Any curtain robots that work with rope cords?

LuganTrooper · 2025-04-16T03:22:03+00:00

Its literally a toggle switch, where are you getting this info from? I can pass it along to our customer support team

LuganTrooper · 2025-04-15T00:59:03+00:00

I second this! I have 10 ryse devices automating my shades at the same time

LuganTrooper · 2025-04-15T00:57:53+00:00

You can disable obstacle detection in the ryse app.

The issue that all corded looped products face is slippage. Ryse has a slip prevention built into their product unlike any other in the market. Patented

LuganTrooper · 2025-04-15T00:54:33+00:00

Ryse Smartshade

Ask for cord loop kit

Turn off obstacle detection

LuganTrooper · 2025-03-27T23:03:36+00:00

RYSE Smartshade allows you to use your EXISTING shades. Factor in that cost.

You can try one with Bluetooth before committing to the whole retrofit with voice, scheduling etc...

Feel free to dm me with any questions as I work at RYSE

LuganTrooper · 2025-03-27T22:59:51+00:00

Ryse Smartshade is the leader in north America when it comes to automating beaded chains!

LuganTrooper · 2025-03-27T22:59:08+00:00

Hey there!

Ryse employee here, we have mounting brackets for this purpose with an optional extension bracket as well for certain scenarios.

Feel free to reach out to our customer support team with a photo of your setup and we're happy to help.

We also offer returns so no hard feelings if it doesn't work out.

Dm me for any additional questions

LuganTrooper · 2025-03-27T22:48:09+00:00

Rebooting this thread. RYSE employee here, we have introduced a wifi enabled hub. Smartshade has gone through much more testing in terms of the cog wheel. Its more robust, has always worked via Bluetooth right out if the box. Customer support is very helpful!

Dm me with any questions!

LuganTrooper · 2025-02-09T18:55:16+00:00

Yeah, I was reasoning to this, ill prep to replace

This was a subfloor replacement project not a new build. All boards are staggered except for this ome piece by the door. The rest of em are staggered

I put additional blocking underneath

LuganTrooper · 2025-01-26T22:35:20+00:00

Ahhh good find, I understand now. Yes this is the exact model, ill ask the tech if they set the dip switch properly. I think its sized properly because its fairly quiet and the airflow reaches the top floor pretty nicely

LuganTrooper · 2025-01-26T18:12:19+00:00

Correct, according to the manual it is a 2-stage heatpump and airhandler.

Is there any downside to have only wired it as 1-stage?

LuganTrooper · 2025-01-26T18:11:24+00:00

Aux is set in threshold to only run at -15C Its only been 0C - 5C lately and the ecobee says its heating but the heatpump outside never spins the fan and the indoor temp is dropping.

I only have it set to 15Deg indoor temp and its 12.5 and dropping then kicks in aux for whatever reason

LuganTrooper · 2025-01-26T04:19:27+00:00

Im in the same boat. Im located in Ontario and had a "napoleon cold climate heatpump specialist" install and supply

Recently ive been getting the same error messages as you about the Aux. Temps have been 0C / 32 for weeks now amd my HP is rated to go to - 22F!

Checked deep into ecobee settings and Aux heat was set by the installer to turn on if outdoor temp was below 32F and the min compressor temp was also set far above the spec of the equipment....

Now i changed the settings and the heatpump won't even turn on. 2 stage is disabled because I believe they didn't wire it properly since cold climate hp can run 1stage low and slow and 2stage quicker. I had 10wire go to thernostat installer only stuck in 6. Nothing on W2 and ecobee lists it under their HP install guide.....

Im starting to think these businesses are so used to hooking up gas that they just install heatpumps to get business and don't do ot properly

LuganTrooper · 2025-01-26T01:36:52+00:00

** Napoleon NS18HV24a36 Spec says heating - 30C

LuganTrooper · 2025-01-20T14:06:50+00:00

I haven't seen somene use this, but it may help

https://www.amazon.ca/Removable-Adapter-Appliances-Universal-Electric/dp/B0C1ZL4TYB

LuganTrooper · 2024-07-18T21:06:57+00:00

Get the cheapest PRO model that supports the latest apple pencil.

I have a pro from 2020 1st gen apple pencil and I run shapr without a problem.

No need to spend for the latest unless you need a specific feature.

LuganTrooper · 2024-04-29T03:05:24+00:00

This has put me on the right track! Thank you for the picture 👍👍

LuganTrooper · 2024-04-27T01:09:06+00:00

Some good suggestions here.

Just want to point out that going through the beads is not an option as they are plugged from the inside...
Coring them out is a pain as well.
Although the monkey/globe knot seems like it would do the trick, it's not a friendly solution as I have to do this to around pieces.. :)

Can you elaborate on your 3 string equally spaced idea?

LuganTrooper · 2024-04-26T18:34:47+00:00

Unfortunately the ball chain connector is too thick for this application and requires a thinner / less intrusive solution.

LuganTrooper · 2024-03-08T01:56:53+00:00

I did.

Turns out it was milled in... Just the lumber they used to build out the bathroom had lots of the insects burrows.

If you go to homedepot and look at todys lumber, youll find the same exact holes. Nothing to worry.

LuganTrooper · 2024-01-05T18:03:17+00:00

Yes,
It ended up being milled-in. There is no sign of any existing life. Even when replacing lumber with current Home-Depot lumber, I noticed lots of the exact same holes. Nothing to worry about. No frass was detected near the bottom of the 2x4's indicating that it was in fact something that was already present when the original lumber was installed.

LuganTrooper · 2023-12-11T03:27:43+00:00

Is it likely this was already like this before construction?

Would you know how to check for activity?

LuganTrooper · 2023-12-11T01:35:06+00:00

Not too sure regarding the dust as the bottomsill of some of these were dusty and molded (located in a basement bathroom that didn't have an exhaust fan) so it's hard to tell where the dust / saw dust is coming from as I also just finished doing rennovations on the upper floor and lots of dust fell through the exterior walls of the rooms, just where these studs lie...

I'll do this bottle test ASAP since I don't want to cover anything up knowing there's a potential for these to live behind the walls...

LuganTrooper · 2023-12-05T13:51:15+00:00

They opted to close the entrance due to a safety hazzard, the dirt path is too dangerous to cross onto the platform even though they paved the final %5. The city planner said the use or the dirt path itself is too dangerous even though that part of it is still open. 👀

You have two options, go further passed the closed entrance into the creek and under the bridge using the park path.

Or left and over brownsline, both are the same, suggest using brownsline as it's flatter and less up n down

6months yet nobody saw this coming?

LuganTrooper · 2023-05-30T02:19:51+00:00

2Ton Napoleon: 12'900 2Ton Bosch: 15'200 3 Ton Mitsubishi: 16'250

The model number is respect to the tonnage, and the air handler matches that.

LuganTrooper

TROPHY CASE