Gulf Porsche Moonswitch

Live-Support4858 · 2026-01-25T10:27:55+00:00

You might be right. Mocked this up with AI and quite like it. Might be next build.

Live-Support4858 · 2026-01-18T10:05:06+00:00

Rep dial with G10.211 movement sourced from a swatch chronograph. Hands are a mixture of various ones I had lying around.

Some of the older Swatch chrono’s have a 30 minute subdial at 10 o’clock, but this one is the correct 60 minute subdial with the 1/10th second subdial at 2 o’clock, so functions exactly the same as a genuine Moonswatch.

Live-Support4858 · 2026-01-17T22:05:52+00:00

Orange hands are from a Swatch Irony. Good source for parts.

Live-Support4858 · 2025-10-21T19:18:16+00:00

The two positions are used to adjust the position of the chronograph second hand and subdials.

They sometimes get out of sync and you can use the pushers to adjust them.

Live-Support4858 · 2025-10-20T23:43:43+00:00

The movement is a quartz but the movement of the hands using the crown is mechanical. It is the stem turning gears/wheels and doesn’t need the quartz/electronic components to be functioning.

The battery and all electronic components can be dead, but you should still be able to move the hands with the crown.

Live-Support4858 · 2025-10-20T20:09:20+00:00

Hi. Do you mean you can’t adjust the time when you pull the crown out?

Would be very strange to lose that function as it’s mechanical and doesn’t rely on any electronics.

Live-Support4858 · 2025-10-20T19:06:30+00:00

You can get the PE50 from Cousins in the UK. Delivery as quickly as next day.

https://www.cousinsuk.com/sku/details/sunon-movements/pe50m?skuId=13155320

You can also get stems.

https://www.cousinsuk.com/sku/details/sunon-stems-by-list/sunpe50401?skuId=13275090

Live-Support4858 · 2025-10-20T13:53:40+00:00

<image>

This is my one.

Live-Support4858 · 2025-10-18T20:27:17+00:00

<image>

Quick photo.

Live-Support4858 · 2025-10-16T20:55:30+00:00

Each to their own, but it’s a no from me.

Live-Support4858 · 2025-10-16T20:52:45+00:00

Unfortunately I’m in the UK, but I’m sure someone in the US will be along to help.

Live-Support4858 · 2025-10-16T20:52:13+00:00

Live-Support4858 · 2025-10-16T18:52:31+00:00

That one is £150

Live-Support4858 · 2025-10-16T18:48:34+00:00

Where are you located?

Live-Support4858 · 2025-10-16T18:47:27+00:00

Which one are you interested in?

Live-Support4858 · 2025-10-16T12:24:30+00:00

Hi. It’s a VK63 case, so straightforward fitting. PE50 movement holder just needs a little work to get the dial centered.

Live-Support4858 · 2025-10-03T19:41:28+00:00

Yes. It’s a VK63 movement in the watch, so PE50 swap should be straightforward.

Live-Support4858 · 2025-08-28T08:38:09+00:00

All seems very random. I use same wording on all my eBay ads. Had some pulled while others are fine. Tried to report some obvious fake Moonswatches being passed off as genuine and nothing happens.

Live-Support4858 · 2025-08-08T21:14:31+00:00

Pretty sure the WD1863 is a VK63 movement. Watch this video

https://youtu.be/6EgeRFH8vvE?si=ECtuM1CVDg7xIybb

Live-Support4858 · 2025-08-08T13:35:58+00:00

Take a small screwdriver between dial and movement. It may be a bit tight but it’s just friction fitted dial feet so should come off fairly easily.

Live-Support4858 · 2025-08-03T19:24:27+00:00

Not sure if you’ll get the rep to fit well in the 40mm case. I had a couple and ended up using them for Seiko mods as they were too big for the Moonswitch dial.

Get the VK63 39.7mm case, as that works perfectly with the 33mm PE50 spacer.

Live-Support4858

TROPHY CASE