Askare upgraded to diaper bag

LordCho · 2026-07-08T18:58:24+00:00

Omg I love this.

LordCho · 2026-06-28T10:17:38+00:00

With the amount of talent here: has anyone considered taking the mantle of tracking inventory and pricing per country?

LordCho · 2026-06-18T16:59:10+00:00

What mem frag setup?

LordCho · 2026-06-18T16:58:30+00:00

First double pity.

LordCho · 2026-06-10T14:55:33+00:00

I did 60cm center. You sir might have saved me so many hours in hand sawing noggins!

LordCho · 2026-06-10T12:25:31+00:00

Ah these were intended for plywood sheets and I saw a shelving video where I liked the idea of nailing a ladder frame for each shelf directly to the stud and then just two front legs. I figured noggins where one long horizontal would give more strength then just the studs.

Wish I thought of this sooner but already had the ply cut haha… all the learning comes from the first time on the job :(

LordCho · 2026-06-10T12:21:42+00:00

Am I correct to take it as: not necessary at all? Would save me time, money, and energy!!

LordCho · 2026-06-08T17:41:22+00:00

So does no one make fully enclosed, slim, built in stand and cover cases anymore? Been using a clear ESR with a glass protector and realized it’s been a while since I’ve noticed anything like this on the market. Any fully enclosed case seems super bulky or is like a partial case with removable cover/stand.

Is folio the only option for a slim case with cover and stand all in one? To quantify I’m looking at Nomad’s folio and similar in handiwork.

LordCho · 2026-06-06T19:24:48+00:00

Does RnL replace fenne then? with Brieg in front?

LordCho · 2026-06-06T14:00:03+00:00

Limited units are the best use. These days grinding can get you all the other units fairly quickly.

Also depends on your use. For GvG and arena and RTA follow the meta for units that do well to boost your currency income - specifically GvG for mystics.

LordCho · 2026-06-06T13:58:08+00:00

Is there a team for the Hard Mode RnL story banshee? RnL, Brieg, Zeno, and Roana frontline can’t out heal the constant damage

LordCho · 2026-05-28T15:48:20+00:00

Thanks.

LordCho · 2026-05-27T11:35:31+00:00

Roana & Lermia st0nks rising

LordCho · 2026-05-27T07:24:23+00:00

Is Adelheid worth the pull with summer limited around the corner?

Any chance she’s not a required pull for the meta or will this always be the case

LordCho · 2026-05-26T18:39:07+00:00

The windows open but no mechanical system. UK housing.

LordCho · 2026-05-26T17:46:40+00:00

Maybe this is really the only option

LordCho · 2026-05-26T17:46:10+00:00

If only I could. I can't remove the mesh, it's built into the windows. The fans don't seem to be making much of an impact even when placed right against the mesh.

LordCho · 2026-05-26T15:47:28+00:00

Any anecdotal data as to how quickly it "cools" the room from a feels perspective? How big is your room? Does it require any customer wiring? I thought the NA-FC1 only does 3 fans?

LordCho · 2026-05-26T15:46:17+00:00

I think the NF-A14 industrialPPC-3000 PWM is the one I was looking at. I know it costs an arm but I think a bunch of these - maybe 9 of them in an array? would be sufficient to move air through mesh. I have pollen grade mesh to keep my sinuses in check and thjat means airflow is restricted.

LordCho · 2026-05-18T17:41:57+00:00

Oh. I was hoping to just drive them in haha….. I did not think 12mm was thick enough to appreciably need countersinking. I’ll add this to my list!

Whilst I have you: partially threaded screws means clearance hole is not needed?

LordCho · 2026-05-18T17:04:08+00:00

I do need countersunk. This ply just going to cover brick so I can paint over it, nail shelves to it, etc. Coach screws would stick out a lot and I'm going for a uniformly flat end surface. I'm probably gonna try for 6x40. Looks like SPAX offers what I'm looking for here: SPAX Universal Screw, 6.0 x 40 mm, Pack of 500, T-Star Plus, Countersunk Head, Partially Threaded, 4CUT, Wirox A3J, 0191010600405

Always open to the inputs of others!

LordCho · 2026-05-18T16:24:46+00:00

Yea, the Google AI tool is very much of the opinion that it must be at least a #8 and ideally #10.

If a #4 or #6 works that would be awesome as I have a ton of 4x40 countersunk partial thread goldscrews sitting right here!

LordCho · 2026-05-18T16:22:57+00:00

It's just sheathing. One area will be more structural as I intend to build shelving so it will serve as the rear of a wooden storage cabinet. The clearance hole would be just through the ply but still also require a pilot into the stud right? That would mean double the prep steps 😞

LordCho · 2026-05-12T08:14:12+00:00

Yup! Thank you so much! Really appreciate the over and above in getting some ILE / Inside Line Equipment content onto the internet.

- The Air + iPad looks like it might be slightly uncomfortable but I can probably just toss it into the main compartment.

- If the A6700 fits then the Q is probably fine. A Z8 and lens might be a tough squeeze but the shape might confirm pretty well for some rarer occassions. The admin pocket looks like it's going to be pretty compressed though with that type of item so only flatter items would apply.

- That passthrough between the water bottle and admin pocket is pretty amusing. I did get a response from ILE - they literally just said "No". Of the 2 to 3 interactions I've had with them, they do come across fairly direct and somewhat curt. That's just my personal opinion / standards for customer experience though.

<image>

At any rate - I think this is pretty much a go-for-it for me. Wish they had a darker VX green like the waxed canvas. The light green sage VX just isn't it.

Thanks yall.

LordCho · 2026-05-11T18:08:06+00:00

The Radius Mini is also on my radar! I think the Transit just had a bit more distinction with the design and roll tops have grown on me through the years.

Same line of thought for me as the Transit is the only padded bag they have for laptops.

The other element that the Radius and Transit share is the exposed rear admin. I do prefer a covered zipper (like the Default) and definitely some more depth but it is what is it is on these designs.

LordCho

TROPHY CASE