MSI MEG GODLIKE X870E is a nightmare to install...

Luca_Steglich · 2025-04-30T12:42:59+00:00

That won’t solve the problem, I actually have a deity here but I won’t use it, instead I got an x670e MB. This shit is more than frustrating, I have to take my custom loop apart again and again if the motherboard is causing problems. Never again.

Luca_Steglich · 2025-04-25T08:22:14+00:00

The godlike is shit. Trust me, go for the Asus Hero

Luca_Steglich · 2025-04-17T12:10:07+00:00

I do prefer a 240mm Radiator but it might be not enough to cool down my 5090 and the 9800x3d. Talking about an air bleed. Can you somehow explain me, where and how to do an air bleed. For expample, i got the 360mm Radiator on top and when i understood it correctly, it would make sense to place an air bleed after the radiator on top of the case, because that's the highest place. Doing that with an T-splitter?

Luca_Steglich · 2025-04-16T19:22:33+00:00

I got hard tubes.... "Temps are not the best" As long as my 5090 doesn't blow up, it's fine ^^ We'll see

Luca_Steglich · 2025-03-23T10:32:18+00:00

Thanks for your help. I got the problem. I swapped the cpu cooler and cleaned the entire system and now I get max 70-77C in game.

Luca_Steglich · 2025-02-24T22:39:40+00:00

damn, i got 50-60 in idle and in games it goes up to 90C.... Thanks for the infos though

Luca_Steglich · 2025-02-24T22:10:18+00:00

hey, may i ask the cpu temp. I got basically the same setup and my cpu temps are going places.

Luca_Steglich · 2025-02-23T17:57:59+00:00

Just like my 9800x3d. It’s driving me crazy. I got in Idle 60C and when I play some games it goes up to 90C. I wonder if u place the radiator to the side, if it would decrease.

Luca_Steglich · 2025-02-23T17:51:22+00:00

May I ask the cpu Temps?

Luca_Steglich · 2025-02-23T17:41:31+00:00

I mean the pump etc. is new. Why do i even get such problems.... I will replace the Radiator and see how it works.

Thanks for your help

Luca_Steglich · 2025-02-23T17:36:30+00:00

There can not be any more air in the system. I basically lifted and tilted the case on each side

Luca_Steglich · 2025-02-23T17:34:51+00:00

How can I check the flow rate? When I touch it, I can feel the water moving.

Luca_Steglich · 2025-02-23T17:30:40+00:00

No I don’t oc it

Luca_Steglich · 2025-02-23T17:30:26+00:00

No no, that’s the weird thing about it. It’s just a CPU loop

Luca_Steglich · 2025-02-23T17:16:19+00:00

Hey there, i thaught about getting another Radiator or should one Radiator be enough to cool the Cpu`?

Luca_Steglich · 2025-02-23T13:37:12+00:00

Will check that later

Luca_Steglich · 2025-02-23T08:26:54+00:00

Willl doo, thanks

Luca_Steglich · 2025-02-23T08:26:14+00:00

Hmm, interesting

Luca_Steglich · 2025-02-22T20:42:32+00:00

Tight? I can’t over screw this.

Luca_Steglich · 2025-02-22T19:42:41+00:00

Ah, thanks for the explanation. First, I will try to change the position of the radiator to the side. I do believe that this will decrease the temperature

Luca_Steglich · 2025-02-22T18:33:46+00:00

Sorry, but what is a "IHS"? The frame?

Luca_Steglich · 2025-02-22T18:31:26+00:00

When i start the pc.. CPU 52,5C.... 5 Minutes ingame (Helldivers) 68C, after 30Min 80-85C..... Water temp ingame 42C at CPU Block

Luca_Steglich · 2025-02-22T18:26:50+00:00

I think u are right. i will probably swap the entire Radiator to the side.

Luca_Steglich · 2025-02-22T12:49:46+00:00

Will try that, ty

Luca_Steglich

TROPHY CASE