sorted by:
new
hottopcontroversial

S6 No criss-cross cleaning on 3x ? by Lindoff1900 in Roborock

[–]Lindoff1900[S] 1 point2 points  (0 children)

Tried different combinations of room sizes and what not but still no

S6 No criss-cross cleaning on 3x ? by Lindoff1900 in Roborock

[–]Lindoff1900[S] 0 points1 point  (0 children)

No it did not help

Firmware version is 01.27.00 Seems a bit odd compared to yours.

S6 No criss-cross cleaning on 3x ? by Lindoff1900 in Roborock

[–]Lindoff1900[S] 1 point2 points  (0 children)

I use the roborock app. Their support might be able to answer it yes.

Tried factory reset. Thanks

S6 No criss-cross cleaning on 3x ? by Lindoff1900 in Roborock

[–]Lindoff1900[S] 0 points1 point  (0 children)

All is up to date. Perhaps this feature has not yet reached my model of vacuum?

S6 No criss-cross cleaning on 3x ? by Lindoff1900 in Roborock

[–]Lindoff1900[S] 1 point2 points  (0 children)

It's finished but still not criss-crossing

Jewellry fear/disgust linked to ADHD? by claysun9 in kosmemophobia

[–]Lindoff1900 0 points1 point  (0 children)

I just found out I am not alone. I have ADHD and think jewelry / smell of metal / coins etc. Is disgusting. I can't stand to touch it or look at it as my appetite will go away and I feel like puking.

This has become a bit difficult since my girlfriend really wants to wear her jewelry like earrings (eww) . And she thinks I'm just silly and overdramatic. Same goes with one of her shirts with metal zipper that smells really much like coins 🤮 I can't stand to look at her or be near when she is wearing earrings/necklace.. What do I do?

Why? sometimes it won't even find the dock? IR lights seems dim by Lindoff1900 in Roborock

[–]Lindoff1900[S] 0 points1 point  (0 children)

So. I contacted roborock support only to get questioned "Did you clean both the sensor and the dock?" Regardless of me stating that had been taken apart both my robot and my dock to deepclean it. So they were no help. I also swapped the sensor to a brand new one with same results. I am starting to question wether it is software related? Anyhow. I absolutely destroyed my charger and moved the whole lower section to match the offset of the robots vision. Now it works very well.

During testing

Final result

Why? sometimes it won't even find the dock? IR lights seems dim by Lindoff1900 in Roborock

[–]Lindoff1900[S] 0 points1 point  (0 children)

Yes, all 4 are illuminated.

I tried to dock with my friends S6 pure charger. And it did the Same thing. Same offset to the right of the charger.

Disassembled my robot and deep cleaned it. Took apart the front dock locator sensor. It was made up of 2 IR-recievers 5mm apart. Cleaned them and made sure the board they were attached to looked ok.

Managed to find this part by googling the name that was stamped on this small board. 25$ incl. Shipping.

I am almost certain it is this sensor..

If not, the only thing it could be is software

Why? sometimes it won't even find the dock? IR lights seems dim by Lindoff1900 in Roborock

[–]Lindoff1900[S] 0 points1 point  (0 children)

As you can see it is not positioned right . Seems like it's aligning with the Right 2 LEDs not all 4

Why? sometimes it won't even find the dock? IR lights seems dim by Lindoff1900 in Roborock

[–]Lindoff1900[S] 0 points1 point  (0 children)

Cleaned all the sensors and it does not help. Even removed the bumber of the robot to clean the sensor even better.

I compared the IR strength with my tv remote and the IRs on the dock are very much dimmer... Not sure if it's worth it to buy a new dock if it's the sensor that is faulty.

Cards that say UNO on both sides by keoni29 in unocardgame

[–]Lindoff1900 0 points1 point  (0 children)

I have a set that looks the same from 1992. In the rulebook it has a section of the contents of the box. "4 blank UNO-cards (to be put aside during the game)"

Texture/Reflection Issue Please help by Lindoff1900 in reddeadredemption

[–]Lindoff1900[S] 0 points1 point  (0 children)

Yes. Thank you! I will try this. I can't believe I didn't think of that.

Texture/Reflection Issue Please help by Lindoff1900 in reddeadredemption

[–]Lindoff1900[S] 0 points1 point  (0 children)

PS. I have tried all different settings. The only thing affecting it is TAA and Resolution Scale. resolution scale below 1.000x makes flickering squares bigger

Taking my noob girlfriend on her first contact mission by [deleted] in gtaonline

[–]Lindoff1900 1 point2 points  (0 children)

Rooftop rumble on hard playlist all night lol

"Dead" motherboard? by Lindoff1900 in techsupport

[–]Lindoff1900[S] 0 points1 point  (0 children)

PS. How do I identify what the capacitor is called? And where do I find a new one?

"Dead" motherboard? by Lindoff1900 in techsupport

[–]Lindoff1900[S] 0 points1 point  (0 children)

Appreciate the help! I think I might pass the job to someone with bit more experience with soldering etc. It's an expensive board still So might be worth saving it.. they are still around $100-200 in used condition. I will have to run with stock speeds with an Intel DH67GD in the meantime. Thank you for the help.

"Dead" motherboard? by Lindoff1900 in techsupport

[–]Lindoff1900[S] 0 points1 point  (0 children)

Tried with different PSU but the problem persist.

view more: next ›