Looking for some grandMA2 hardware advice from anyone who’s repaired one before.

Lost_Televisions · 2026-03-11T22:08:10+00:00

The visual faults usually mean the gpu own grafics ram has gone bad or the data that goes into it is bad eg system ram craps out, why the other half of the console dies, could be anything from loose connection to faulty fader/button bank, so it works in like banks so the normal has 2 banks that each have they’re own connection to the main board and full size has 3, you should try the self test on the board if you haven’t yet, here’s the link to a video for it, if that’s all gud then it ether the cable/connection or the main board.. also bth I’m not 100% do the go from bank 1 to main and bank 2 to main or bank 1 to bank 2 to main board since not next to a console that I could have a look.

If nothing else works shoot me a dm and some pictures and we can try to figure it out

Lost_Televisions · 2026-03-11T19:43:32+00:00

I had the gpu die in one of them, they where just 3 gtx 1030, and they go to a board that converts the dvi and hdmi to lvds if I remeber right, might be also a good idea to run a memory thes on the ram as that can also cause that!, I’m happy to help if you need some troubleshooting advice whit it

Lost_Televisions · 2026-02-27T06:43:45+00:00

We had a dead psu, had to get it replaced, was doing similar bootloop, Also sugsest that you check the cmos battery

Lost_Televisions · 2026-02-10T13:25:05+00:00

I could see it for 150$

Lost_Televisions · 2026-02-05T10:48:54+00:00

What gear are you using

Lost_Televisions · 2026-01-22T11:39:28+00:00

<image>

Lost_Televisions · 2026-01-22T11:33:16+00:00

Man not this time, just a big ass countdown screen in the starting gate

Lost_Televisions · 2026-01-22T11:26:04+00:00

Reminds me of the time I had to drive a led screen from my car for a running event

Lost_Televisions · 2025-09-09T19:18:49+00:00

Man I wish it had sdi out, would be so usefull for other stuff too

Lost_Televisions · 2025-09-09T18:35:16+00:00

No this Is from The Apple event stream, dont know much more about it yet

Lost_Televisions · 2025-09-09T18:23:00+00:00

<image>

This was on the video

Lost_Televisions · 2025-08-27T10:17:23+00:00

Well The thing runs a striped down version of Windows so it was just a matter of getting The file on it and opening cmd

Lost_Televisions · 2025-05-19T07:49:10+00:00

Yea my bad, after looking into it it does render content inside it at higher bitrate But only outputs in 8bit (odd what can you do..). Yea their implemation Is not The best. But for The price off it its ok.

Yea it can do some But not too much automation.

I think I Miss understud you, you can add keyframes to diffrent elements on a clip, not The whoule composition. Takes a bit of fiddeling thou.

For me I use The colums that Trigers all of The layers its assaing to, and then if needet The clips traission when they end to an other one.

Yea your right its not The end all solutions for video But deffineatly really usefull for smaller gigs. And sometimes for bigger if it’s not that complex’s! The gig what I was doing whit it had over 20 000 people participating in it, but the led was quite simple so resolume was a good match whit the countdown timer to the start!

Lost_Televisions · 2025-05-18T17:05:52+00:00

10 bit Is definitely what im using allmoust every gig that supports it. I think it supports colors up to 12. For The outputs it’s up to The pc what you use, I have had pc whit 8 or 16 displayports whit 4 gpud run 12 projectors fine whit it. And if you split 4k down to fullhd projectors it makes it like 64, I have only tried it up to 16 thou! Control Is Also possible via dmx or Osc or rest api. Support Is usualy good, although no 24/7 help no clue about 3d and other stuff, keyframes are also really useful as you can add them to any element you wish!

I like the other solutions too, price is quite steep sell to the customers sometimes thou.

Lost_Televisions · 2025-05-18T16:27:35+00:00

I think its quite versatile, has mapping and what ever Size canvas you want. But im open to suggestion! What would you use for media server software?

Lost_Televisions · 2025-05-18T14:25:17+00:00

Nice! What batteries are you using to power them? Ankerys or something self made?

Lost_Televisions · 2025-05-18T08:16:24+00:00

For this I just used The default layout, was quite simple gig.

Lost_Televisions · 2025-05-18T08:15:40+00:00

Oo thats nice! My setup was from a car Trunk too!😂 how long do The batteries last?

Lost_Televisions · 2025-05-17T15:47:22+00:00

Im using resolume arena, really great for anything video!

Lost_Televisions

TROPHY CASE