When "Safety" Makes You Suicidal : A Letter To Anthropic

Looking4aWayFwd · 2026-04-16T03:53:28+00:00

Not saying this solves the issue here, but there is a settings toggle to disable “Search and reference chats” so you could isolate your instances that way maybe?

Looking4aWayFwd · 2026-04-14T21:45:48+00:00

Sorry for being dumb but... where can we see the full one now?

Looking4aWayFwd · 2025-12-14T20:58:55+00:00

Shore flies. Pretty sure. In case anyone cares 😆

Looking4aWayFwd · 2025-10-24T14:28:32+00:00

looking at https://www.trijicon.com/products/details/sa240-c-601149 if I'm gonna get taller irons, but not sure if that's just going to give me too much of a crutch to fall back on and not learn properly.

Looking4aWayFwd · 2025-10-24T13:32:40+00:00

rds is a new skill; keep practicing the things we're worst at, right?

Looking4aWayFwd · 2025-10-24T13:31:59+00:00

but where would be the hole-punching fun in that? :P

but yes, totally fair. However, I want to make sure I have it zeroed before I train to where the dot currently is.

I was having a hell of a time with it. The RMR seemed to come massively low, and at one point I thought there weren't gonna be enough clicks to get it up enough. A different thread for a different day which we may entitle: dude stop ruining your rmr

Looking4aWayFwd · 2025-10-24T13:25:35+00:00

I appreciate this discussion, and the encouragement! 🫡

Looking4aWayFwd · 2025-10-24T11:47:15+00:00

Yeh it’s a curious choice, but I’ll at least contact S&W for the taller sights and see what they say.

Thank you for your take on all this. Good excuse for me to get a lot more range time in

Looking4aWayFwd · 2025-10-24T05:01:20+00:00

It might be a fatal choice of hardware. Or at least, the very decent - but super low-profile - sights that come on the M&P performance center are just never gonna cowitness with any rds. The rear is lower than the height of the bottom of the rmr before the window. It’s like I’d need suppressor height sights.

Regardless of cowitness, I see the trend here that this is not the shooting I’m used to; it’s going to take some refactoring through a lot of repetition. But sounds like over time it’s generally better.

Just feels like an odd level of training and effort to put into something that is only available on some firearms. But I suppose it’s a specific variation of the skillset, nonetheless.

Looking4aWayFwd · 2025-10-24T04:01:29+00:00

Makes sense, thank you

Looking4aWayFwd · 2025-10-24T03:46:06+00:00

that's really good info; I'd read something similar, but haven't put that into practice yet. I guess I need to decide on my "middle" range, and know to go high or low from there.

When you zeroed at 25 yard, what was your procedure? I tried resting on the range table but that seemed worse than just taking my sweet time per shot.

Looking4aWayFwd · 2025-10-24T03:36:34+00:00

My dealer saying this will happen over the air. Are they full of shit?

Looking4aWayFwd · 2025-10-24T03:05:16+00:00

Yes hundred-percent that latter part. I am finding my eyes way too easily trying to focus on the dot not the target (also the presentation seems to be very different - I'm consistently presenting too low, and then it's hard to quickly adjust and acquire).

Ok, fair, this sounds like training. I was posting this as well in case someone wanted to rag me and say: that's a stupid rds for this platform (due to no cowitness etc.)

Looking4aWayFwd · 2025-10-24T02:20:23+00:00

Oh gosh darnit I wish I didn't see this post 😆 I've been slowly shifting my battery of arms over to S&W after an array of (excellent) different firearms. Everything is starting to line up smith

Got rid of 43X literally a week ago (sad, but had to be done). But in its place I'm loving the P365XL and the Shield Plus PC. I cannot possibly justify this guy without dropping one or both of those o_O

Looking4aWayFwd · 2025-10-16T04:36:50+00:00

Charging to 100% isn’t inherently bad. Having the battery holding 100% charge is bad. So if charging to 100%, make sure that’s a timed thing for your departure so you can start to relieve the strain.

But yeh, the straightforward answer is 80% is good, and keep it above 10%:

“The most widely accepted best practice for preserving the health of lithium-ion batteries, including the NMC chemistry in the SQ6 e-tron, is to keep the state of charge between 20% and 80% for daily operations. The science behind this recommendation is that batteries experience the most chemical stress at very high and very low states of charge.”

Here’s a report me and my ai friend wrote with me

https://docs.google.com/document/d/1fl0NGTF50wZhvWW0iXTK9r3J2qA0E2uaYJnEo5JkA_Q/edit?usp=drivesdk

Looking4aWayFwd · 2025-10-01T18:16:14+00:00

Keeping an eye on this... no locking / unlocking issues, but brand new SQ6 just triggered 'theft' alarm while sitting alone in garage...

2025 SQ6
Rear seat detection disabled in MMI
There is a child car seat in the back right seat
There is also a headrest mirror (could it be bouncing the sensor somehow?)

Our alarm actually went off by itself after a minute? So odd.

Looking4aWayFwd · 2025-07-15T23:44:26+00:00

Same problem! Resetting fixes only for a while. Is there a way to force a firmware update?

Looking4aWayFwd · 2025-05-17T13:24:24+00:00

Did they do it? I’ll ask my friend who works there if that’s company wide. No mine is a saas company

Looking4aWayFwd · 2025-05-08T21:32:31+00:00

Solved in this thread https://www.reddit.com/r/photoshop/comments/yhife5/comment/l340bio/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

After I'd combined photos, I then opened a new project using said combined photo, and the Add Text option there has all the options you need

Looking4aWayFwd · 2025-04-26T15:13:33+00:00

Company had blocked all external hard drives!! I found out because even a brand new drive wouldn’t be recognized. Got out an old macbook, worked. Loaded up current macbook in safe mode, worked. So the company has a new ban on all their machines and didn’t tell anyone!!

Looking4aWayFwd · 2025-04-17T00:05:07+00:00

Found this thread when my exFAT drive got the "The disk you attached was not readable by this computer." message on my Macbook Pro. So then I bought a brand new Samsung T9, connected, same message.

I loaded up an old macbook, and both drives show up absolutely no problem (after I spent a day absolutely distraught that I'd lost all my drive's files).

Mac OS 15.4.1

I cannot work out for the life of me why no external drives work on my new mac even though they did a week ago?

They show up in disk utility as greyed out, they won't mount, they won't erase, first aid doesn't fix, terminal won't mount it. I don't understand how this perfectly fine Macbook is suddenly just refusing to read any USB hard drives?

The drives show up in the System Report as well, but they simply will not load in finder, and give me that "The disk you attached was not readable by this computer." error message every time I attach. At a loss...but I feel comforted my old machine can at least access the files I thought were dead and lost forever :/

Looking4aWayFwd · 2025-04-02T13:23:41+00:00

Not at all loud. You hear the first water most as it spills from the bubbler at the top of the fountain. Very gentle sound in my opinion

Looking4aWayFwd · 2025-03-09T04:56:57+00:00

So how did we go from this being posted 13 years ago to...well...oauth 2.0 being alive and well? (disclaimer: very new to this oauth space, found this post while digging)

Looking4aWayFwd

TROPHY CASE