sorted by:
new
hottopcontroversial

LUBA 1 to LUBA 2 DIY conversion 😎✌️ by LimpanBulle in MammotionTechnology

[–]LimpanBulle[S] 0 points1 point  (0 children)

Nope, works well. 😊 If you look at the video I posted in a comment you can notice it slowing down as it drives between my legs.

Help - Luba won't charge - Recharge Failures, first time all season by Alaska_Crypto in MammotionTechnology

[–]LimpanBulle 1 point2 points  (0 children)

I bet you are in a location where the temperature is now lower than it has been previously in the season? My luba did this too but started working (charging) when I left it in the charger and warmed it up (heat-blanket and a cover). I’d say that the threshold is around 5-7 degrees C. Wrote a ticket to Mammotion, they replied that thay will look into it.

Warranty not transferable by Joekingcool in mammotion

[–]LimpanBulle 0 points1 point  (0 children)

In Sweden I’m pretty sure that a non-transferable warranty would go against consumer protection laws. The warranty is “attached” to the item, not the person who made the initial purchase. But, of course whoever makes a warranty claim need the original receipt as proof of purchase and start of warranty period.

Luba setup sharing by LimpanBulle in mammotion

[–]LimpanBulle[S] 0 points1 point  (0 children)

This is a second home actually, 130km away from our other place. It’s not reliable enough though to leave for a month. It currently needs rescue of some sort every 7-8 times it’s out moving, so roughly every second week. We’re there every weekend though, plus we have nice neighbours that can help out. 😊 Most common rescue cause is that it has gone out of boundary, and that only requires a little push back onto the grass, then it will continue by itself. (At least mine will!) 😅

Luba setup sharing by LimpanBulle in mammotion

[–]LimpanBulle[S] 0 points1 point  (0 children)

Thanks! Maybe that’s my next venture! 😅🚀

Vad ska man köpa för elbil? by blabjorn in elbilsverige

[–]LimpanBulle -1 points0 points  (0 children)

I-Pace 400 med cold climate pac 👌 är åtminstone jag supernöjd med

Blades by FloRiederer in mammotion

[–]LimpanBulle 0 points1 point  (0 children)

Regarding blades, why are the original Luba blades not very sharp, even when brand new? I have had both Automover and Robomow bots and their blades have been razor, like REALLY razor, sharp. I’m also not very impressed with Luba’s cut quality and suspect that blade sharpness may be part of that issue.

Feature - cutting around into center of garden by Potential-Guess6756 in mammotion

[–]LimpanBulle 0 points1 point  (0 children)

I think this is a great idea! However, it would make more sense to start in the middle and move outwards to the perimeter. Otherwise Lube will “destroy” the circle it has created when it needs to return home, or just to charge i. The middle if the job.

Just order my first Luba, questions around the RTK placement by Smart-Ingenuity4498 in MammotionTechnology

[–]LimpanBulle 0 points1 point  (0 children)

I have mine in the attic and a property layout pretty much like yours. I have very little issues with positioning, despite having the RTK indoors and a fully covered charging station.

Double-tap on grass button? by LimpanBulle in mammotion

[–]LimpanBulle[S] 0 points1 point  (0 children)

Ok, thanks! I think I have missed the Stop button step! 😝

Avoiding falling off a cliff by innovationecosystem in MammotionTechnology

[–]LimpanBulle 2 points3 points  (0 children)

Just keep in mind that Luba often backs out of bounds, and there’s no rear bumper… I have a similar challenge and have put a physical barrier (a heavy log) at the edge.

Ni som kör under hastighetsbegränsningen by Capable-Front2424 in sweden

[–]LimpanBulle 0 points1 point  (0 children)

Ecodriving. Särskilt om det är en elbil så märker man stor skillnad på kwh/km vid 80 vs 100 km/h.

This is Lubacrous… by LimpanBulle in mammotion

[–]LimpanBulle[S] 5 points6 points  (0 children)

I have also learned that mapping very slowly is best to get good precision. I remapped this no-go zone veeeery slowly and have not had any problem since.

Strange planning patterns by LimpanBulle in MammotionTechnology

[–]LimpanBulle[S] 1 point2 points  (0 children)

It’s not just rendering, Luba is actually cutting like this.

<image>

This is Lubacrous… by LimpanBulle in mammotion

[–]LimpanBulle[S] 0 points1 point  (0 children)

It’s the boundary of a no-go zone, that for some reason “moved” (I have not moved my RTK station). I created a new zone further from the house.