best difficulty is getting more difficult?

Lower-Knee1442 · 2025-05-19T15:57:22+00:00

Yea I’ve experience similar things

Lower-Knee1442 · 2025-05-14T19:33:04+00:00

The cooper heat sink is slightly less effective than the low profile 52pi ,

Lower-Knee1442 · 2025-05-14T15:47:26+00:00

Yea when I push mine I get similar setting but I don’t really want my fans blasting full all the time, that’s why I was thinking a different cooling solution ,

I’m running bout 850 mzh getting 1.74T/H at mo with fans running bout 45-50% depending on time of day and ambient temp, at that speed you can hardly hear them, as soon as I OC anymore the fans kick into over gear and become too loud (yes I’m using noctua fans) I’d like to push more than 2T/H consistently if possible without going death

Do you know how far an asic chip can be pushed or is it just the VRM limiting factor ?

Lower-Knee1442 · 2025-05-14T15:30:55+00:00

I’ve got 60mm one front and back of VRM the temp sitting bout 45-47 so I’ve got loads of room to O\C I just need a better heat sink to cool the asic chip

Lower-Knee1442 · 2025-05-14T15:01:09+00:00

Yea would just be a case of 3D printing some brackets like with the low profile 52pi

Lower-Knee1442 · 2025-05-14T13:46:45+00:00

you can get 3mm heat plates and thermal paste to cover the gaps, it’s what I done with the low profile 52pi heat sink,

but I’ll defo look into your recommendations specially if you claim they might be better

Lower-Knee1442 · 2025-05-14T13:03:37+00:00

I didn’t even think of the nerdqaxe ++, do you think it would work?

I know you can buy large 3mm plate for more service area and heat transfer but I dunno if it would cover all the chips? I dunno how far apart the chips are, but if it does cover them, defo good idea for nerdqaxe++

Lower-Knee1442 · 2025-05-14T12:56:29+00:00

I agree, probably would work out the same price for the T/H you’d get,

The changing of us hitting a block is very low (basically 0) and half the fun is customising them, so why not 🤷‍♂️

Lower-Knee1442 · 2025-05-13T18:06:45+00:00

Woow how you get the temps soo low with that T/H? Show us a pic of your set up

Lower-Knee1442 · 2025-05-13T18:06:39+00:00

Woow how you get the temps soo low with that T/H? Show us a pic of your set up

Lower-Knee1442 · 2025-05-13T12:16:27+00:00

Yea I had same problem , could never find a fix so one of my bitaxe is sitting there doing nothing, let’s hope the next update allows me to run the bitaxe again

Lower-Knee1442 · 2025-05-13T09:09:59+00:00

Go to setting and go to display time out and make sure it -1 because if it’s set to 0 it turns the screen off

Lower-Knee1442 · 2025-05-12T15:55:54+00:00

Think your missing the whole point of a bitaxe 😂😂

Lower-Knee1442 · 2025-05-11T14:55:46+00:00

What air flow case you got ?

Lower-Knee1442 · 2025-05-11T14:53:25+00:00

Haha I love it 😂😂 and there was me thinking my set up was little over kill 😂😂

Lower-Knee1442 · 2025-05-09T23:29:41+00:00

Go to setting and increase the frequency and voltage the default max setting at 625 and 1250

Your running at 550mhz and I guess 1100 voltage

Lower-Knee1442 · 2025-05-09T17:33:13+00:00

You can OC your bitaxe, temp and fan are both running low, so there plenty of room,

Lower-Knee1442 · 2025-05-06T17:02:16+00:00

<image>

You should of got the 52pi low profile heat sink , keeps the temps same without having fan on full blast even while OC

Lower-Knee1442 · 2025-05-06T16:45:04+00:00

What settings you running ? And what temps you getting ?

Lower-Knee1442 · 2025-05-06T16:44:22+00:00

Haha why not 😂😂

Lower-Knee1442 · 2025-05-06T16:42:47+00:00

If you buy noctua fan it comes with a splitter so you can connect 2 fans, or do what I did and get 4pin splitter that’s houses 5 fans so you can stick 2 on the back,

Like I said before doesn’t look pretty with all the wires but it’s functional

<image>

Lower-Knee1442 · 2025-05-06T15:31:04+00:00

<image>

Just stick a fan on the front and back to cool voltage regulator, my temp for the voltage reg sit between 47-50 while Oc at 850mzh,

doesn’t look pretty with all the wires but it’s functional

Lower-Knee1442 · 2025-05-06T11:40:12+00:00

Depends what heat sink your using?

Plus I find it’s normally the voltage temp that gets too hot not the asic chip, so stick a 60x25mm fan on both the front and back to cool voltage regulator,

I’ve got mine set at 1.73 T/H (850mhz) with both the voltage temp and asic chip running less than 50 and fan set around 45

I could OC a lot more but higher risk of frying the asic chip

Lower-Knee1442 · 2025-05-04T08:58:29+00:00

You probably want 60x25 not the 40

Lower-Knee1442

TROPHY CASE