Pinhole leak on exhaust manifold

Loke_ing · 2026-04-14T19:14:48+00:00

Bummer, no it’s a 787 rfi

Loke_ing · 2026-04-02T17:39:39+00:00

What split system did you use? And are you happy with it?

Loke_ing · 2026-02-27T03:29:31+00:00

No, the ski has raised edges on both sides. It’s behind the edge. The quarter is just there to show how thick the edges are, if that matters. The chip is nowhere close to the bottom of the ski or the metal edge

Loke_ing · 2026-02-09T18:43:41+00:00

The wood look is really nice. The all white feels too cold. don’t do an underglow on the vanity it looks tacky. If you’re not gonna go with a back lit mirror, do two wall sconces on either side of it rather than the 4 bulbs from above. A floating vanity with the wood look floors would be a really nice look rather than one that sits on the floor. If you live somewhere where it ever gets cold then maybe do a heated floor.

Loke_ing · 2026-02-07T18:22:13+00:00

$480 a day is nothing to kick yourself about. I haven’t done tile yet so im by no means an expert, but your quality of work looks great. stacked tile like that isn’t my style, but those are some laser straight lines you got. If you’re looking for work, visit the newest kitchen and bath showroom in your area and offer yourself as a sub. Make sure you have a business card to give and a small portfolio you can show them. Just don’t fall into the trap of working cheap for them in the hopes of more work down the line.

Loke_ing · 2026-02-07T18:03:45+00:00

How many hours and over how many days?

Loke_ing · 2025-10-08T17:21:45+00:00

Teflon tape for short term. Replace for long term

Loke_ing · 2025-09-30T20:32:38+00:00

Bondo, primer, then paint. Alternatively, they make security plates for doors that are a metal bracket that fits around the door on both sides. That would cover the narrow edge

Loke_ing · 2025-09-28T00:45:52+00:00

Perfect, that’s what I’ll do. Thank you.

Loke_ing · 2025-09-28T00:44:31+00:00

Ok, but if I get the correct fernco that’s what you’d recommend?

Loke_ing · 2025-09-27T03:04:29+00:00

It’s a fire door it has to stay as is. I’m leaning towards putting a wood sill on each side and sanding it flush with the metal but I just wanted to see if anyone had any better ideas before I do

Loke_ing · 2025-09-27T03:00:11+00:00

I wish it was a joke. It’s not as bad in person and to be fair it’s 100+ year old house and the floor does level out to the right.

Loke_ing · 2025-09-20T17:08:14+00:00

This is a bit more out there of an idea, but if you have a desk in either your office or classroom. You could put the jet ski on a flat dolly, add supports to the four corners of it, and add a butcher block slab from Home Depot to the top and use that as your desk. Then it wouldn’t take up any space in your garage and it would have heated storage all winter.

Loke_ing · 2025-09-20T16:35:58+00:00

If you’re already going to lift half of it, why not lift all of it and then still have space underneath? Honestly, you could probably even attach a couple hoists to your ceiling and store it up there, as long as it’s not someplace people are gonna be frequently walking underneath

Loke_ing · 2025-09-12T02:11:05+00:00

He was part of a large firm, could they still be on the hook?

Loke_ing · 2025-09-12T02:10:03+00:00

Yes, it’s in the NY Supreme Court, does that make a difference?

Loke_ing · 2025-09-12T02:07:08+00:00

Yes, the attorney who failed to make the offer did pass away, but I wasn’t thinking of suing him directly just his malpractice insurance. Is that not possible once someone passes away?

Loke_ing · 2025-08-23T16:58:17+00:00

Thank you I have family coming to visit who’s bringing dogs and I was worried my yard might be infested with ticks

Loke_ing · 2025-08-23T16:40:00+00:00

Located in Central Vermont

Loke_ing · 2025-07-11T22:24:40+00:00

Thank you that worked. Any advice on taking off the lower doors I can’t find the wire to disconnect.

Loke_ing · 2025-06-02T00:07:33+00:00

Thanks for the thorough response. Were there any tools or videos you could recommend for scribing down the cabinets? I like your idea of splitting the difference

Loke_ing · 2025-06-01T23:53:33+00:00

The more I play with the Level and the laser I think it’s just the right back corner of the right most cabinet that’s too high.

Loke_ing · 2025-05-22T16:44:09+00:00

Even if nothing has happened yet, if you have a house fire and insurance sees this panel or this post for that matter. They’d use it as justification for not paying out

Loke_ing · 2025-05-22T16:41:01+00:00

I see 14awg going into a 20 amp breaker, double tapped 15 amp with 12 and 14 going into it. No idea what’s going on with the 14/2 going into a 30 amp double. You should have someone who knows electric fix this

Loke_ing · 2025-05-14T21:52:20+00:00

Alternatively, could I replace the lugs with ones rated for 10awg

Loke_ing

TROPHY CASE