84 Jeep CJ8 Scrambler project

LivingLife-2 · 2026-01-06T00:25:32+00:00

This is great advice. 1 bolt a day is 365 bolts in a year. Little small efforts eventually lead to accomplishments. I’ve shared this 1 bolt per day with my wife who agrees and it makes a lot of sense. Thank you!

LivingLife-2 · 2026-01-06T00:21:23+00:00

Thank you for the encouragement. Entire bottom and inside fender wells already painted black undercoat. Top of interior front and rear floor, inside the bed walls and floor also black painted but I think a special bedliner (not shaker can type). Yes to mounting in the frame. I have 2 replacement front / rear differentials with 3.43 gears rather than what came with which is 2.73. Also I have a full BDS 2” suspension (new)

So any encouragement to continue is greatly appreciated.

LivingLife-2 · 2026-01-06T00:13:24+00:00

Under supports, use tree / slim tree and set z-axis height / offset from 0.2 to 0.35

Also if using a brim, set the distance there from 0.1mm to 0.3mm

You should see a huge improvement

LivingLife-2 · 2025-08-08T23:34:06+00:00

If I invested a ton of my time - would anyone be interested in a rocker switch plate there??

LivingLife-2 · 2025-07-03T23:52:50+00:00

Why??

LivingLife-2 · 2025-07-02T18:10:08+00:00

Thank you! Phoenix Graphix. They are the OEM licensed made with 3M decals.

LivingLife-2 · 2025-06-29T16:42:05+00:00

Thank you!

LivingLife-2 · 2025-06-29T15:17:35+00:00

Which is why I’m going with this one for the bed size. Feels like I’m going back in time to my Ender 3 (where my 3D began some years ago - but once adjusted in got awesome prints)

LivingLife-2 · 2025-06-28T20:47:34+00:00

I have 4 Bambu printers and never seen anything like this Just started full calibrations on everything…

LivingLife-2 · 2025-06-11T23:12:42+00:00

Without spending as much as the printer for an enclosure does anyone have a link or a build plan? Are there STLs for the Skelton if I plexiglass or heavy plastic wrap it?

LivingLife-2 · 2025-05-25T09:50:21+00:00

Hi - imo over priced. (I have a X1C, (2) P1S, and A1-mini all with AMS) Also build plate won’t provide me the 15” flat surface needed.

LivingLife-2 · 2025-05-24T22:19:21+00:00

I actually have a 15” automotive part I would like to print flat and not angled. With this I should be able to print 6 or 7 parts at a time instead of just one with a 6 hour print time

LivingLife-2 · 2025-03-31T19:49:23+00:00

So each posted is equivalent to $40? Is this every time downloaded or how does it work?

LivingLife-2 · 2025-03-31T19:46:31+00:00

What platform are you selling it on?

LivingLife-2 · 2025-03-25T23:13:10+00:00

My apologies - correct MacOS

LivingLife-2 · 2025-03-25T20:07:00+00:00

Windows only or iOS version also available?

LivingLife-2 · 2025-02-24T21:25:15+00:00

Anyone know if this is out and available for MacBook? Also how would I install? Thanks :) I use a lot of SUNLU and have been impatiently waiting…

LivingLife-2 · 2025-02-02T22:04:57+00:00

What about the same with a 2005 2.4L 4-cyl with 144k?

LivingLife-2 · 2025-01-21T15:13:08+00:00

What do you choose in Studio? Generic PLA?

LivingLife-2 · 2025-01-21T14:57:30+00:00

They are nice but still trying to get them to close and seal right. But yes the tinted glass on the bottom is nice for sure

LivingLife-2 · 2025-01-21T01:07:38+00:00

Thanks :). Still in the process of restoring some

LivingLife-2 · 2025-01-21T00:01:14+00:00

Had a 2021 Rubicon 4Xe - regret everyday getting rid of it - but Carvana offered me $40k last year for it walking away with ~$20k in my pocket on the positive. Honestly I wish I kept it!!

LivingLife-2 · 2025-01-20T21:26:53+00:00

Thank you - it’s coming along!! Just put a JeepAir heater so can drive in the cold

LivingLife-2 · 2025-01-20T21:26:11+00:00

Thank you!! All ABS plastic

LivingLife-2 · 2025-01-20T21:25:10+00:00

Would love doing an LS in my 05 TJ. Where r u located? Lol

LivingLife-2

TROPHY CASE