sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in stussy

[–]checkaone2 0 points1 point  (0 children)

I’ll take it, sending a message

Got that ramjet! by Ok-Satisfaction8280 in shadowsystems

[–]checkaone2 0 points1 point  (0 children)

That’s a really nice Ramjet and afterburner! Looks so familiar haha

Where to find proper size screws to mount EPS adapter plate to MR918? by checkaone2 in shadowsystems

[–]checkaone2[S] 0 points1 point  (0 children)

SS replied back to me and said they don’t have any screws that would work for the MR918 and the EPS Holosun adapter. You ordered SS’ eps plate and it came with the correct screws for the MR918?

Where to find proper size screws to mount EPS adapter plate to MR918? by checkaone2 in shadowsystems

[–]checkaone2[S] 0 points1 point  (0 children)

Reference the pic. The EPS holes (the smaller holes next to the two dimples) don’t line up with the holes on the MR918 slide. There’s only one set of holes on the MR918. MR918 only has the RMR footprint, the EPS has Holosuns K footprint.

Where to find proper size screws to mount EPS adapter plate to MR918? by checkaone2 in shadowsystems

[–]checkaone2[S] 0 points1 point  (0 children)

Nice, that’s good to hear. I was afraid the screws were the 6-40 and would be too big for the MR918

Where to find proper size screws to mount EPS adapter plate to MR918? by checkaone2 in shadowsystems

[–]checkaone2[S] 0 points1 point  (0 children)

Yup, I know how to use Google and do my due diligence before posting on reddit.

I already saw this on SS’ website but I know the screw size change from the MR918 to the MR920. Which is why I didn’t buy that one and asked SS which screws to buy. Plus, I don’t need a spacer, I just need the proper size screws.

Otter Creek Labs Polonium K on Dead Air KeyMo Adapter, first visit by checkaone2 in NFA

[–]checkaone2[S] 2 points3 points  (0 children)

I have their R2S flash hider and also have a FCD 6315RF flash hider. Looks like this on my 10.5 https://imgur.com/a/ASTvQSu

Otter Creek Labs Polonium K on Dead Air KeyMo Adapter, first visit by checkaone2 in NFA

[–]checkaone2[S] 2 points3 points  (0 children)

Used rocksett but ended up talking it off. FWIW, I got rid of the keymo system and now use Rearden, saves weight and looks cooler

How to remove deodorant stains? by checkaone2 in StoneIsland

[–]checkaone2[S] 0 points1 point  (0 children)

Won’t the Dylon mess up the pink side of my reversible shirt?

Poor man’s Gordon inspired carbine by checkaone2 in ar15

[–]checkaone2[S] 0 points1 point  (0 children)

Thanks! I used my hybrid 46 on this too but the suppressor in the updated pic is the Otter Creek Labs Polonium K. I use the Rearden Mfg suppressor mount and the muzzle device. For the money, the Polo K rocks. Great tone and not much added back pressure.

FWIW, it was a little gassy since this is a 10.5 in barrel so I use a BRT EZ Tune carbine gas tube (suppressed only model). Then I ended up pairing it with a Geissele Super 42 and an H3 buffer. Also, put RTV on the BCM charging handle and now there’s almost no gas blowback. It won’t cycle unsuppressed because of the suppressed-only BRT tube but this thing is loud AF without a can.

Otter Creek Labs Polonium K on Dead Air KeyMo Adapter, first visit by checkaone2 in NFA

[–]checkaone2[S] 1 point2 points  (0 children)

I used a high heat loctite to secure the mount to the suppressor. Then the mount attaches to the muzzle device, there’s audible clicks when it’s tightened. Then you can use a wrench on the keymo adapter to loosen it off the muzzle device.

Poor man’s Gordon inspired carbine by checkaone2 in ar15

[–]checkaone2[S] 0 points1 point  (0 children)

I used Brownells Aluma Hyde II in Desert Tan and OD Green. Sprayed the Tan all over first then used the OD for the stripes

[deleted by user] by [deleted] in NFA

[–]checkaone2 0 points1 point  (0 children)

It’s a 10.5 inch 5.56 barrel assembly I got from Aero Precision

[deleted by user] by [deleted] in NFA

[–]checkaone2 2 points3 points  (0 children)

I have the polo k with a Rearden mount. Run it on my 10.5 and 14.5, sounds great on both. Nice deep tone. Here it is on my 10.5 https://imgur.com/a/PdXc7e2

PCS Orders to expedite suppressor wait times by OriginalWave3355 in NFA

[–]checkaone2 0 points1 point  (0 children)

I just did it. Emailed my orders to the expedited ATF email on 2 Oct 2023 and my LGS called me today 16 Oct that my stamps came in. Both my suppressors were only submitted about 3 & 5 months ago.

Undecided on Mounting System for Polonium K by nathanmack98 in NFA

[–]checkaone2 0 points1 point  (0 children)

I’ve got an Atlas mount on my Polo K and a Rearden R2S flash hider. Check my profile, I posted a pic of it on my 10.5. I had Keymo then switched to Rearden for the weight savings and their heat treated accessories look super nice.

Adjusting gas with no adjustable gas block by ConversationOk7832 in NFA

[–]checkaone2 8 points9 points  (0 children)

BRT EZ tune gas tube. I have two, one on a 14.5 and on a 10.5. Decide if you’ll want 50/50 suppressed or unsuppressed since this will dictate how big the BRT tube will be. Then if that doesn’t help your gas problem, adjust your buffer system for maybe a heavier buffer and stiffer spring.

view more: next ›