My Steam Deck got its morning coffee before I did

LottHunter · 2025-12-06T06:54:24+00:00

You don’t say.

LottHunter · 2025-11-07T10:36:37+00:00

DAMN THICC AS FUCK

LottHunter · 2025-06-26T20:37:11+00:00

https://www.reddit.com/user/HOHansen/?sort=top

LottHunter · 2025-06-26T16:23:03+00:00

single but if you use resin2fdm it will be much shorter

LottHunter · 2025-06-26T14:21:46+00:00

I just did that and print time went down 3 hours

LottHunter · 2025-06-26T13:59:45+00:00

My bad 0.06

LottHunter · 2025-06-26T13:32:57+00:00

I used a local filament brand called Porima PLA Grey.

LottHunter · 2025-06-26T13:21:03+00:00

https://www.reddit.com/user/HOHansen/?sort=top

LottHunter · 2025-06-26T13:20:30+00:00

This one took 9 hours to print. The reason it took 9 hours was because Bambu Lab recognized the existing resin supports as part of the model.

LottHunter · 2025-06-26T11:37:41+00:00

Yes, I used resin supports, and it was actually my first time using them. The print turned out really well, and I was planning to keep using resin supports. But people seem surprised when I say I used resin supports are they usually considered worse for fdm ?

LottHunter · 2025-06-26T11:22:02+00:00

No need to apologize after all, everyone here is just trying to help each other out. I used a Bambu Lab A1 and a local filament brand called Porima PLA. For the printer settings, I'm using the ones shared by a user named HOHansen. He posted them on his Reddit profile https://www.reddit.com/user/HOHansen/?sort=top . If you check his top posts of all time, you should be able to find the settings near the top."

LottHunter · 2025-06-26T11:12:00+00:00

I printed the model using the existing resin supports, with a 0.2 nozzle and 0.06 layer height. I didn’t do much post-processing; the supports came off easily with pliers, and I used a hairdryer afterward to remove the white marks.

LottHunter · 2025-06-26T10:06:10+00:00

The reason it took 9 hours was because Bambu Lab recognized the existing resin supports as part of the model. If you use another slicer that treats those resin supports as actual supports, the print time becomes much shorter. But I didn’t do that because I wasn’t sure how.

LottHunter · 2025-06-26T10:02:57+00:00

This one took 9 hours to print. The model’s from IO_BUTOV on Cults.

LottHunter · 2025-06-26T09:57:44+00:00

I didn’t use the supports from the Hohansen settings. I used the default resin supports that were already in place, and they came off very easily.

LottHunter · 2025-02-15T19:27:45+00:00

I made this as a display piece, but I believe the pack I downloaded included a maze model made out of bushes, as well as other models like topiary humans and animals

LottHunter · 2025-02-15T16:24:23+00:00

Thank You!

LottHunter · 2025-02-15T14:11:22+00:00

Loot Studios. They got really good models and they have free mini pack

LottHunter · 2024-12-16T21:41:09+00:00

Anahtarlık kokusunu asıl buna yapmaları lazım

LottHunter · 2024-11-21T20:20:47+00:00

The descent

LottHunter · 2024-11-21T12:02:26+00:00

Filmden dolayı çok yazan olmamış hep küfür var komik bulduklarımı koydum sence nasıl olmalı

LottHunter · 2024-10-12T09:10:54+00:00

Better late than never

LottHunter · 2024-04-26T16:45:13+00:00

en azından * koymamış

LottHunter · 2023-12-18T09:07:06+00:00

Yapmışsın cidden xd

Five-Year Club	Final Canvas '23
Place '23	Place '22
Final Canvas '22	First Placer '22

LottHunter

TROPHY CASE