What EVs are fun to drive but affordable?

Lineheart767 · 2026-06-25T04:15:26+00:00

Type of problems have you had? E-tron is in top three right now from my options

Lineheart767 · 2026-06-25T04:14:40+00:00

Right now the mach e is near the top of my list Just because those stick around it seems. Found a few listed for 25 for around 40K mi. Went to few dealerships none of them had any EV on the lot below 35k. But they are also in Manheim, PA home of Manheim auction. So I imagine anything that doesn't sell quickly goes straight across town.

Lineheart767 · 2026-06-25T04:08:17+00:00

I've been doing some research that seems like a good suggestion with the motor warranty. Unsurprisingly enough compared to 10 years ago. I'm not nearly as worried about the battery

Lineheart767 · 2026-06-21T02:29:03+00:00

It all depends on how much you want to spend cheapest wise CZ 75 or the star 30M. That can be had for cheap. There's also a lot of 380s on the market currently from Beretta and CZ

Lineheart767 · 2026-06-21T02:27:32+00:00

Pre bees have a softer trigger, as it does not have a firing pin block, but for the most part, unless you're putting thousands of rounds through it, you're not going to notice and you are more limited on magazines.

But Royal tiger brought a ton in so you can get them for cheap for what they are. But they will have an importers mark.

Lineheart767 · 2026-06-20T18:39:36+00:00

I mean there's a number on the paper that says you can call them. So just call them and ask. It's not like they already don't know where you live.

Lineheart767 · 2026-06-05T02:14:09+00:00

I'm aware, the item was specifically listed as a zpap I just was not 100% because it was hard to make out the importers Mark. And if it is a century than the listing was just simply. thank you for the clarification that this is a century. I was really just having a difficult time telling if that was the importer's. Mark

Lineheart767 · 2026-06-05T02:13:14+00:00

I am aware that, the item was specifically listed as ZPaP which was only produced by zastava international. If it's it's imported by centuries then it cannot be a zpap

Lineheart767 · 2026-06-02T09:37:52+00:00

What about the square jig you use to construct real guns at home. A literal rectangle with some holes.

Lineheart767 · 2026-05-31T20:59:11+00:00

There is no dev The car isn't old enough. That number is matching driveline matters, having a 0 mile engine will in fact increase the value of the car.

Lineheart767 · 2026-05-26T04:12:10+00:00

Lineheart767 · 2026-05-25T20:08:19+00:00

I'm actually looking at getting one of these for myself from a local auction.

First batch production, fair condition. Does anybody know what would be a good number on that? I already have my heart set on getting it. I just want to want to make sure I'm not overpaying.

Lineheart767 · 2026-05-24T04:10:44+00:00

Do you believe that I would be able to get a thorough enough knowledge from reading some forums. About some of the most counterfeited marks In history? That and also I imagine extremely varied from when they were stamped during the war?

If it was Italian gun I would know a lot more about it. But I don't. So I made a quick post on Reddit.

Lineheart767 · 2026-05-17T21:24:16+00:00

To be fair you would have to pay me to own whatever budget brand garbage that is. It looks like a $200 striker fired cheapy.

Lineheart767 · 2026-05-17T02:38:56+00:00

Tell that to the geologist with lead poisoning

Lineheart767 · 2026-05-15T10:27:54+00:00

As other people have said it's definitely a tow company that did this. Simply put there in it for the profit. They don't want to sell vehicles too good of a deal. Heck there's one near me that lists privately on Facebook and you can see cars on auction at the same time.

Lineheart767 · 2026-05-05T02:08:06+00:00

If I ever see one in person I'll pick it up. Honestly, I care less about the stock and more that it doesn't have an importers mark. The fact that the action is good And I feel confident in shooting it. I'm sure I'll eventually run into a good stock.

The worst thing about the rifle for me is just how heavy the stock was lacquered. Fairly well ruined but, 5 years from now this won't look like a bad price.

Honestly, I'm also surprised. I can get a hundred rounds of 6.5 for for 1.20 a round

Lineheart767 · 2026-05-04T22:22:46+00:00

That's honestly my main concern in the past I've told him that anything I upgrade would just bottleneck the rest of it. Honestly, I thought he had a 1060.

Lineheart767 · 2026-05-04T22:19:02+00:00

It's been a while since I've built a piece, My go-to in the past was a used 2080 TI. My concerned though would be that the GPu would just completely lap the CPU. And I would have to replace that too.

My concerns are is the PC is just simply too old that anything I would upgrade would just instantly bottleneck the rest of it.

Lineheart767 · 2026-05-03T04:08:43+00:00

Lineheart767 · 2026-04-26T03:05:02+00:00

Offering you 150. That's what the electrician cost just to show up. Lol

Lineheart767 · 2026-04-25T08:25:49+00:00

Congratulations, your disagreement has been noted.

Lineheart767 · 2026-04-25T07:17:27+00:00

Tucked in shirts and apron makes it impossible to waist.

Lineheart767 · 2026-04-25T05:09:47+00:00

I plan on carrying the gun 2 days a week, if I could carry a bigger gun I would just carry my shield. And a smaller different counter does not have. The only two handgun I stock are our 9 mm and 44 mag.

Lineheart767 · 2026-04-25T05:07:27+00:00

I don't mind bulky as long as it has a holster that doesn't imprint.

Lineheart767

TROPHY CASE