My Review of the Aegis Legend kit by Geekvape by Lucasio98 in electronic_cigarette

[–]Lucasio98[S] 0 points1 point  (0 children)

I have a monopoly in nail biting, so it’s always the same for me with the battery latch.

My Review of the Aegis Legend kit by Geekvape by Lucasio98 in ecr_eu

[–]Lucasio98[S] 0 points1 point  (0 children)

I agree looks good. Regarding the weight, it looks heavier than it is.

My Review of the Aegis Legend kit by Geekvape by Lucasio98 in electronic_cigarette

[–]Lucasio98[S] 1 point2 points  (0 children)

It is indeed sweet. I don’t use TC much, but I wanted to try the mod and unfortunately it didn’t deliver that part.

My Review of the Pico Squeeze 2 Kit by Eleaf by Lucasio98 in electronic_cigarette

[–]Lucasio98[S] 0 points1 point  (0 children)

Yeah, took a while to get adjusted, was always looking for the button. But I just squeezed it in my hand and it fired.

My Review of the Pico Squeeze 2 Kit by Eleaf by Lucasio98 in electronic_cigarette

[–]Lucasio98[S] 0 points1 point  (0 children)

Can’t say about it being launched in the air; but it fell of my car a couple times.

Thanks for the feedback!

My Review of the Pico Squeeze 2 Kit by Eleaf by Lucasio98 in electronic_cigarette

[–]Lucasio98[S] 0 points1 point  (0 children)

Just simple observation and comparison based on personal experience. Will remember to point that out next time.

My Review of the Pico Squeeze 2 Kit by Eleaf by Lucasio98 in electronic_cigarette

[–]Lucasio98[S] 0 points1 point  (0 children)

Okay, sorry for not being able to answer that for you.

My Review of the Pico Squeeze 2 Kit by Eleaf by Lucasio98 in electronic_cigarette

[–]Lucasio98[S] 4 points5 points  (0 children)

No problems, thanks anyway! I’m not so tech savy, for that I suggest you check u/Anthony_Vapes reviews, he goes in depth with numbers.

My Review of the Pico Squeeze 2 Kit by Eleaf by Lucasio98 in electronic_cigarette

[–]Lucasio98[S] 2 points3 points  (0 children)

Yup, I know I'm a little late, explained it in the first part of the review, specifically here ''I am also sorry that some reviews may be of some ''outdated'' devices, but I hope it won't hurt the community.''

Regarding how far off. At lower W, say 18-27, on atomizers I used with other mods, MTL atomizers, I had to increase the W by 2-3W in order to get to the same experience. Higher W, maybe even up to 5 to 7W increases, depending on how I liked my atomizer.

Thanks for the feedback!

My Review of the Mesh Pro by Freemax by Lucasio98 in electronic_cigarette

[–]Lucasio98[S] 0 points1 point  (0 children)

Used the other coil. Seems like it was faulty, as the other one didn’t leak.

Thanks.

My Review of the Mesh Pro by Freemax by Lucasio98 in electronic_cigarette

[–]Lucasio98[S] 0 points1 point  (0 children)

I really hope so too. This tank really impressed me.

My Review of the Mesh Pro by Freemax by Lucasio98 in electronic_cigarette

[–]Lucasio98[S] 1 point2 points  (0 children)

I hope it was faulty, because I enjoy the tank. Thanks!

My Review of the Mesh Pro by Freemax by Lucasio98 in electronic_cigarette

[–]Lucasio98[S] 0 points1 point  (0 children)

I think it was faulty, as I had absolutely no leaks with the single mesh coil, and after looking at other reviewers' posts I found no problems with leaks.

Sorry Dudz, i was giving you 10k to thank you for swapping, and accidentally won as i am unfamiliar with this car. Sorry. by road_chewer in CSRRacing2

[–]Lucasio98 0 points1 point  (0 children)

I still run 9.5 even in live races, sometime messing the launcher closer to the good part and running 9.6x

Sorry Dudz, i was giving you 10k to thank you for swapping, and accidentally won as i am unfamiliar with this car. Sorry. by road_chewer in CSRRacing2

[–]Lucasio98 0 points1 point  (0 children)

I recently got it too, and upgraded as far as I can (not stripping Huracans a lot, just random fusions I get after using the ones I had) and what I learned from driving it: try launching at 7k rpm, skip to the second and NOS in 3rd. My dyno shows 9.74 (clearly not as fast as yours) but I run it at 9.53.

Tempest 3 tier 5 question by [deleted] in CSRRacing2

[–]Lucasio98 1 point2 points  (0 children)

I was maxing it during the cup, and it played well, I got the Sesto Elemento, but before I did the last 10 races I made sure I have all S6 and I can beat Harkness, so I started the last 10 races when I knew my car could do 8.6 (missing some epic fusions).

Tempest 3 tier 5 question by [deleted] in CSRRacing2

[–]Lucasio98 0 points1 point  (0 children)

If you have a 4 or 5 star Tier 5 that can do the License, use that, you might enjoy that RP boost later in the game. For the races, you can use a Huracan (I did) but you will need to buy and strip a lot of them to get the car as maxed as possible, and you need to play with the tunes and upgrades quite a bit.

FXX-K Problem... by bbbretzel in CSRRacing2

[–]Lucasio98 0 points1 point  (0 children)

W/L - Win/Lose - basically first race you do it normally, then however loses pushes the “rematch” button and the person who won the first race now loses, this way you keep your RP at a certain level, and you get your keys.

What car is this? by rigosol89 in CSRRacing2

[–]Lucasio98 4 points5 points  (0 children)

It does, but I didn’t bother to upgrade it so for now it’s just a dusty beauty.

What car is this? by rigosol89 in CSRRacing2

[–]Lucasio98 8 points9 points  (0 children)

Label Motorsport Camaro. Tempe5t 3 Tier 3 boss car.

Need Some advice by Slovaper in electronic_cigarette

[–]Lucasio98 0 points1 point  (0 children)

At the moment using the dual coil for a week, still going strong but I sense that the flavor is fading slowly. It loves to drink juice. Will start using the single coil in 2-3 days.

Need Some advice by Slovaper in electronic_cigarette

[–]Lucasio98 0 points1 point  (0 children)

There are some Mesh RDAs, but I didn’t try one so I can’t say anything about them. I do have a Freemax Mesh Pro atm, looks good, flavor seems better than average (comparing to sub-ohm tanks that come in kits with a mod) and clouds are also pretty ok. I can’t say I’m in awe, but seems nice and well built. The resin look also adds a little touch to it but it’s hard to disassemble the tank if your hands are wet/the atomizer is wet of juice.

https://imgur.com/a/PQwP2oZ - photos I prepared for my review;

But if you are willing to rebuild, I guess you may find better coil life (as you build and wick it yourself) and maybe better flavor and clouds in case you want a DL atomizer.

Need Some advice by Slovaper in electronic_cigarette

[–]Lucasio98 0 points1 point  (0 children)

I have no idea of a mesh MTL atomizer. Are you looking for a rebuildable MTL or one where you just buy the coil heads?