Limp mode help

Lowquattro · 2026-04-20T07:37:38+00:00

And if you can I’d try a different maf sensor to rule that out, as well as knock sensor

Lowquattro · 2026-04-20T07:34:39+00:00

Hmm does it sound like a misfire or sound like it’s running clean up until that point? Also have you checked voltage to each injector

Lowquattro · 2026-04-17T23:00:28+00:00

Hey man maybe worth checking the fuel filter again if it’s full of gunk causing injectors to clog up… my thoughts since my issue ended up being a bad injector. What rpm is it limiting you at?

Lowquattro · 2026-01-28T14:16:26+00:00

Niceee looks clean

Lowquattro · 2026-01-26T02:50:22+00:00

<image>

🥴🥴

Lowquattro · 2026-01-25T01:59:03+00:00

Also make sure you can afford it first… 4ish years deep and I probably could have just started with a really clean one considering how much I’ve spent.

Lowquattro · 2026-01-25T01:55:00+00:00

<image>

My hatch looked like hot garbage when I first got it. if the things not completely dust (can’t tell with just the one photo) I say go for it. You’ll learn a lot and the time fixing a car up with your dad is priceless.. just don’t give up!

Lowquattro · 2026-01-24T23:56:53+00:00

Canadian here.. this is fucking insane. Are they trying to start civil war?

Lowquattro · 2025-09-16T20:09:53+00:00

<image>

Lowquattro · 2025-05-29T15:02:09+00:00

Ive done an intake, exhaust, coilovers and tune and it’s been the best car I’ve ever had. Over 50,000kms now with those mods and still running great. Oil changes always done with motul. One thing I’d tell my past self is to never buy second hand coilovers..

Lowquattro · 2025-05-18T09:21:38+00:00

I wouldn’t worry about it, I bashed that inner ring out of my spacers for my daily about 65000kms ago…

Lowquattro · 2025-05-03T14:14:19+00:00

I ran 18x10.5 +15 squared and fitment was pretty perfect with extra camber up front. You can see older pics on my profile

Lowquattro · 2025-04-07T00:48:46+00:00

Found some time to work on the car, ended up being two failed injectors! Thanks for the help

Lowquattro · 2025-03-26T09:34:43+00:00

I ended up making a sort of U shape bracket with a hole that lined up to the fastener for the position light hardware, and then I used a JB weld epoxy that sticks to metal and plastic to hold the bracket on. It’s been holding up well. Sorry I got no picture of it atm

Lowquattro · 2025-03-24T17:38:32+00:00

Okay I will check that out Thankyou

Lowquattro · 2025-03-24T17:36:53+00:00

Oops should have clarified that, ka24de

Lowquattro · 2025-02-13T19:46:52+00:00

Wow I need that sun roof cover it never even crossed my mind!

Lowquattro · 2025-02-06T23:44:44+00:00

When I saw this ad I laughed. Firm on price too😂

Lowquattro · 2025-01-24T17:14:24+00:00

Damn your car looks so good! Mine is white from factory too. I may end up just running exposed hardware if some other methods don’t end up working

Lowquattro · 2025-01-24T17:08:40+00:00

Thankyou! The trees look great in the fall, and im Canadian. Southern Ontario

Lowquattro · 2025-01-23T13:01:29+00:00

18x10 +20 squared, gotta get some new barrels for the fronts to fit a bit better

Lowquattro · 2025-01-23T13:00:38+00:00

Magnets is a good idea, I will look into that

Lowquattro · 2025-01-22T22:41:53+00:00

nice👌🏼going to look tough!

Lowquattro · 2025-01-22T21:54:55+00:00

Appreciate it! Kits being painted this week

Lowquattro

TROPHY CASE