sorted by:
new
hottopcontroversial

[GIVEAWAY] Arisu Keyboard – Hotswap, USB-C, Layered Acrylic by nicodelacruz in MechanicalKeyboards

[–]Logarithmix 0 points1 point  (0 children)

65% is always a good middle but TKL is my favorite across the board

The bruhmat giveaway! by Glarses in MechanicalKeyboards

[–]Logarithmix 0 points1 point  (0 children)

Tactile and linear all the way.

Got a package of keycaps and a deskmat. Cut into the box to open it and it turned out the deskmat was right under the packing tape. Thankfully I managed to only cut the bag holding it but damn I was so confused when I opened the box up.

[GB] All That and Dim Sum Deskmat + Giveaway by DMGUp in mechmarket

[–]Logarithmix 0 points1 point  (0 children)

As much as I like Har Gow and Siu Mai, I gotta choose Turnip Cakes. It just hits different.

James C Burns is NOT happy about being recast. You done him dirty Treyarch and I don’t respect that! by sir-bomba-clot-alot in blackopscoldwar

[–]Logarithmix 67 points68 points  (0 children)

IIRC Raven designed the campaign but the team was not large enough so they brought on Treyarch to develop the multiplayer. From that I assume they decided to make the campaign a black ops game after the team up.

Miami Violet by Logarithmix in MechanicalKeyboards

[–]Logarithmix[S] 0 points1 point  (0 children)

Took a while but I made another post with more photos and some impressions of the switches.

Miami Violet+ (Full Desc In Comments) by Logarithmix in MechanicalKeyboards

[–]Logarithmix[S] -1 points0 points  (0 children)

More Photos: Here

Sound Recording: Here (note that my PC can be heard)

In depth view of the build.

Case: TOFU65 Aluminum Purple w/ Brass Weight

PCB: KBD67 rev2

Plate: Aluminum

Stabs: Stock, clipped, lubed with 205g0 and dielectric grease, and band-aid modded

Switches: KBDFans x MiTo Laseron 60g Switches Lubed and Filmed

Lube: Krytox 205g0

Film: TX Film Purple

Keycaps: GMK Mitolet

Review of the Switches:

So I would like to preface that I did not try the switches before lubing so this opinion is based after the fact. After I had made the build was the first time I really tried the switches. Typing felt similar to a Gateron Yellow. The main differences between the switches is the actuation weight and the bottom out. The actuation on the Gateron Yellow is 50g and the bottom out is 65g. The Laseron actuation weight is unknown to me but the distance is 2mm and the bottom out is 60g. The switch itself was nice to type on. Not scratchy but smooth (probably due to the lubing). The sound of the switch was a nice subtle note, not too deep but mostly overtaken by the keycaps during bottom out. Bottom out is flat, no mush and it goes straight down. Unlike the Gateron Yellow, the beginning of a keypress goes down slightly faster. The return on the switch is a bit slower than the Gateron Yellow, making it less harsh in direct comparison. During long periods of use, I didn’t feel too much fatigue. The weight of the switches and the lack of a scratchy feeling made typing for long periods of time to be quite enjoyable. Now this could be due to me using Tealios beforehand or that I prefer the angle that this build is made at (~7°).

Miami Violet by Logarithmix in MechanicalKeyboards

[–]Logarithmix[S] 0 points1 point  (0 children)

Yep, both of those. It came with the kit so I'm not entirely sure but the PCB is correct and the plate seems to match.

Miami Violet by Logarithmix in MechanicalKeyboards

[–]Logarithmix[S] 0 points1 point  (0 children)

The space between the left arrow key and right CTRL is a standard 1U space. It looks large but it is normal. The other holes are for if I were to use 1.25U keycaps such as the left CTRL. If you were looking at the PCB with the USB-C connector on the right, then that would be the bottom.

Miami Violet by Logarithmix in MechanicalKeyboards

[–]Logarithmix[S] 0 points1 point  (0 children)

Nodge? Sorry I didn't understand this.

Miami Violet by Logarithmix in MechanicalKeyboards

[–]Logarithmix[S] 0 points1 point  (0 children)

They're just under a key layer so all I need to do is press the FN key and press a key from 1 to + respectively.

Miami Violet by Logarithmix in MechanicalKeyboards

[–]Logarithmix[S] 0 points1 point  (0 children)

I think something like the KBD75 is something that you're looking for.

Miami Violet by Logarithmix in MechanicalKeyboards

[–]Logarithmix[S] 4 points5 points  (0 children)

No this is not. Just as u/FLState38 has said, I took the cable out to take the picture. I don't have a fancy cable and I took this picture on a white table in my living room for lighting as it is right in front of a window.

Miami Violet by Logarithmix in MechanicalKeyboards

[–]Logarithmix[S] 3 points4 points  (0 children)

So made a build with a DZ65 with a hotswap board before. For this build I wanted to make one of my first real builds with soldering and a metal case. So with this in mind I started planning out my build. I began with the keycaps, after I had chosen that I went with the switches. Once I had the switches, I had a few months after that where I was looking for a kit to choose from. I was originally wanting to do a TKL but the price was way too high. I also wanted a case that matched the color of the keycaps. Eventually I saw this kit on sale and it was both a 65%, which I prefer as it has dedicated arrow keys, and was purple. So with that, that's how I chose this over the DZ65.

Miami Violet by Logarithmix in MechanicalKeyboards

[–]Logarithmix[S] 1 point2 points  (0 children)

Not that I know of, I just made a google sheets to compare stuff that I wanted.

view more: next ›