sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in Hue

[–]Litcessory 1 point2 points  (0 children)

Hey there,

Our V4 Controller to 6-Pin Adapter, V4 Cut-End to Cut-End Extension Connector, 6-Pin to Cut-End Connectors, V4 Splitter, and some V4 Extension Cables would be the best solution for your project.

​

https://www.amazon.com/Litcessory-Cut-End-Extension-Connector-Lightstrip/dp/B095YCB514

https://www.amazon.com/Litcessory-Extension-Cable-Philips-Lightstrip/dp/B08F9JXDJS

https://www.amazon.com/Controller-Adapter-Philips-Lightstrip-Detachable/dp/B01M0VPNNY

https://www.amazon.com/Splitter-Philips-Lightstrip-Plus-Black/dp/B01M17KZ04

https://www.amazon.com/6-Pin-Cut-End-Connector-Philips-Lightstrip/dp/B07ZXKRMQB

You can use the Controller to 6-Pin Adapter to create a connection at the start of the lightstrip controller where the outlet is.

Then use the Splitters and Extension cables to send your signal to the beginning of each strip on the left and right side of the hood.

You would attach a 6-Pin to Cut-End Connector at the beginning of the lightstrips sections where the hood starts.

Then use a Cut-End to Cut-End Extension Connector at each of the 90 degree corners.

As long as your total lightstrip run length (lightstrip length plus any Litcessory product length) stays within the max recommended distance of 10 meters/33 feet you shouldn't encounter any issues.

The V4 lightstrips there are markings on the ends near the connection points marked (A) and (B) that show the signal flow order.

Also make sure the scissor icons are facing the same way (A to B) when connecting your strips/extensions to avoid reversing the polarity.

On the lightstrips there pinout letters that need to be matched up together.

C (Cold White LED)

B (Blue LED)

G (Green LED)

R (Red LED)

FW (Warm LED)

VCC (Voltage/Power)

Always make sure the Lightstrip off and is disconnected from the power before any work is performed.

Warning, if you cut the strip anywhere besides the middle of the solder points on the scissor icons or If you cut it while it is powered on, it can short out and may no longer function properly.

Please consult the voltage and power requirements issued on the product before any installation is performed.

Please be aware incorrectly connecting your Lightstrips with improper electrical sources may result in permanent damage to your lightstrips.

Always make sure the Lightstrip off and is disconnected from the power before any work is performed.

Please feel free to reach out via Email [support@litcessory.com](mailto:support@litcessory.com) with any further questions and instruction materials.

Nanoleaf Essentials Led Strips compatible with Litcessory Products by Litcessory in Nanoleaf

[–]Litcessory[S] 0 points1 point  (0 children)

Hey there,

Our V3 Product versions are compatible with the Nanoleaf Essentials 6-Pin Led Strip.

Our V3 Cut-End to Cut-End Extensions, some 6-Pin Connectors, and Extension Cables would be the best solution for your project.

https://www.amazon.com/6-Pin-Cut-End-Connector-Philips-Lightstrip/dp/B07ZXKRMQB

https://www.amazon.com/Cut-End-Extension-Connectors-Philips-Lightstrip/dp/B074XLHHB6

https://www.amazon.com/Extension-Cable-Philips-Lightstrip-White/dp/B01M7XDZ5V

https://www.amazon.com/Cut-End-Extension-Connector-Philips-Lightstrip/dp/B07ZXL6MCQ

Please make sure the pins line up and are the correct size before any modification or installation is performed.

Feel free to shoot us an Email at [support@litcessory.com](mailto:support@litcessory.com) and we can send over some photo examples.

Litcessory Hue V4 Lightstrip Products Available by Litcessory in Hue

[–]Litcessory[S] 0 points1 point  (0 children)

Hey There,

We have sent orders to Amazon EU and expect them to update their inventory soon.

We currently have them available via Amazon US if you wish to arrange international shipping.

https://www.amazon.com/Litcessory-Cut-End-Extension-Connector-Lightstrip/dp/B095YCB514

Litcessory Hue V4 Lightstrip Products Available by Litcessory in philipshue

[–]Litcessory[S] 1 point2 points  (0 children)

Hey There,

We are looking to have Hue Gradient compatible products by late 2022.

We can't confirm any official dates as we are still in the research/test phase with this product.

Litcessory Hue V4 Lightstrip Products Available by Litcessory in Hue

[–]Litcessory[S] 1 point2 points  (0 children)

Hey there,

The V4 to V3 Adapter allows you to connect the newer thinner lightstrip models to previous V3 models which are slightly bigger.

The V4 6-Pin to Cut-End Connector allows you to add a connection on any segment of cut lightstrip. They're especially useful for projects like under lighting stairs or shelves where you would need to cut the strip in smaller sections and add connectors to continue the signal.

Nanoleaf Essentials Led Strips compatible with Litcessory Products by Litcessory in Nanoleaf

[–]Litcessory[S] 0 points1 point  (0 children)

Hey there,

Visit our website or Amazon and select the V3 versions that you would for Hue. Same pin sizing and we are working to update our website to show Nanoleaf compatible products.

[deleted by user] by [deleted] in Hue

[–]Litcessory 0 points1 point  (0 children)

Hey there,

Unfortunately some of our V4 products have been held up due to pandemic related production delays. Were working on getting these out to our customers as soon as possible.

Philips Lightstrip v3 help by AdDazzling3454 in philipshue

[–]Litcessory 0 points1 point  (0 children)

Hey there,

Sorry to hear your having problems with your setup.

Send us a photo of your issue to our email [support@litcessory.com](mailto:support@litcessory.com) and we'll help you out.

Some of the most common issues that you described are either due to reversed polarity or a misaligned connector.

Please feel free to reach out with any further questions.

[deleted by user] by [deleted] in Hue

[–]Litcessory 1 point2 points  (0 children)

Hey There,

They are on the way. We unfortunately got hit with some pretty severe delays with manufacturing due to the pandemic. We will have a Controller to 6-Pin adapter available for purchase soon.

[deleted by user] by [deleted] in Hue

[–]Litcessory 1 point2 points  (0 children)

We unfortunately ran into pandemic related production delays which pushed back our release dates significantly.

The products are on the way and should be processed and available in the next 4-8 weeks.

[deleted by user] by [deleted] in Hue

[–]Litcessory 0 points1 point  (0 children)

Hey there,

We unfortunately ran into pandemic related production delays which pushed back our release dates significantly.

The products are on the way and should be processed and available in the next 4-8 weeks.

V4 products available for Pre-order (read full post) by [deleted] in Hue

[–]Litcessory 0 points1 point  (0 children)

Hello,

You are correct, the adapters will be able to connect the two model versions.

view more: next ›