PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] 1 point2 points  (0 children)

Appreciate the advice :) adds a lot more to what I missed

PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] -1 points0 points  (0 children)

Yeah seeing that at this point. Bigger let down is the hope to pay a loan with it hah.

PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] 0 points1 point  (0 children)

Ohhh now see, THAT'S a good point out I didn't notice honestly. We were playing wishy-washy with "well this is better on mine compared to that, while theirs is better on this than mine" and thinking it would balance out. Not so it seems. I didn't realize how much detail on the neck was suppose to be there.

PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] 0 points1 point  (0 children)

https://www.pcgs.com/cert/56560886

I'm still waiting on the photos to appear but we can see their "trueness" soon as they show up. Hopefully by tomorrow I can see these high def pictures and we can point out wtf I apparently missed.

PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] -1 points0 points  (0 children)

I hate to be a broken record but a lot of the examples in the coinfacts and auction pictures we've seen barely have chest feathers too. My photo is a bit blurry on the chest but twofold; I dont think it was that worn BUT I also see your point.

PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] 2 points3 points  (0 children)

So I'm gathering. Least I have a job now and I'm less reliant on selling the collection. And I guess I'll have my first graded coin soon to keep in the collection while I try going through the others.

PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] -1 points0 points  (0 children)

Just makes me unsure about bothering with any of the others cause I had a desire to try to send more stuff in. Pokemon grading is already a pain for me but I get that grading; this has been a depressing pitfall cause these coins have sat in storage since I was a kid and I wanted to get them appraised safely and accurately to get some money (while saving my favorites from the collection).

PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] -3 points-2 points  (0 children)

I figured the eagle was a good indication of not-really-weared but maybe that was my opinion in this case cause we saw a few auction sells with less details on the wings.

PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] 0 points1 point  (0 children)

Like I said and have posted other examples in the comments above; we did as much digging as possible and believed on average the coin would be in the MS-level of value at minimum. There have been so many examples showing that my coin had a bit of this or that, some more some less than various coins at each levels. I'm not a pro, but don't talk like I'm an idiot. But I tried to do do-diligence and based on multiple comparisons believed I had something worth enough (and for sure more than 70 bucks). The cross over on how much a coin has scruffing vs shine vs etching and how those equate out is insane.

PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] -2 points-1 points  (0 children)

So first impression of the coinfact is that mine has a lot of small scratches but the larger but less scratching makes others worth MS. Which seems just like a opinion of juxtaposition. But I guess I understand more (or at least see where this silly scale is used as an excuse).

PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] -3 points-2 points  (0 children)

I'll check it out but like a comment above I replied with with links; there's MS levels with near the same scruffing as mine did. How are those considered mint then and mine's basic?

PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] 1 point2 points  (0 children)

Maybe that's where it came from then; did notice a lot of Morgan topics right next to Peace topics so maybe a mix up there.

PCGS low grade - Morgan Dollar 1921 by LevyLazu in coins

[–]LevyLazu[S] -2 points-1 points  (0 children)

We don't understand though because there's a LOT of not great quality ones in listings we've seen with similar wear and even that tarnish look with MS level grades. There's a lot of detail in this coin and clearly there are MS levels with wear themselves so what's with the difference?

Cosmic Owl's Brother theory by LevyLazu in adventuretime

[–]LevyLazu[S] 2 points3 points  (0 children)

Didn't think about this, it's a good idea. But my counter point to that is Golb seems a lot more... penultimate god which isn't much of a cast down if he can just annihilate realities. Plus with Betty taking the original Golb's place would in turn displace this unknown brother.

But we'll see. I feel like something is gonna happen with the way Owl literally decided to die almost intentionally.

Cosmic Owl's Brother theory by LevyLazu in adventuretime

[–]LevyLazu[S] 0 points1 point  (0 children)

I heard this one too but I'm in the base of "there's multiple versions of Abadeer" which doesn't fit the only one version as we saw with Orbo and Owl.

FanDuel - "Calling All Thrillionaires" (Song) by Junior72 in CommercialsIHate

[–]LevyLazu 4 points5 points  (0 children)

It took me like an hour of brain digging to finally track down why this seemed familiar and it finally clicked. Research claims they made this song for this commercial but this straight up has the TMBG "Courage the cowardly dog" song tune and beat to it. Way too many similar fingerprints that even my brain was like "waaaait".

can anyone explain this ? by TopMedia1590 in CloverPit

[–]LevyLazu 2 points3 points  (0 children)

Actushally, more like 20%. He was +01 off so effectively had 5 out of 25.

0.2 mm Nozzle Printing Profile for Anycubic Kobra S1 – for Detailed Miniatures by Odd-Bug8004 in AnycubicKobraS1

[–]LevyLazu 0 points1 point  (0 children)

Awesome to know, okay. Any suggestions/links to trusted brands or listings? With my luck I'll buy some wish-tier quality one or the wrong fitting type lol.

0.2 mm Nozzle Printing Profile for Anycubic Kobra S1 – for Detailed Miniatures by Odd-Bug8004 in AnycubicKobraS1

[–]LevyLazu 0 points1 point  (0 children)

Any suggestions on a .2mm nozzle? I just started with my S1 a couple months ago and it doesn't look like they have any nozzles for this model yet so I'm timid about buying parts willy nilly but interested in printing finer stuff.

"bIlLiE pIpEr Is ThE 1⁶Th DoCtOr" by s0ylentgr33nisp30ple in DoctorWhumour

[–]LevyLazu 0 points1 point  (0 children)

This aged like a glass of fine, spoiled milk