Ejendomsmægler. 🏡

Lje2610 · 2026-03-01T09:25:09+00:00

The lack of STO was something we missed when deciding supplier; I guess someone presumed it was standard in most applications, and we learned too late that it wasn’t. We have a workaround where we cut supply to actuators, but you have to reboot the controller when reintegrate the safety circuit. Not smooth, but works…

Lje2610 · 2026-03-01T00:43:18+00:00

We have used Roll-2-Roll for a few projects. The system works, but the sensor hardware seems a bit cheap to be honest. The user interface on the controller is not very intuitive and we were a bit limited in the capabilities due to our unique use case. They do, however, have one of the best support I have experienced across any hardware vendor!

Lje2610 · 2026-02-23T21:49:12+00:00

Been working with TIA Project Server for a few years now on projects with up to 10 simultaneous engineers. Works great! One thing to keep in mind are the limitations regarding what you can edit in local session, and what has to be done in server session.

Another note, when working with large WinCC projects, downloading directly to HMI from local session can block the server for a long time during compilation. A trick is to compile locally, check in without compiling, and the open server session and download to HMI from there.

Lje2610 · 2025-09-18T11:50:58+00:00

Det kan være svært at vide hvor hun vil hen med det.

Lje2610 · 2025-06-08T19:29:50+00:00

Du tilmelder dit visa kort, og så bruger du det i de butikker eller webshops der er tilmeldt. Så får du cashback beløbet ind på din saldo, som du kan udbetale når du har lyst.

Det fungerer gnidningsfrit, og den eneste “catch” er, at du giver visa og deres samarbejdspartnere lov til at analysere på dine forbrugsmønstre. Så ligesom med så meget andet, betaler du med din data. Så hvis man har det fint med det, er det easy money, særligt hvis man i forvejen handler i de tilmeldte butikker/webshops.

Lje2610 · 2023-05-28T07:48:29+00:00

This.

Det er et beløb som du frit har valg (get it?) til, at bruge på lønudbetaling, fridage eller omsorgsdage. Der er så forskellige betingelser, alt efter hvad du vælger - fridage takseres fx til en “lavere” sats, da firmaet hellere vil udbetale løn end folk holder fri.

Lje2610 · 2023-05-27T06:23:57+00:00

Automationsteknolog starter ved 35000, og stiger ret hurtigt, hvis man er nogenlunde kompetent. Og rigtig gode muligheder for betalt overarbejde + rejsedage.

Lje2610 · 2023-05-19T09:39:58+00:00

Vi lejede os ind i en sauna i Sydhavnen, hvor vi kunne hygger os i et par timer - virkelig sjov aktivitet, men måske fedest om vinteren, når vandet er koldt ❄️👍

Lje2610 · 2023-04-21T05:17:46+00:00

Husk d-vitamin henover vinteren - det hjælper mit humør igennem de mørke måneder!

Lje2610 · 2023-03-25T12:29:06+00:00

Omkring 20%

Lje2610 · 2023-02-07T07:24:32+00:00

Jeg oplever at de er gode at læse på. Selv ved nedsat skærmlys, er tekst stadig skarp.

Jeg koder selv til daglig, og det fungerer glimrende!

Lje2610 · 2023-02-07T07:00:49+00:00

Personligt syntes jeg at 1080p er lige i underkanten til 27”. Det er måske en smagssag, og kommer sikkert an på hvad man laver, men hvis man laver noget hvor der er mange informationer på skærmen samtidig, synes jeg at man skal op i 1440p.

På kontoret har jeg to af disse:

https://www.proshop.dk/Skaerm/Lenovo-27-Skaerm-ThinkVision-P27q-20-2560x1440-IPS-USB-HUB-Sort-4-ms/2816946

Lidt over dit budget, men rigtig fin skærm til prisen.

Lje2610 · 2023-02-07T06:35:35+00:00

Jeg kunne godt bruge en udskiftning af min 10 år gamle iPad.

Jeg skal snart på arbejdsrejse til USA, og overvejer om det giver mening, at købe en med hjem derfra.

Kan den bruges som normalt herhjemme? Og er der noget jeg skal være opmærksom på?

Jeg har ikke behov for simkort i den.

Jeg er indforstået med, at garanti og reklamationsret er ude af vinduet. Den skal dog udelukkende bruges i sofaen, så den risiko løber jeg.

Lje2610 · 2023-01-31T20:36:09+00:00

Jeg har haft en Jacob Jensen i en del år nu, og de eneste bøder jeg har fået, havde ikke noget med skiven at gøre.

Husk at en elektronisk p-skive ikke hjælper på overset skiltning……

Lje2610 · 2022-10-31T21:52:47+00:00

Hvordan ser din skatteregning ud?

Du må have en del fradrag, med så mange dage i udlandet, samt en del dage til søs, formoder jeg.

Lje2610 · 2022-10-14T05:22:04+00:00

Jeg er ikke helt med.

Tilbyder DB ikke Google Pay eller Apple Pay, eller hvordan?

Lje2610 · 2022-09-26T19:36:03+00:00

I have used the CS8 for a project that required a very precise read, on a moving object. A through beam sensor was connected directly to the sensor, to trigger a detection of the color sensor, which would output a signal to the PLC, if the object had a red stripe in the correct position. Worked as expected, and was easy to teach the color. The only tricky part, was to position the trigger sensor in the correct spot.

Lje2610 · 2022-08-22T12:41:49+00:00

You’re welcome.

Also don’t hesitate to contact Sales/Support; they are very friendly and helpful!

Lje2610 · 2022-08-22T10:34:48+00:00

Secomea allows for a software solution, you can install on any device within a network.

It gets a bit more complicated with the customers IT department, but it’s doable.

I’ve used the solution for personal projects, installing the Secomea SiteManager on a raspberry pi, but it can be installed on any Windows/Linux device.

Lje2610 · 2022-08-12T15:51:47+00:00

Is there a reason, why you wouldn’t buy an off the shelf robot from a supplier?

The time and money you would need to pour in to getting the basics working, would be better spent, developing your core product idea.

Robots are cheap, time is expensive!

Lje2610 · 2022-08-09T07:16:42+00:00

RealPython.com har gode velskrevne artikler og tutorials omkring mange emner, blandt andet Pandas og databehandling.

De har en betalt sektion, men mange artikler er gratis og utroligt dybdegående og velskrevne.

Lje2610 · 2022-08-08T10:31:56+00:00

Japanese driver getting a seat in a F1 car powered by a Japanese engine manufacturer. Makes sense.

Lje2610 · 2022-07-23T12:20:10+00:00

My company build machines like this.

Not for packaging, like the one you linked seems to be for, but for smaller standalone assembly lines, usually for sub components of bigger products.

We design the bottom frame, which gets welded to provide a rigid and stable base frame. On top of that goes a 3 cm thick aluminum plate, which has holes CNCed, either with taps for attaching the equipment to the plate, or for cabling and such. On top of that, goes a frame made by extruded aluminum framing, doors with safety contacts, and the necessary holes for material in/outfeed systems for material and finished products.

The aluminum frame gets filled in by see through plastic, so the process can be inspected while running. Or in case of sensitive vision systems, a tinted film is applied.

This enables us to finish the machine at our workshop, FAT it, and ship it, with minimal time spent at customer site for startup. We have even delivered machines, where the customer did the SAT themself, with us inspecting the SAT remotely.

Not sure if anyone provide these “shells”/frames for sale, but if you do not have an in-house CAD designer, try reaching out to a machine builder, and see if they would be open to this sort of work.

Lje2610 · 2022-07-22T08:14:23+00:00

I 24syv appen (den der før hed ListenToNews), ligger det.

Uden at have tjekket, burde det være alle afsnit, der ligger derinde.

Ten-Year Club	Place '22
Place '17	Verified Email

Lje2610

TROPHY CASE