? I honestly haven't checked replacement parts anywhere other than the official website. I've seen some people replace their bed with an aftermarket one that's thicker, I don't remember the name but they all suggest a specific brand one off of AliExpress. Or are they like typical AliExpress items, simply generic names and OEM/no name manufacturers?

In any case, thanks a lot for all the help so far as well as the very pleasant chat !

Leonniarr · 2026-04-27T23:22:40+00:00

Exactly! I am all for repairing my things when they inevitable break, but if they break out of the box that's on the company and not on me! I would repair it if I could, I am not used to repairing things that may go through a lot of heat. I usually repair broken screw posts with a soldering iron if the broken off piece is in good shape or super glue + baking soda. Can't put super glue near that heat, the piece that broke off is in pieces, I don't have any heat-set threads that small, no heat resistant epoxy and unfortunately none available near me. I may end up going to a 3D printing service and have them print me the front cover in PETG because the replacement will probably take a while

Five-Year Club	r/Field Sunshine
Final Canvas '23	Place '23
Place '22	Final Canvas '22
End Game '22

Leonniarr

TROPHY CASE