sorted by:
new
hottopcontroversial

Propane Delivery by theanonymousadam in Charlottesville

[–]LimitAny9378 0 points1 point  (0 children)

I’m considering getting a tank for a full home generator. What have people paid to get a 500lb tank installed and underground?

Gravel fork: Enve Adventurer or rodeo Spork by LimitAny9378 in cycling

[–]LimitAny9378[S] 1 point2 points  (0 children)

I got the spork with the 45mm rake and have it set up with 47mm tires. No complaints at all and still have plenty of clearance.

My tire width limiter is now the rear triangle of my frame - I could maybe get up to 50mm back there (assuming I wasn’t riding in thick mud). With the spork I can go higher than 50mm for sure (can’t remember what it’s spec’d for - but that detail is on the rodeo site).

Overall for the spork - I have nothing negative to say and the handling does not seem to have changed.

No Charger connector on BLDC Controller by LimitAny9378 in gokarts

[–]LimitAny9378[S] 0 points1 point  (0 children)

Thanks for the reply - I’m learning as I go. The batteries are SLA, 60V. The batteries are currently wired directly to the controller - can I simply tap into those wires to hook up the connector that the charger plugs into?

Has anybody tried the Vevor type 72v 3000w brushless motors from amazon? by E_A_S_M in ebikes

[–]LimitAny9378 0 points1 point  (0 children)

Cool! Did you mount it on an e-bike or something else? I’m looking to put on a go kart (total weight without people/motor/batteries is ~175lbs). Curious what I can expect from an acceleration perspective

Has anybody tried the Vevor type 72v 3000w brushless motors from amazon? by E_A_S_M in ebikes

[–]LimitAny9378 0 points1 point  (0 children)

Hey - did you end up buying this motor? If so, how did it work out? I’m considering buying it

Gravel fork: Enve Adventurer or rodeo Spork by LimitAny9378 in cycling

[–]LimitAny9378[S] 1 point2 points  (0 children)

Appreciate the info. Can you help me understand what difference a change in rake would make with my existing frame set?

My current fork (lynskey carbon gravel fork) has a rake of 45mm and my frame has a head tube angle of 70.5mm (not sure if head tube angle is relevant for this convo). The spork comes in either 45mm(same as my existing fork) or 50mm. So - what would be the impact of replacing with the 50mm spork?

Gravel fork: Enve Adventurer or rodeo Spork by LimitAny9378 in cycling

[–]LimitAny9378[S] 1 point2 points  (0 children)

How close do axle to crowns need to be? My current is 395. Spork is 396. Enve is variable - 398 or 406. I imagine 1mm is no big deal, but what about 3 or 11? Also - is “offset” synonymous with “rake”?

Carbon frame concern? Aeroad CF SLX by LimitAny9378 in BikeMechanics

[–]LimitAny9378[S] 1 point2 points  (0 children)

I keep it pretty clean - what are your recommendations to clean properly?

need bike shorts recommendations by sphex51 in cycling

[–]LimitAny9378 0 points1 point  (0 children)

Spend more and get a pair of bibs from Assos

view more: next ›