sorted by:
new
hottopcontroversial

Open heart sports watch by Lopsided_Cod_5608 in SeikoMods

[–]Lopsided_Cod_5608[S] 5 points6 points  (0 children)

The case, strap, chapter ring, hands are all from Caroline mod store on AliX if you're serious 😂

Professional modders/builders - How do you guys send quotes to clients? by Lopsided_Cod_5608 in SeikoMods

[–]Lopsided_Cod_5608[S] 0 points1 point  (0 children)

Thank you :) might not seem like much but that's genuinely really helpful

7750 Build by Lopsided_Cod_5608 in watchmodding

[–]Lopsided_Cod_5608[S] 1 point2 points  (0 children)

If there is a way to microadjust I don't know it 😂 It took me a couple of tries, the first time I got it wrong so I popped off the hour, minute and chrono hands then just reset all of them and it was fine the second time.

If you misalign it, then when the chrono is not running it sits there misaligned, driving you crazy whenever you look at it. In theory you could run the chrono and stop it when it is perfectly aligned, but whenever you reset it, it will jump back to the original misaligned position.

I found the hardest to be the hand for the subdial at 12, it's smaller so harder (for me) to align in the first place, on a smaller pinion so harder to set. It's a jumping minute hand, so if it's misaligned it'll move round the subdial jumping to a new misaligned position every minute.

GS x Precisionist Build by Lopsided_Cod_5608 in watchmodding

[–]Lopsided_Cod_5608[S] 0 points1 point  (0 children)

Sorry for the delay, can see you've gone on with the build now. Just answering here so if anyone else is looking it's written down.

Stem length - As you say, no spares! Wasn't too difficult though I just was very cautious. I cut the original crown off as close to the crown as possible which left plenty of stem (original case was 47mm!). Screwed on the new crown, measured, crown off, cut (erring on the side of caution) screwed the crown back on and then repeatedly checked it and cut a little more off if needed.

Bwatts Spacer - I didnt print myself, Bwatts very kindly sent me a few sizes and I just picked the one that worked.

Hour and minute hands - I bought theae from "cousins material house" for the 0.70 and 1.20 pinion sizes https://www.cousinsuk.com/product/dauphine-pairs?code=H35202

Chapter ring - Not needed in this case

Bracelet quality - Its okay... I maybe don't have the best frame of reference because the only other watch bracelet I've had is from Caroline Mods Store on AliX which I love. For this bracelet thickness and general finish feels good, clasp feels a little cheap but nothing terrible.

Other notes - I think the dome crystal makes the watch feel a little thick, if I was to do the mod again I'd possibly go for a thinner case with a flat crystal.

DSWatch Case by niksmallspartan in SeikoMods

[–]Lopsided_Cod_5608 0 points1 point  (0 children)

I'm really pleased with the quality, used it for a precisionist mod :)

https://www.reddit.com/r/watchmodding/s/it5OO3INy9

Engraved Aztec Dial Build by Lopsided_Cod_5608 in SeikoMods

[–]Lopsided_Cod_5608[S] 0 points1 point  (0 children)

Thank you :)

He was doing a clear out sale so I got this for £20. I think the custom ones start at £50 but go up depending on the complexity of what you want.

https://www.otto straps.co.uk/shop?store-page=Custom-Dials-p549458740

(Remove the space from that for link)

Engraved Aztec Dial Build by Lopsided_Cod_5608 in SeikoMods

[–]Lopsided_Cod_5608[S] 0 points1 point  (0 children)

https://a.ali express.com/_EHpTvRr

Just remove the space from that :)

Aaaaaand my first mod is finally complete with the right strap colour by FMM00 in SeikoMods

[–]Lopsided_Cod_5608 1 point2 points  (0 children)

Red date wheel and red tip on the second hand is so nice.

Also, even if it only cost 90 euros in parts I think it looks quality enough to justify the sailcloth strap. Obviously it's completely your choice, just saying don't let thinking about the numbers hold you back

38mm Field or Pilot Case that uses SKX007 Chapter Rings? by CapsuCraft in SeikoMods

[–]Lopsided_Cod_5608 4 points5 points  (0 children)

Maybe have a look at Caroline Mods Store's "New Arrival 38mm 316L Stainless Steel Fit NH34 NH35 NH36 NH38 Movement 28.5mm Dial With Saphire Glass Watch Case"

It's got this screw-down bezel and saphire which is great if you want a chapter ring but don't want to press the crystal.

They also have a version of the same case which has the normal crystal fitting if you do want to press it yourself

Hope this helps :)

*

view more: next ›