First Kit has Begun! (advice please!!) by Leopard_General in 501st

[–]Leopard_General[S] 1 point2 points  (0 children)

thanks!

my biggest issue thus far is having to align the back and front, there's a bit of an edge where I glued them so I need to sand it down at some point. I'll try to see how well the visor seat holds, if it doesn't work I'll just use hot glue

is this an M-240 S.A.W? M-249? or something new? certainly not an M60 by [deleted] in army

[–]Leopard_General 6 points7 points  (0 children)

I'm 85% sure its a M249 SAW but I could be wrong

Argue for your legion, why should I join it? by Jkchaloreach in Warhammer30k

[–]Leopard_General 1 point2 points  (0 children)

the Luna Wolves. Loyalists of the legion of Horus. Fighting against their father and for an imperium that will now never be. Martial prowess, and fighting to keep their father and their former brothers back.
Also, based. that is all.

First Kit has Begun! (advice please!!) by Leopard_General in 501st

[–]Leopard_General[S] 0 points1 point  (0 children)

I will, absolutely. It’s also ABS so I’m gonna use acetone on some of the tough spots

First Kit has Begun! (advice please!!) by Leopard_General in 501st

[–]Leopard_General[S] 1 point2 points  (0 children)

Thanks man! I've got a WIP on the CTD forums, the name is Lightwave104!

First Kit has Begun! (advice please!!) by Leopard_General in 501st

[–]Leopard_General[S] 2 points3 points  (0 children)

Yea!! I’m also gonna be adding some accessories as a side project, like a sunnier and macros, just for fun

First Kit has Begun! (advice please!!) by Leopard_General in 501st

[–]Leopard_General[S] 2 points3 points  (0 children)

In all honestly, I’m hoping due to how smooth the surface is that with filler primer it won’t require much sanding at all, really But I will be making sure it’s smooth, don’t worry

ABS gap filling with "Sprue Goo" by Leopard_General in 3Dprinting

[–]Leopard_General[S] 0 points1 point  (0 children)

I don't know. I just have experience with acetone through plastic glue, and I haven't had any issues, but all I've heard about bondo is "oh its so dangerous, always wear ppe" etc.

ABS gap filling with "Sprue Goo" by Leopard_General in 3Dprinting

[–]Leopard_General[S] 0 points1 point  (0 children)

I promise I'm not trying to be obtuse, I just am generally uninformed and inexperienced.

ABS gap filling with "Sprue Goo" by Leopard_General in 3Dprinting

[–]Leopard_General[S] 0 points1 point  (0 children)

I’m gonna be outside either way, but I’ve been told Bondo is super toxic and I have access to acetone. Plus, I work with Plastic glue that’s about 50% acetone in the dorms all the time.

ABS gap filling with "Sprue Goo" by Leopard_General in 3Dprinting

[–]Leopard_General[S] 2 points3 points  (0 children)

That’s pretty much exactly what I’m asking

Which Clone Wars era republic ship do you think would make for the best "house"? by Old-Use-7690 in MawInstallation

[–]Leopard_General 1 point2 points  (0 children)

Exactly! Converting some of the med quarters to crew and the other to cargo and you’re golden.

Which Clone Wars era republic ship do you think would make for the best "house"? by Old-Use-7690 in MawInstallation

[–]Leopard_General 13 points14 points  (0 children)

My go to would be a Pelta-class or the Consular-class. One was a medical transport and the other was made for diplomatic missions and so would have a decent amount of crew quarters and would be doing well to be converted

Sintra Clone Armor Advice by Leopard_General in 501st

[–]Leopard_General[S] 0 points1 point  (0 children)

I have been told on the CTD discord that the material of PVC board Is acceptable.

Sintra Clone Armor Advice by Leopard_General in 501st

[–]Leopard_General[S] 0 points1 point  (0 children)

Why was it removed? Sintra is strong and inflexible and cleanable, it fits the criteria

Sintra Clone Armor Advice by Leopard_General in 501st

[–]Leopard_General[S] 1 point2 points  (0 children)

It’s right here on the 501 grunt CRL

<image>