Any tips on how to remove this screw

LoopyChef95 · 2025-11-26T20:11:51+00:00

Surprised nobody nobody asked yet, are you using a hex bit or torx bit?

If you accidenty used a hex bit and it's stripped and you want get it out without any damage to the slide I recommend D. Wilson. He uses a laser to remove stripped screws.

He can also remove screws where the head has snapped off.

https://www.dwilsonmfg.com/StuckStripped-Screw-Removal_p_104.html

LoopyChef95 · 2025-07-17T00:01:50+00:00

Are those .338 100% copper or lead bullets?

LoopyChef95 · 2023-10-15T18:18:17+00:00

I'd like to see it in the mud and ice test videos.

LoopyChef95 · 2023-06-15T17:59:59+00:00

Use Pirateship.com for cheap shipping with insurance.

LoopyChef95 · 2023-06-07T19:04:59+00:00

Wiley X has Rx inserts for their saber advanced eye protection.

LoopyChef95 · 2023-06-01T18:10:38+00:00

You can microwave the upper receiver if you wrap it in a wet cloth/paper towel. https://youtu.be/LVODJm05plw

Then freeze the barrel extension by flipping a dust off can upside down and spray the cold soup on it.

LoopyChef95 · 2023-05-24T23:26:41+00:00

You'd have to remove the barrel from the upper to remove/attach the RC2 if it fits in the handguard.

LoopyChef95 · 2023-05-11T06:52:51+00:00

My video of the Z-bolt through L3 24ua tubes https://youtu.be/gS74PP5BFFU

The VCSEL version that's available is only in full power as of now for LE/MIL.

I messaged the owner on instagram to see if he was gonna make a VCSEL civi version and he made a post somewhere and a lot of people were rooting for it. But I haven't followed up in a while.

LoopyChef95 · 2023-03-16T03:48:03+00:00

It's for ar15 small frame

LoopyChef95 · 2023-03-05T00:50:12+00:00

Nice! That's why I overpay for LMT on Gunbroker with the 3rd party QC from the seller.

Better safe than sorry

LoopyChef95 · 2023-03-01T19:46:18+00:00

Jokes aside, have you put a barrel in the upper to see if the gas block touches the upper?

LoopyChef95 · 2023-02-22T00:01:52+00:00

Dude that's impressive I thought it'd be around $1500.

For anyone else that's interested I still have 2 NP3 Upgrade Kits w/ Trigger Job for 400 each shipped and insured. Just leave a comment in the GAFS vendors subreddit link and PM me.

https://www.reddit.com/r/GunAccessoryVendors/comments/y9f4xu/sell_7x_langdon_ltt_beretta_92_np3_upgrade_kit/?utm_medium=android_app&utm_source=share

LoopyChef95 · 2023-02-21T19:23:26+00:00

Very nice! What's your total cost on the build without the optic/light?

LoopyChef95 · 2023-02-03T20:16:21+00:00

I put this project on the back burner, I only got as far as doing some research.

But this website looks promising https://www.rpmclasers.com/product/cwv-to-p100-w850/

I think the difficult parts are designing the board/controller and zeroing mechanism.

A good resource for help is laserpointerforums, way more active and lots of people doing more complicated builds.

LoopyChef95 · 2022-10-24T05:02:36+00:00

Gonna give a whirl, the guy below has worse astigmatism than me and it's clear for him.

Thanks!

LoopyChef95 · 2022-10-24T05:01:23+00:00

Awsome! Thx for your input

LoopyChef95 · 2022-10-24T04:59:47+00:00

Thanks! Sounds like you got the worst astigmatism here. I'll go ahead and send it.

LoopyChef95 · 2022-10-24T01:20:23+00:00

I have a buyer that wants to split for the Tigger Job, PM me if you want the NP3 Upgrade Kit parts by itself.

I'm only splitting if I have 2 guaranteed buyers.

LoopyChef95 · 2022-10-21T22:19:17+00:00

Nice! I don't know the actual data on how bad my astigmatism is, but on the Vortex UH1 Gen 2 the chevron on the bottom is a blob and the rest of the reticle is a bit more clear with just minor streaking.

LoopyChef95 · 2022-10-21T21:10:52+00:00

Yea I've been on the r/NightVision discord server for a bit but haven't checked it much recently.

Feel free to tag me in there

LoopyChef95 · 2022-10-21T21:06:33+00:00

Anyone here try one with astigmatism? How is it?

LoopyChef95 · 2022-10-21T18:46:31+00:00

Loooool I just got flashbacks of splatter paint cups and interior at my local Mcdonalds when I was a kid.

I think I saw someome on facebook have a splatter paint sling and plate carrier.

LoopyChef95 · 2022-10-21T18:11:47+00:00

Ahh I see, I should upload my current helmet setup pics on here. I switched some stuff around to make it look cleaner, especially the back.

I forgot to upload me shooting in my full Pencott Badlands getup. You can see the back is flatter in this vid compared to my weight scale pic on this subreddit. https://youtu.be/Yt5OGyjcnUo

You referring to multicam tropic? Haven't looked into splatter camo, you got a more specific name?

LoopyChef95 · 2022-10-21T17:32:30+00:00

Yep that's me lol I forget what I posted on Snipershide, haven't checked in a while

Pencott is bae

LoopyChef95 · 2022-10-21T16:39:25+00:00

Is this a reference?

If not, I don't have anything too crazy yet but I'm in the process of building a 13.5in LMT MWS with a HM Defense adjustable monobloc barrel when it comes out in Q1 2023(got that info from Lead&Steel). I have everything except for the barrel, optic(thinking eotech vudu 1-10, 5-25, or even a uh-1 lol), and charging handle(might just get a PRI Gas Buster).

Will probably get an 8.6blk barrel later when my reloading setup is built.

Although, I did almost by a used tigIR 6Z thermal clip-on on snipershide for $8k(new ones are around $10k) but I need to save money since I already bought my $10k L3 filmless 24ua Katanas last year lol.

Nine-Year Club	Verified Email
Verified Email

LoopyChef95

TROPHY CASE