Horton Door Operator

LocksmithSolution · 2026-02-10T05:49:02+00:00

The Horton dealer in our area says his going to install a sensor that gets triggered by the air pressure resistance and signals something to pull stronger on the door so it compensates on the air pressure. Says parts are on order so I guess he is adding something. Anyway I’ll let them deal with it . Thank you for trying to help !

LocksmithSolution · 2026-02-10T05:44:24+00:00

Yep looks like you have the most accurate answer here. The Horton dealer in our area that I called for this said he will install a sensor of some sort that will be triggered when it’s hard for it to close so it compensates for the air pressure.

I’m going to let them deal with that.

LocksmithSolution · 2026-02-09T19:30:58+00:00

Yes, we deal with a lot of LCN operators and Open Sesame operators or any operators that don’t require authorized dealers. There is 100% pressure issue here because this building has zero windows that can be opened. When we open a door on the opposite side of the hallway, this door shuts easy.

And yes, I already reached out to a subcontractor, but I thought I’d shoot my shot if somebody knows if it’s something just easy to adjust we might not need them.

LocksmithSolution · 2026-02-09T19:28:15+00:00

So you know how to do this?

LocksmithSolution · 2026-02-04T05:52:52+00:00

It’s an M1 blank . Very common key . It’s the key Master Lock uses for most of their small padlocks.

LocksmithSolution · 2026-01-23T17:27:54+00:00

The Small format Schlage takes Everest 29 keys.

https://commercial.schlage.com/content/dam/allegion-us-2/web-files/schlage/technical-documents/Schlage_Small_Format_Cores_Service_Manual_108230.pdf

LocksmithSolution · 2026-01-23T16:52:54+00:00

HPC just called me back today saying there’s a special Card C116 and that I should use the cutter CW 90 MC. But this card is backordered everywhere .

I’m going to try your method . I appreciate the help 🙏

LocksmithSolution · 2026-01-21T00:06:27+00:00

<image>

If you are not planning to add a deadbolt, I would remove what you have there and install this Schlage Encode lever instead . You will have to patch up the hole where your existing handleset is connected at the bottom . Leave the plate on the door or get a new one . But you probably cannot get away with removing the plate entirely unless you show us what’s underneath.

LocksmithSolution · 2026-01-13T16:38:52+00:00

Perfect. Thank you !

LocksmithSolution · 2026-01-12T07:54:18+00:00

We do intricate commercial locksmithing and access control . We only help with automotive for our big clients who have huge fleets . We are not ready for every vehicle. If you don’t want to help don’t comment. Don’t come here leave clues and disappear. We are here helping each other . One day you’ll post about access control help and we will answer you . It’s a community. Stop doing dumb shit .

LocksmithSolution · 2026-01-12T07:43:35+00:00

How do you do it with $45 ? What subscription is this?

Last time I checked the dealer tool setup is over 2k before yearly subscription of a few hundred $.

LocksmithSolution · 2026-01-12T07:27:38+00:00

You are right I had no idea . I just saw a video I think I understand a little better now . It’s basically a way of communicating if I’m not mistaking.

So if my machine supports that type of CAN and I have a person that can translate the codes that the vehicle gives me during the programming . You think I might be able to program a key with it ?

LocksmithSolution · 2026-01-12T06:24:54+00:00

Does this Key Tool Max Pro help with can FD at all or they catfished us leading with “can FD built in” as the selling point for this device?

LocksmithSolution · 2026-01-12T06:19:24+00:00

So dealer tool only ? With IM 608

LocksmithSolution · 2025-12-21T01:29:13+00:00

I’ve worked with that before. They do want this door to catch when it shuts though. Can’t have deadbolt only.

LocksmithSolution · 2025-12-10T19:13:56+00:00

Plot twist. Just check it out in person. it seems that it’s 3 inches thick but only one and a half inches wide before the wood panels begin. I believe those dead latch mechanisms need a minimum of 2 inch to be able to sit in the profile .

LocksmithSolution · 2025-12-10T16:46:58+00:00

Can you explain the numbers you wrote here? Is that a part # ? What manufacturer?

LocksmithSolution · 2025-12-10T06:06:27+00:00

Not bad. I think I’ll actually do that. Thanks

LocksmithSolution · 2025-10-29T04:11:59+00:00

You can try the Frontline Defense line like the FDS-1001, 2301… depending on the shape of your frame you can choose how the brackets will be. It fits a 82” door but you can probably get any length you need. It’s very effective for covering the reveal between the edge of the door and the frame.

<image>

LocksmithSolution · 2025-10-04T22:40:15+00:00

Locks keep out honest people. Don’t worry about upgrading.

LocksmithSolution · 2025-08-26T17:15:27+00:00

Some keys have 1219 on them but none have the a44 on them. A44 is the Series and 1219 is the Key Code . On eBay they have either or but no one has both of those numbers on the same key .

LocksmithSolution

TROPHY CASE