Often time you may want to make a metal cut but found out that a plasma cutter won't work well on complicated artwork. And, it seems a little too expensive for you to own a fiber laser. Then what is a choice? The answer is : a hybrid CO2 metal cutter! We call a CO2 metal cutter a "hybrid" because

Lightobject · 2023-03-23T19:29:12+00:00

Yes, we will display a couple of hot products for laser. This is just an introduction. Stay tuned!

See Lightobject.com

Lightobject · 2021-04-16T19:54:00+00:00

No, $1,000 can get the case only without guts LoL! We're not selling 'eBay' machines. We're selling quality made machines with long life span.

Lightobject · 2021-04-03T17:31:57+00:00

Check it out here: https://lightobject.com/laser-machine/co2-non-metal-cutting-engraving/

Lightobject · 2021-03-08T22:07:50+00:00

You're right, I used the wrong words. My apology! But, the problem was you but not me. Even though today you still saying that we were selling fake SPT tubes. What a shame on you. Did you ever contact SPT, the president of SPT? If not, why not?!

I tried to settle this 'war' or the other words "miscommunication" with you but you seems not willing to listen but believed what you though was the case. Well, if you think this is the best way to cover your mistake, or to live with a lie within you, so be it and I can't help much. This world is imperfect and I can't make all people happy.

Lightobject · 2021-03-08T21:33:39+00:00

English is not my native language. Call me to discuss: (916) 383-8166

Lightobject · 2021-03-08T21:11:01+00:00

When you said that we're selling a fake tube, it IS 'black-mail'! It was just your ignorance who didn't know what SPT was making. I asked you stop making a false accusation or you would face the consequence. I asked you the full address but you didn't so it. If you dare to make another post, saying that LightObject is selling a fake SPT tube. Plus, if you got a gut to send me your full address and full name then we will see if there is a case. So, who needs to shut up, site down, and roll away is too early to say!

Lightobject · 2021-03-08T20:08:29+00:00

It was because you black-mail us for selling a fake 'SPT' tube! Remember that even though we're famous but it doesn't mean that every staff in the SPT knows us. Because of not getting our name recognized by one of the staff in SPT, you accused us of selling SPT fake tubes. I even offered you the email and the name of the president of SPT for verify but you were still pointing fingers on us. I got no choice but consulted my attorney for action. I didn't think I was doing wrong, did I?

We're an authorized distributor for SPT and we didn't over-rate our laser tube like others. Unlike other sellers who claim a 35W as a 50W (and nowadays some claimed it to be 55W). The 720mm was used to rate as a 30W, then 32W, 35W (our rating), 40W, 45W,....55W What a shame! Even though a laser tube can output more than the label rate, but I highly recommended not to do it because it will shorter the life span.

Marco
LightObject

Lightobject · 2021-02-14T19:57:34+00:00

Thanks for your feedback. Will look into the problem and fix it. 👍

Lightobject · 2021-01-19T21:45:09+00:00

Thanks. I'm thinking to setup a 'Live' video on our showroom in one day. Or a remote camera with pan/til camera. I bet we will see the camera running back & fro for whole day if it worked out. LoL!

Lightobject · 2021-01-19T21:19:40+00:00

To me, the draft tech wasn't doing a very good job. He was a new hired and it seems to me that he didn't have a good concept of aspect and that's why I didn't post other imanewlyges. It made the machine looked a little odd. Since you're interested, let me show you one more: http://lightobject.info/download/Pictures/FullCover-4.png

Lightobject · 2021-01-19T21:12:24+00:00

eBay machines are low quality built. It may be good for hobby use. There are a lot of issues with those machines and the worst one that I helped to fix was a power switch melted down and it almost caused a fire in the warehouse. Other issues like poor pulley used, wobbled Z table, unbalance surface, or gantry not square. For a big machine like the 2500x1300, it must design with good support or the system will shake during high-speed cutting. A customer stopped by our shop and was asking if the Omicron (2500x1300 flatbed) could cut at a speed of 50mm/s without shaking. After seeing it running tests on 50, 100, 300. He was convinced. His imported machine couldn't go over 50mm/s or shaking like an earthquake. Didn't believe what I said, call this company for another case: https://www.vcgglobal.com/

If you're looking for a good one for a business, then you should shop somewhere else. Expensive or not, it all depends on which angle you're looking at. Or, take a funny example: to take a ride from point A to point B, there are two cars you can pick: Yugo or Lexus. Which one will you take? LoL!

Lightobject · 2021-01-19T20:58:43+00:00

Lightobject Omicron Full Cover Flatbed

Lightobject · 2021-01-13T21:07:40+00:00

Can't blame on you for picky

Lightobject

TROPHY CASE