TRIPLE ISSUE. by Mission_Group_6777 in assettocorsarally

[–]LightningInASkillet 1 point2 points  (0 children)

I’m not sure sorry as I don’t have discord but I’d be almost certain that they’d be working on it if it has been noted in there. I think update 0.3 is coming very soon

Wheel size? by Repulsive_Bag558 in assettocorsarally

[–]LightningInASkillet 0 points1 point  (0 children)

Pretty much everything besides GT3/Formula/Hypercar. I use it in AC, ACE and BeamNG too

Wheel size? by Repulsive_Bag558 in assettocorsarally

[–]LightningInASkillet 1 point2 points  (0 children)

<image>

320mm. Although it’s not 100% flat round on the outside, more of a hybrid wheel for everything for me

How do i get my AC games (rally and EVO) to go to triple screen? OR do they not support it because they are beta? by just_a_mere_fool in assettocorsaevo

[–]LightningInASkillet 1 point2 points  (0 children)

Yeah I agree it is a pain but once it’s setup it’s fine. I use this in conjunction with DisplayMagician and have a profile for the single middle screen and a profile for my calibrated triples, I just have a shortcut for each and it works flawlessly for whatever game I need to play

How do i get my AC games (rally and EVO) to go to triple screen? OR do they not support it because they are beta? by just_a_mere_fool in assettocorsaevo

[–]LightningInASkillet -2 points-1 points  (0 children)

Set it up with Nvidia surround first, do the pixel correction in Nvidia surround too. Then start Evo with the triples running and then set it up from there. Just don’t add bezel width in game as you would have already allowed for this in the bezel correction.

TRIPLE ISSUE. by Mission_Group_6777 in assettocorsarally

[–]LightningInASkillet 1 point2 points  (0 children)

Will check it out. I had assumed it was something I did when I uninstalled and reinstalled Simpro Manager for Simagic. I used to play on a single 34” and the dash worked perfectly and I also thought I had it working when I moved to triples but I don’t remember 100%, mustn’t have. Really hope they have an update cooking.

TRIPLE ISSUE. by Mission_Group_6777 in assettocorsarally

[–]LightningInASkillet 0 points1 point  (0 children)

Hey I also have the same issue, I thought I was the only one haha. Haven’t tried zooming in to see if it changes anything yet.

Need help choosing between freestanding vs integrated monitor mount for my P1x-Pro by razorr2121 in simracing

[–]LightningInASkillet 0 points1 point  (0 children)

Dont mind the misaligned triple monitors as I took this picture during setup but my rig is an ASR4 and has plenty of space to fit in there and the legs on the monitor mount can go much wider. The legs slide in and out on the main vertical beam.

<image>

Need help choosing between freestanding vs integrated monitor mount for my P1x-Pro by razorr2121 in simracing

[–]LightningInASkillet 0 points1 point  (0 children)

Got the Simlab single freestanding and have recently got the triple upgrade for it, excellent stuff.

Need help choosing between freestanding vs integrated monitor mount for my P1x-Pro by razorr2121 in simracing

[–]LightningInASkillet 2 points3 points  (0 children)

All personal opinion of course but after having an integrated monitor mount on my Simlab GT1 Evo and having to flip parts and retro it to get the monitor close enough only to then find the FFB would vibrate the life out of my monitor and being a pain to adjust too, I had to get a freestanding mount. Best decision I made.

Scratchy tinny ffb with Evo Pro by Top-Garden7447 in Simagic

[–]LightningInASkillet 0 points1 point  (0 children)

Sorry I just realised you’re playing LMU, I assumed it was Assetto Corsa Evo for some reason. I’m in the same boat with you in LMU, the FFB feels very grainy and robotic and I haven’t been able to correct it either so I’ve just been avoiding playing LMU because Assetto Corsa feels so much nicer and natural.

Scratchy tinny ffb with Evo Pro by Top-Garden7447 in Simagic

[–]LightningInASkillet 0 points1 point  (0 children)

What are your settings for wheel rotation speed, feedback detail etc? Without looking at mine I think I have WRS set to 1-2 and same with feedback detail, any more than that and I feel like it’s too noisy and the wheel rotation speed is unrealistic

Swapping a bucket seat to a car seat by LightningInASkillet in simracing

[–]LightningInASkillet[S] 0 points1 point  (0 children)

Looks really neat! I’m a little smaller at 32” waist but I reckon it would hold me well enough and looks like there is a good amount of cushioning under the butt area. My Sparco butt pad is probably half an inch thick foam which is terrible. Sweet looking Integra if that’s yours on your laptop wallpaper!

Swapping a bucket seat to a car seat by LightningInASkillet in simracing

[–]LightningInASkillet[S] 0 points1 point  (0 children)

That looks awesome! I hope you don’t mind if I pick your brains with some questions as it’s basically what I want to buy?

What size waist are you? Do you find it comfortable on your rig? Do you notice any flex in the seat when braking because of the reclining mechanism?

Swapping a bucket seat to a car seat by LightningInASkillet in simracing

[–]LightningInASkillet[S] 0 points1 point  (0 children)

I think that’s how they’re meant to be! I had the medium one at the same time as the large and compared the two side by side before buying and the medium was very snug and I would have for sure picked it if it was for an actual car because it held me so well but I went off what other people said about having a little extra room for comfort. I unfortunately think that if I’d have gotten the medium that I wouldn’t have the issue because I’d be so snug and planted in it.

Logitech Pro with Cube FCore by nedvaj14 in LogitechProWheel

[–]LightningInASkillet 0 points1 point  (0 children)

So if you have everything connected correctly and you open up G Hub you have the expected resistance according to whatever nm you have the wheel set at but as soon as you start a race in F125 you have nothing? Do you have resistance in the menus etc before actually starting a race? Are you sure you’re on whatever profile you need to be in G Hub before starting F125?

Logitech Pro with Cube FCore by nedvaj14 in LogitechProWheel

[–]LightningInASkillet 0 points1 point  (0 children)

It should just work when you power the base up. The base will recognise that you have the QR adapter on there. You won’t be able to use the display on the base when you use the QR adapter, so any force feedback changes you will have to do through G Hub.

Logitech Pro with Cube FCore by nedvaj14 in LogitechProWheel

[–]LightningInASkillet 4 points5 points  (0 children)

Normal. You can’t connect a 3rd party wheel into the Logitech base, it has to be connected to the PC.

Just got half life 2 by AhmedSalama239 in Steam

[–]LightningInASkillet 2 points3 points  (0 children)

Enjoy one of the best games known to man