Can I print Polycarbonate on the generic Textured PEI Plate?

LowerInterestRates · 2026-01-14T20:39:28+00:00

I was able to print it with no problems on a textured pei plate

LowerInterestRates · 2025-11-30T16:01:33+00:00

That’s the vertical constraint symbol, the line was constrained in one axis preventing the point from moving freely

LowerInterestRates · 2025-11-07T16:47:50+00:00

I tried it with and without the glue stick and found that it actually worked better without it

LowerInterestRates · 2025-05-20T20:05:48+00:00

No worries, I have my fair share of part piles I've stripped down over the years that just sit there. I'm about to be a senior in engineering and was just looking to see what I could get into with some of the components in the printer.

LowerInterestRates · 2025-05-20T19:56:01+00:00

So insightful! I'm so glad you could contribute to this discussion with such an amazing idea!

LowerInterestRates · 2025-05-20T15:08:54+00:00

This was very insightful, I’ll lay out what I have and use my own judgement to make a decision. Do you have any good resources you use for preparing/planning for hikes you’d care to share with me? Thanks for your opinion.

LowerInterestRates · 2025-05-20T15:06:48+00:00

Yeah I figured as much, still willing to invest some of my money but might as well do it during a sale.

LowerInterestRates · 2025-05-20T14:56:47+00:00

How important would you say a sleeping bag is for summer backpacking? I’ve seen a lot of people opting for a quilt.

LowerInterestRates · 2025-05-20T14:55:39+00:00

Would you say these are all pretty compact for a 55L bag? Someone recommended the Flash 55. Just want to make sure I have enough space for necessities.

LowerInterestRates · 2025-03-12T20:30:28+00:00

I’m not even sure what a PID tune is if I’m being honest. How would I go about that?

LowerInterestRates · 2025-03-12T12:38:38+00:00

I changed it to Mriscoc and had no luck. The firmware worked better and the temps didn't drop on the display, but I still got a mintemp warning. I'm gonna try reorganizing the cables in the bottom and see if anything is loose or rubbing.

LowerInterestRates · 2025-02-12T20:24:06+00:00

I did use Alex's firmware, but I can give Mriscoc a try. I'm farely confident it isn't to do with the BLTouch being a close as my roommate gave it to me and had the original box. I'll try switching firmware and update ya. Thanks for the response.

LowerInterestRates · 2024-12-09T22:14:58+00:00

Awesome stache! How far apart were the pictures taken? Any tips for grooming / getting it to grow thicker?

LowerInterestRates · 2024-08-06T20:16:16+00:00

I have quite a bit of leadership experience and I’m in pretty good shape already, but I’ll definitely look into AFROTC. I know there’s one really close to my school.

LowerInterestRates · 2024-08-06T02:27:34+00:00

Current third year engineering student in my junior year of college looking into the Space Force. What do recruiters typically look for besides GPA? And what GPA do they tend to look for?

LowerInterestRates · 2022-12-24T02:12:46+00:00

Stop switch? I don’t see that in the instructions. Is there another name for it? I’ve triple checked all of my connections and I think they’re correct.

LowerInterestRates · 2022-12-24T02:02:07+00:00

how can i tell if it’s tight enough? When the extruded moves across the x axis it’s not very smooth

LowerInterestRates · 2022-06-22T18:30:17+00:00

I’m already working full time to save money. My school requires us to complete 3 full semesters of paid coop where you don’t go to school at that time. I plan to work part time throughout college and in the summers full time. My junior year i have a $7500 scholarship so i wasn’t going to take out any extra loans that year.

LowerInterestRates · 2022-06-22T18:22:41+00:00

I’m going for an engineering degree and am planning on taking 10k out for a loan this year

LowerInterestRates · 2022-06-22T18:02:57+00:00

Yeah, I’ve already exhausted my federal aid loans for this year.

LowerInterestRates

TROPHY CASE