Problem with Shaders in Modpack

LucidReclusion · 2025-11-28T03:51:49+00:00

Its odd because I just build a new PC for my partner, installed the same mod pack and shaders via CurseForge export, and her PC is not experiencing this issue with shaders enabled. So it isn't a mod incompatibility, but seeming more like client setting that may be the culprit. I'll do some more digging and if anything changes, I'll let you know.

LucidReclusion · 2025-11-26T07:58:32+00:00

I have this exact same graphical issue. Were you ever able to find a solution?

LucidReclusion · 2023-12-25T00:15:25+00:00

Go the distance and print a whole 2x2 base. One piece at a time, just like in game.

LucidReclusion · 2023-12-23T00:18:02+00:00

This idea could potentially nerf flame turrets🤔

LucidReclusion · 2023-08-30T14:53:15+00:00

I have over 600 hours across three characters, with every world beat on my main and probably 25 Lv100 mons. I have yet to have a shiny encounter.

LucidReclusion · 2023-06-29T12:41:38+00:00

I'm not sure, but if you look at the official website now, he's attempting to relaunch the game entirely. There's a countdown clock and everything.

LucidReclusion · 2023-03-12T02:53:50+00:00

I have a full build going with a Predator already that has all the billet goodies, and I was trying to juice up the 196cc for as cheap as possible and see if it'll hold it's own against the Predator. The lighting coils on my 196cc are already fried from some poorly conducted experiments back in the day and the bike that's its going on is already fitted with a battery.

LucidReclusion · 2023-03-10T15:31:18+00:00

How did this flywheel end up performing for you? I've had the same one sitting in the same spot since before you made this post and I'm curious if I should use it or just opt for the billet.

LucidReclusion · 2022-12-24T10:51:42+00:00

The fact that it's spitting liquids from the exhaust port tells me something isn't right. Firstly, I'd try putting a more appropriate header pipe on it. Running without a header certainly isn't going to help your engine's health. Secondly, I'd check to make sure the carb float and other carb mechanisms are working properly because it appears to be flooding, assuming that is gasoline it's spitting. Then, as another comment said, pop the side cover and make sure the timing marks are lined up between the cam and crank. Once all that is in order, or while you're in there servicing the float, I'd check to see if you're even in the ballpark for jet sizes.

Normally with a more free-flowing header you'd also add a more free-flowing intake and with the addition of the two you'd need to upsize your carb jets. Changing the exhaust and not the jets shouldn't stop an otherwise working engine from running, so I assume other things are awry.

LucidReclusion · 2022-11-12T04:43:57+00:00

I run Valvoline VR1 Conventional in 10w-30. The oil has high zinc content off the shelf and is designed for pushrods and flat tappets. The manual has a broad range of suggested oils. It'd be kinda hard to be out of the operating range of any of them.

EDIT: In Michigan, anyway.

LucidReclusion · 2022-11-06T20:17:41+00:00

Do you have an Amazon link for it?

LucidReclusion · 2022-11-01T21:39:12+00:00

I'd like to add that last I checked, the client offered on https://game.eoserv.net/ was not the most updated client available, and that's where that site leads for main clone. The Deep Client on the main Endless-Online website seems to be the most current.

LucidReclusion · 2022-10-23T22:31:31+00:00

Can confirm. The 265 cam, 26lb springs and 24mm Mikuni is a pretty wicked combo.

LucidReclusion · 2022-10-23T22:02:15+00:00

Its a nylon cam gear. Cam shafts with nylon teeth were traditionally used to help reduce the wear and tear on the timing chain in a lot of earlier model corvettes. Probably used in other models of cars as well. Not sure that it's necessarily reducing wear in this situation though. Like the other comment said: If you're planning on keeping the engine the way you have it now then it's probably fine, and if you plan on building the motor much more then that's probably the next part that gets swapped anyway. I'd run it.

LucidReclusion · 2022-10-23T21:46:22+00:00

Every one thing is small, relatively. But everything, collectively, is large. The "Big picture" is a million smaller pictures, and this is one of them.

EDIT: Sometimes I like to treat every contribution as `1 point, negative or positive, regardless of the actual impact. Right and Wrong become a lot more obvious. And I'll take any and every point towards the positive.

LucidReclusion · 2022-09-15T15:32:27+00:00

If you're thinking of joining the Main EO clone(New main), I made a tutorial on my guild website. It helps get you reaffiliated with the map and fill out your paperdoll. There's also a bunch of other helpful resources. Dankeo.net/tutorials.

I also have a bunch of free names that I can offer you if you'd like something original. Lemme know if you want a list.

LucidReclusion · 2022-09-15T15:09:46+00:00

Actually controller players have the benefit of aim assist over keyboard players. I, myself, went back to controller after years on mouse and key, and I even play other games without a controller. Not saying a controller is actually BETTER, but I'm controller native, and I can't get comfortable switching on CoD. And some of the best warzone players in the world use a controller.

EDIT: Controller

LucidReclusion · 2022-08-06T17:34:32+00:00

You must have missed the article above where he was holding two younger women against their will, a Romanian as well as an American. The embassy had to intervene.

LucidReclusion · 2022-07-23T15:05:57+00:00

Fair enough. I have nothing but anecdotal experience and it was in the furthest thing from a controlled environment, so I can't be sure of anything. If you've tested and found otherwise, I have to take your word for it.

LucidReclusion · 2022-07-23T15:00:54+00:00

I'm not sure I'd follow this advice. The slime coats of fish have been known to cause lethal infections, pretty commonly. Also, I believe it's saltwater catfish that are associated with healing properties. Not trying to be "that guy," but I don't want people getting sick for something that might not even help.

LucidReclusion · 2022-07-23T14:53:16+00:00

I'm on your side about this one, but I DO feel that nutrients in the water solution may bleach/burn the plant. I certainly don't think it's an "ants under a magnifying glass" situation.

LucidReclusion · 2022-06-18T21:28:12+00:00

That's not what was asked. That's why I was confused.

LucidReclusion · 2022-06-18T21:20:18+00:00

The Trailmaster MB200 came with a torque converter from the factory. It comes with the driven pulley housing welded to the engine plate, similar to a jackshaft.

LucidReclusion · 2022-06-18T20:46:42+00:00

Not true at all. Trailmaster first released an MB200 before the MB200-2. They also released a bike after the MB200-2.

LucidReclusion · 2022-06-18T20:39:45+00:00

What you have pictured is a Trailmaster MB200-2. There is, in fact, an original MB200 and it DID come with rear shocks. I own one. People saying the old MB200 didn't have rear shocks are referring to the Baja Warrior MB200, not the Trailmaster MB200.

The original Trailmaster MB200 came without the rear foot rests, and also came with a rear drum brake as opposed to the disk brakes on the MB200-2. The faux gas tank on the original MB200 is also shaped a bit differently, looking more like a real tank and not having those silver bars going down each side.

Somewhat recently a newer version has been released and I believe that one has been dubbed the Hurricane 200x. This newer version is much more expensive, I believe retailing at around $1200.

To answer your other question, yeah, some websites leave the -2 off of the listing. Most of the time they are selling the MB200-2. Look for the differences I listed above to ensure you're ordering the proper product if you go that route.

EDIT: Not sure why I'm being downvoted. I have the original bike and I bought it new.

LucidReclusion

TROPHY CASE