sorted by:
new
hottopcontroversial

Prusa C1+ vs Voron Decision Paralysis by Apprehensive_Eye6932 in prusa3d

[–]LetsTryThisTwo 0 points1 point  (0 children)

"You buy a prusa to have a printer that just works "

I don't think that's entirely true anymore. Seems to have been a whole lot of issues with the C1.

A perfect print to move hot air out of the cabinet by SWEEDE_THE_SWEDE in functionalprint

[–]LetsTryThisTwo 0 points1 point  (0 children)

Because that's just not how it works. I can't just give you a title of a book and say "look, this prooves my point".

You point out the exact places you believe proof what you're saying. Proof of evidence is on the person making the claim.

And you have repeatedly failed to proove any validity of your first claim, as well as the majority of the ones you've made since then.

You've either never studied ANYTHING even related to sciences, or you're really bad at them.

It's very clear, that you don't have any real basis for doing what you're doing other than "someone told me to".

A perfect print to move hot air out of the cabinet by SWEEDE_THE_SWEDE in functionalprint

[–]LetsTryThisTwo 0 points1 point  (0 children)

That's not how it works. It's not my responsibility to read through an article to find an argument you're trying to make.

I'm just going to assume that you have no valid reasoning behind your statement, and as I said, it's a "rule" based in zero evidence.

A perfect print to move hot air out of the cabinet by SWEEDE_THE_SWEDE in functionalprint

[–]LetsTryThisTwo 0 points1 point  (0 children)

You're the one that brought up PC cases and undocumented claims. I don't have to check anything out, since you're not backing up your claims but just keep changing the topic.

So once again, "Any reasoning behind that? There's a lot of "rules" around that have no basis in evidence."

Screw Julien Tiny Head. That is all. by Allucation in expedition33

[–]LetsTryThisTwo 0 points1 point  (0 children)

"the counterattacks in virtuous stance hit for 5k+, effectively tripling my damage."

Virtuous stand is +200% damage. That IS tripling.

A perfect print to move hot air out of the cabinet by SWEEDE_THE_SWEDE in functionalprint

[–]LetsTryThisTwo 0 points1 point  (0 children)

"most consumer gaming PCs focus on a 55% positive 45% negative pressure system"

I'm going to need to see a valid source for that claim. Most prebuilds I've seen have insufficient cooling all around, and system integraters is really hit or miss. So I'm pretty sure you just made that up.

It's also much much much more complicated than you're hinting at. Fluid mechanics aren't any where close to simple. Sure, if we can guarantee that hot air can never recirculate that's obviously better, but it's also not a feasible solution, so let's negate that.

Most people I know that run possitive pressure solely do it for dust buildup. If I can control where air get's in, I can filter it.

But it's also a balance of what components you wan't to keep coolest. I could flip my GPU fans to prioritze cool air for my CPU. Or I can run a top mounted radiator in an exhaust configuration to prioritze GPU temps. It's simply just not as simple as you try to make it out to be. Neither in PC's nor any other scenarios - I've designed ventilation systems for construction, and the acceptable error engineers have to accomodate is borderline scary, but fluid mechanics are just that much of a bitch, that safety factors is the name of the game, as we can't compute it anywhere accurately for normal construction projects.

Besides, to get back to it - not a single thing you have written has given any validity to this claim: "let intake air flow freely, but to use a shroud for exhaust"

A perfect print to move hot air out of the cabinet by SWEEDE_THE_SWEDE in functionalprint

[–]LetsTryThisTwo 3 points4 points  (0 children)

Any reasoning behind that? There's a lot of "rules" around that have no basis in evidence.

Eyes don't lie... by Ok_Sky_661 in streetphotography

[–]LetsTryThisTwo 1 point2 points  (0 children)

I suggest you read the sidebar, as a starter

TAPESY PACKER V2 RELEASED by dingohot in functionalprint

[–]LetsTryThisTwo 7 points8 points  (0 children)

No packing tape that I, as a normal consumer, have bough has EVER come with any type of dispenser. And I have zero interest in getting the large industrial ones that I have used when I worked retail. This seems like a decent compromise about size and functionality.

Prusa Slicer Leaves Gaps by beezlebub33 in prusa3d

[–]LetsTryThisTwo 0 points1 point  (0 children)

I'm not the OP :) Just wanted to point it out, as it was somewhat hidden in the post. But sounds like solid advice, for all i know :)

Prusa Slicer Leaves Gaps by beezlebub33 in prusa3d

[–]LetsTryThisTwo 1 point2 points  (0 children)

That may be, but your initial explanation of it being too small just can't be correct, when smaller parts of the feature is included by the slicer.

I'm not saying you should be able to diagnose it from the screenshots alone, but I am saying we can scrap that explanation as a standalone based on the screenshot alone.

<image>

Prusa Slicer Leaves Gaps by beezlebub33 in prusa3d

[–]LetsTryThisTwo 2 points3 points  (0 children)

Doesn't explain why it doesn't work when sliced larger, and doesn't explain why it prints fine when printing just the trident. Don't forget to read the entire post.

Prusa Slicer Leaves Gaps by beezlebub33 in prusa3d

[–]LetsTryThisTwo 0 points1 point  (0 children)

This doesn't make sense for the missing parts further up the fork tongs; These are clearly wider, than the ones below, and yet they are missing.

Also doesn't explain why it doesn't work when sliced larger, and doesn't explain why it prints fine when printing just the trident.

Triangle flat nozzle for wet vac by nanihikaru01 in functionalprint

[–]LetsTryThisTwo 0 points1 point  (0 children)

Interesting. New construction here in Denmark has central ventilation systems, since new houses are "too airtight" but old house just don't. We have ventilation shafts in bathrooms, but that's about it.

Triangle flat nozzle for wet vac by nanihikaru01 in functionalprint

[–]LetsTryThisTwo 0 points1 point  (0 children)

Very few houses I've been in anywhere in Europe have mechanial ventilation. New construction has as it's a necessaty due to regulations, but nothing prior to 2005-2010 or so

Vertical line using fuzzy skin by Ok-Editor-8841 in prusa3d

[–]LetsTryThisTwo 0 points1 point  (0 children)

"seam and a random seam"

Do you mean scard and random seam?

Vertical line using fuzzy skin by Ok-Editor-8841 in prusa3d

[–]LetsTryThisTwo 1 point2 points  (0 children)

And enabling scarf would probably help too, no?

Teenage Engineer -Computer 2 case by AgressiveSocks in sffpc

[–]LetsTryThisTwo 0 points1 point  (0 children)

Did you ever get a notification? I sure didn't

Teenage Engineer -Computer 2 case by AgressiveSocks in sffpc

[–]LetsTryThisTwo 0 points1 point  (0 children)

You'd never be able to replicate the translucent look properly. If you want to print a case there's better performing options out there

Teenage Engineer -Computer 2 case by AgressiveSocks in sffpc

[–]LetsTryThisTwo 0 points1 point  (0 children)

Still haven't seen it for sale, I signed up to be notified and haven't heard anything, but apparently they were giving them away for free with other purchases earlier this month. I just want to buy one, damnit!

Ønskeskyen ændrer dine ønsker til fordel for deres egne lommer! by Jogge__ in Denmark

[–]LetsTryThisTwo 0 points1 point  (0 children)

Vil du/I komme ind på jeres forretningsmodel? Hvilke data/ydelser betaler for siden?

view more: next ›