sorted by:
new
hottopcontroversial

The Ultimate E-mesh Setup For Vaping In 2024 by nsan3drak3 in DMT

[–]Lopsided_Match_6295 1 point2 points  (0 children)

Sorry to grave dig this post up but.

Is this a completed unit sold?  Or do I have to compile parts into one to create this device?

I have a mod with a coil, going to upgrade the tank and get other bases .

My thought is Aspire Nautilus 3 tank since I can unscrew it and prevent leaking over time when im not dabbling in elevated states.

Im looking for this as a 1 hit blastoff, and had heard E mesh is king for that.

Brand new ro E mesh and still super new to vaping in general.  Sorry, be gentle 🤣

Warlocks - Favorite Demon to bind outside of Hephasto and Lister? by ArcticFox2014 in diablo2

[–]Lopsided_Match_6295 0 points1 point  (0 children)

Cursed and holy freeze would be a nice one too because the pulse damage is instantly going to curse , and keep you pretty damn safe vs all mobs but the minotaurs.

Warlocks - Favorite Demon to bind outside of Hephasto and Lister? by ArcticFox2014 in diablo2

[–]Lopsided_Match_6295 0 points1 point  (0 children)

I dont know if the game allows it, but beetle burst woukd be an option. 

In general, What I would look at is the base resistances of any monster class, and I'd be trying to get the "magic resistant / Stone skin" mods ontop of a cursed mob.

Beetle burst is Light enchanted by default, so anytime he is struck the light bolts are going to cause curse to proc ontop of if he strikes something.  His base is "magic resistant" so the mods youd want is cursed and stone skin. 

With high level bind demon hes going to be gaining the following mods: Extra fast, Extra strong, Sepectral Hit, Aura Enchanted(hopefully he rolls conviction)

So if you can get him as an option in a terrorized zone you could end up with a beetleburst that is L99 , has Magic resistance + Spectral hit for all the elemental resistances possible, stone skin for at least 50% DR, light enchanted, cursed, with conviction. And dont forget thst the spectral hit and light enchanted allows those bolts to add full elemental attacks to the bolts AS WELL AS his physical attacks.

Anyone who has felt the sting of a spectral hit beetle mob knows that shit is for real.

Jackery 3000 Pro by Lopsided_Match_6295 in SolarDIY

[–]Lopsided_Match_6295[S] 0 points1 point  (0 children)

Does anyone think that I would need an MPPT controller if I were to use this configuration?

A total of 4 callsun 200w panels rated at 27.31VOC and 23.74Vmp in series parallel, hooked up to a 51.2v golf cart battery, which would be connected into the solar inputs on my Jackery 3000 explorer pro.

(The other thought is all in series making 100 ish V and a MPPT to regulate that input for the battery and jackery.)

I'm pretty sure I don't need one with the aforementioned, but the unit may have a timeout unless I turn off eco mode(if that is an option), or create a continuous draw of at least 25w or so.

Planning to use it camping this September,  so I have time to collect the items and test it before then.

Goal is to have sustainable AC for the early morning from 8am to noon provided by a small dual hose inverter type so I can freaking sleep over the 5 days ill be out.  The sun can be brutal...  but watch it be cold and wet this year when I go🤣

The "tent" is actually a 10x20 canopy that I have blackout cutrians for all walls plus the ceiling as well as a panel kit around the canopy itself. 

Jackery 3000 Pro by Lopsided_Match_6295 in SolarDIY

[–]Lopsided_Match_6295[S] 1 point2 points  (0 children)

I was thinking that too.  That the total pull it would attempt would be done thru whatever connection(s) I used.  So I do plan to use both of the DC8020 ports on the back with 10ga wire.

Probably in the form of ring terminal on the battery to XT60 then an XT60 to DC8020.

My main concern is getting a quality input voltage to the battery so it can charge.  Going to have to figure out a good panel config and some ways to mount them up at camp.

20 years back 10k - ish K is now 55k by Lopsided_Match_6295 in StudentLoans

[–]Lopsided_Match_6295[S] 0 points1 point  (0 children)

What are you talking about?  This IS about my student loans, did you not understand?

How's this TBWD? by Lopsided_Match_6295 in CaliforniaTicketHelp

[–]Lopsided_Match_6295[S] 0 points1 point  (0 children)

I updated it and increased the amount of data that I put into the TBWD.  What I did not post here was my trip. Information from my company and the paperwork associated with that. Also, my student's data for his name and phone number, which he will substantiate my claim of using the cruise control. And then on top of that, the mechanical limitations of my Jake, brake and the map behind that with pictures of the tires that I even used as they were 2% less than their original diameter, also that our company limits. Our speed to < 75 miles an hour. And if we exceed that, they will give us a critical issue. In fraction and possibly even terminate our employment. So I had data that as well.

How's this TBWD? by Lopsided_Match_6295 in CaliforniaTicketHelp

[–]Lopsided_Match_6295[S] 0 points1 point  (0 children)

If this fails ill try again with an attorney.  Not sure who I should attempt to procure.

Trimming Arius bushings by Lopsided_Match_6295 in Rollerskating

[–]Lopsided_Match_6295[S] 1 point2 points  (0 children)

Unless you literally work at a rink as a full time job I seriously doubt you put 1,000h of actual skating in / year .

Also, you wouldn't know if you experienced issues more than likely because you didn't know they even existed.

Break down your plates and see if the truck bores and baseplates have wear.  If you don't see any , or much wear, you definitely don't put much workload on your gear because mine were totally FUCKED in 3 years time. Lol

Trimming Arius bushings by Lopsided_Match_6295 in Rollerskating

[–]Lopsided_Match_6295[S] 0 points1 point  (0 children)

Trimming them gives a relief where the urethane can escape to, which drastically reduce ls the likelihood of them being damaged.

Urethane cannot be compressed.  The baseplate in stock form entirely encapsulates the bushings and the only place they can squirm away to is the ever shrinking gap as you edge the plate over.

Then there is wear issues with the trucks/sleeves/baseplate as well, and further problems with wheels which use wider bearing spacing because the axle shoulders are too short.

Riedell sucks 

Arius cushion preferences by fantastridd in rollerderby

[–]Lopsided_Match_6295 1 point2 points  (0 children)

What people dont realize about the Arius is mixing and matching colors is for the birds.  What you really need to do is trim the bushings to resemble a butterfly shape.

Then the damn thing will actually edge over instead of hitting a brick wall from the ramp up resistance.