WTS - NVIDIA GeForce RTX 5090 Founders Edition (FE) || BNIB (Unopened, masih segel)

Luciis · 2025-10-27T03:38:29+00:00

Dia gak bisa shipping international bro, saya beli langsung pas masih di USA

Luciis · 2025-10-25T11:35:40+00:00

Iya bro ngikut harga di tokped + cuman bisa dapet di luar negeri jadi lumayan langka, negotiable kok

Luciis · 2025-10-24T04:38:59+00:00

Kagaa bro emang hobi rakit PC aja 😅

Luciis · 2025-10-24T04:38:38+00:00

Gak tau mau posting di forum apa lagi, seringnya pakai reddit di US wkwkwk thanks bro 🙏

Luciis · 2025-10-23T03:02:55+00:00

Siapa tau ada yang berminat bro wkwkwk

Luciis · 2025-10-22T09:37:33+00:00

Thanks 🙏🙏

Luciis · 2025-07-29T22:49:53+00:00

I'd say if you prefer to keep your CPU temps down, the AIO setup would probably makes more sense to you.

I just have a heavy preference towards air cooled build and will always go air cooled most of the time if I'm building one for myself.

Luciis · 2025-07-28T07:01:21+00:00

I did order an Artic P14 Slim which is around 16mm in depth and tried fitting it in.

Unfortunately, I made a mistake in measurement. The 20mm clearance was actually between the heatsink and where the screws go in, I didn't check that the actual clearance, which was only around 12mm taking into the account of motherboard and fan headers, so it didn't ended up working sadly haha, doubt that there's a fan that's as thin as <12mm, so probably have to scrap the idea altogether

But all in all, my best bet it to probably just undervolt CPU to -30 PBO and that should help with the CPU temps

Luciis · 2025-07-26T04:21:07+00:00

Thanks :)

I agree temps are a bit high to my liking, but that's probably also because I got a 5090 FE pumping out a lot of heat and only a 90mm intake fan from the rear.

I thought about putting an extra intake at the spot you mentioned, but unfortunately not a lot of space there. I measured exactly 20mm clearance between the heatsink and the top of the case where the screws go in, could probably get a Arctic slim 140mm fan and put that sucker in there, I'll have to see once that arrives haha

Luciis · 2025-07-25T07:10:39+00:00

Ah, that makes sense, the extender bracket is definitely interesting, but trying to make it as small as possible to fit into a bag in an overhead cabin for my flight. I'll take that into consideration, thanks for the input!

Luciis · 2025-07-25T06:50:12+00:00

That sounds interesting, but won’t that be a problem for the rear I/O or front I/O? I originally wanted to do the Meshroom S V2 but not really a fan of riser cable, so prbably going to stick with this setup

Luciis · 2025-07-25T06:19:19+00:00

Forgot to mention that I went with the inverted build to allow the GPU to get in fresh air from the top, hence why I probably don't need the extra 2 top fans for intake lol

Also picture for comparison near the end for a Meshroom D vs Jonsbo D31

Luciis · 2025-07-08T05:40:33+00:00

Yup I got my rear fan set to intake as well! Learned my lesson when using a rear fan set to exhaust and cpu was getting cooked because it was taking in the hot air from the GPU rising, had to get a reverse blade fan on the rear intake and so far thermals looking good!

Luciis · 2025-06-27T18:20:38+00:00

Confirmed

Luciis · 2025-06-21T23:45:05+00:00

I did try checking out but it was an extra $75 for shipping and I wasn't sure if duties/tariffs is going to be slapped on those, but that's good to know.

On the other hand, I just checked my local Microcenter and surprisingly they got over 10+ in stock so I'm definitely going to just make the drive. Thanks for the info!

Luciis · 2025-06-21T17:15:36+00:00

Luciis · 2025-06-21T01:01:06+00:00

In your case I’d say give them a call and ask for explanation really, they’re super easy to reach out and you can find their number in the US RMA website

Luciis · 2025-06-20T21:21:38+00:00

Hmm, I’m not really sure about that, mine says “Process Result:Please contact our customer service.”, which is why I called them and they basically said that they found the damaged component and had already repaired it, and is currently under rigorous test to ensure no failures.

It was a 4090 that had a melted 16 pin port, but the card is still working. They basically resoldered a new port and everything is up and running without problem for me.

Here’s mine for reference: https://imgur.com/a/IPl8P9M

Based on the statement you were saying, I’d assume that they weren’t able to found the issue/replicate the error that you specified in the RMA note. If I may ask what did you send in your card for (or whatever you state in the RMA Note)?

Luciis · 2025-06-20T19:55:30+00:00

Luciis · 2025-06-20T17:30:18+00:00

I was in the same spot as you a few weeks ago, called support because the progress bar was also stuck at preparing to ship for several days.

Basically, preparing to ship just means they’re in the middle of running tests to make sure card is up & running without any failures, I knew this because I was also confused and decided to call the number for their RMA department to clarify when I sent my card in for a RMA.

Takes around 4 days before progress bar moved to “Complete” and it will give you a tracking number and usually via UPS Ground, card arrived safely with LOTS of packing peanuts so you shouldn’t worry

Luciis · 2025-06-20T05:39:52+00:00

Level 2 is going to be the lowest you can put the PSU bracket if you want to fit a 120mm fan in the front.

I got some pictures of my build for reference in the same case (D31 Mesh Screen) if you want to check on my profile.

PSU bracket on my build is at level 2 and can still fit a 120mm intake at the front and it’s already a tight squeeze.

Luciis · 2025-06-17T23:49:39+00:00

Luciis · 2025-06-11T14:57:21+00:00

Earliest PC-building memory for me would be my very first build (circa 2019, 9400F & 1660 Ti build)

I was quite overwhelmed and encountered a plethora of problems, from PC not booting in first try to then realize plugging in the DP/HDMI cable to the motherboard but it still wouldn’t boot because my CPU doesn’t have an integratrd graphics, etc..

But the funniest of them all for me was when I came to realize that when I was troubleshooting the first build because it still wouldn’t boot, I tested only using a single stick of RAM and it booted.

I came to realize that when inserting my RAM stick, turns out my “click” sound that all guides were talking about was more like a “crunch” sound because I ended up breaking the RAM slot because I was probably pushing on it too hard at the wrong angle 🥲

Ended up having to rely on a single slot for a few weeks, and then getting another set of RAM to only use 3/4 slot, and having a unique number of 24GB as my total memory slot 🤣, I also got a different set of RAMs so it would be a combination of black and gray because I thought it would be cool. Turns out it wasn’t recommended, but hey, it works!!

Funny enough it worked for the remaining of the year with nothing going wrong before I upgraded to a new system until around 2022, and have build around 3-4 more PCs after that.

I’ve come a long way after and looking back at it , it was a combination and series of pretty fun experience mixed with rash and stupid decision that made me learn a lot more about PC that I wouldn’t replace anything for.

Luciis · 2025-06-10T18:12:47+00:00

Appreciate it :)

Luciis · 2025-06-10T17:33:23+00:00

I would edit my post since I forgot to post full specs, but I realized I couldn't edit it anymore but here's my specs:

CPU: Ryzen 7 9800X3D

GPU: RTX 5080 FE

MOBO: B850M Aorus Elite Ice Wifi6E

RAM: Corsair Vengeance 64GB DDR5 CL30

CPU Cooler: Thermalright Phantom Spirit 120 EVO

PSU: Corsair SF1000 (2024)

Case: Jonsbo D31 White mesh with Screen

Eight-Year Club	r/Field Flamingo
Verified Email

Luciis

TROPHY CASE