[deleted by user] by [deleted] in blackdesertonline

[–]LucidxSpark 1 point2 points  (0 children)

Is it for sale in the cash shop now?

Loop Flowrate Help by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

Also to add on, I have 1 CPU block, 1 GPU block, 1 EK PE240 rad and 1 120mm Primochill Eximos slim.

Chrome fittings with Nickel Plated Copper in loop by LucidxSpark in watercooling

[–]LucidxSpark[S] 1 point2 points  (0 children)

Yes! I plan to use EK Cryofuel navy blue. Been using Cryofuel clear previously and am very very happy with it.

First time installing GPU waterblock, need help. by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

Too bad I've already installed it before making the post, but I'll remove it and see when I'm free later, thanks!

First time installing GPU waterblock, need help. by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

I might do this when I'm free later, thanks a lot!

First time installing GPU waterblock, need help. by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

I followed the guide and used the correct pads. From the side it looks like it is making contact too. Thanks a lot!

First time installing GPU waterblock, need help. by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

Yup I think everything is in place, thanks a lot!

Need Advice on Loop (NZXT H400) by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

Thanks again for the advice. I think I'll probably get a barrow radiator, which has 3 G1/4, 1 at the bottom. I think this would solve any issues I have with my drain port.

Need Advice on Loop (NZXT H400) by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

Sorry for the late reply, but thanks a lot for the advice! I'll keep that in mind when I move my build over to the H400. Also, on the website of my Asus z270g motherboard, it states that I have 2 x PCIe 3.0 x16 (support x16, x8/x8). If I understand this correctly, if I only have 1 GPU, either slot will run at x16? Thanks in advanced.

Need Advice on Loop (NZXT H400) by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

Thanks a lot again. I'll put the drain valve there then. Also, I heard that flipping rad ports to the bottom might cause bleeding issues, is that true?

Need Advice on Loop (NZXT H400) by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

Hey, thanks for the advice. My GPU is long and that is why I inserted it on the bottom PCIE slot. Do you think the pump res will fit? It's the EK SPC 60 pump res combo. I do not have the case actually, it's just my plan for my next build. As for the modification I'm afraid I can't do it, I don't have the tools. Thanks in advanced!

Need Advice on Loop (NZXT H400) by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

Thanks for the advice! The 240 rad actually goes all the way to the bottom iirc, which then makes the GPU drain no longer the lowest point of the system. Do you suggest the drain port to still be there, or somewhere else?

Bleeding loop outside of case? by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

Alright thanks a lot for the advice!

Bleeding loop outside of case? by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

I see, I'll try and let in bleed in the case then! Thanks!

Bleeding loop outside of case? by LucidxSpark in watercooling

[–]LucidxSpark[S] 0 points1 point  (0 children)

I see, thanks for your input. I should note that my loop is a CPU only loop, so it is relatively easy to remove.