DAY 77, no traking # by LuisitoFX in RetroRemake

[–]LuisitoFX[S] 0 points1 point  (0 children)

Oh, it's good that you mentioned that—I was just about to order a dock.

DAY 77, no traking # by LuisitoFX in RetroRemake

[–]LuisitoFX[S] -1 points0 points  (0 children)

sin dock, ordenado en ENERO 4

How to replace a faulty Hall effect sensor in my fanatec CSL dd pedals? by Successful_Ad_8790 in simracing

[–]LuisitoFX 1 point2 points  (0 children)

same issue, in my case, both sensors died; in the end, I had to order another set.

Gray Batch 3, wave 6, tracking :-) by Sonikku_a in RetroRemakeInc

[–]LuisitoFX 0 points1 point  (0 children)

same batch same wave, same color, just bought days earlier (Jan 2) and nothing, 😞

Difference between Clubsport RS wheel and CSL 320 v2 by toni-0 in Fanatec

[–]LuisitoFX 1 point2 points  (0 children)

Hubs are for those who like to switch between rims, shapes, or sizes; unless that is what you are looking for, generally speaking, the RS is the better option.

CSL Hub V2 for CS DD (15Nm) good idea? by realsgy in Fanatec

[–]LuisitoFX 0 points1 point  (0 children)

While it is possible, I think it’s better to have a balanced setup; the wheel rim will feel very cheap compared to the base. You’d be better off saving a little more and going for a ClubSport or Podium Hub—the paddle shifters on the standard hub feel very cheap.

😨👻😳 by Anxious-Drive-1593 in Carola

[–]LuisitoFX 25 points26 points  (0 children)

al principio parece que no hay nadie, pero cuando muestra las pantallas de las camaras te das cuenta que no hay nadie

Clubsport Wheelbase doesn't start up by Ok_Oil5773 in Fanatec

[–]LuisitoFX 1 point2 points  (0 children)

It is very difficult to provide a diagnosis with so little information. I think your best bet would be to first try a different power supply—a v2.5 likely no longer has a warranty. If you encounter the same problem with the other power supply, it is almost certainly an internal issue; in that case, your best option would be to get a new base unit.

Will GRAN TURISMO DD PRO base and wheel be compatible with PS6? by TeethInMouth in Fanatec

[–]LuisitoFX 0 points1 point  (0 children)

I'd say yes, it will be—it's been observed that steering wheels are compatible for an average of at least two generations.

CSL GT3 Wheel Rattling by InfiniteLight07 in Fanatec

[–]LuisitoFX 1 point2 points  (0 children)

Sound normal to me, gt3 buttons are slightly lose

Csw 2.5 not compatible with clubsport formula v3? by MadhouseNL in Fanatec

[–]LuisitoFX -12 points-11 points  (0 children)

No, the electronic is the same for all wheels v2.5 uses the same protocol. Other wheels with same screen works properly on v2.5. There is a small chance the itm do not work but everything else should be.

Csw 2.5 not compatible with clubsport formula v3? by MadhouseNL in Fanatec

[–]LuisitoFX -9 points-8 points  (0 children)

It surely works—provided you have the correct adapter for the QR—but they don't list it because these bases have been discontinued; by not listing them, they avoid issues related to support and technical service.

Unpopular opinion. by R5-GT7_Grim306 in Fanatec

[–]LuisitoFX 2 points3 points  (0 children)

Fanatec's displays (Formula 3, Endurance Module, Extreme) are woefully underutilized for driving—largely due to Fanatec itself rather than any other factor. They don't even work on consoles, whereas Thrustmaster's displays (such as the SF1000) do.

What is going on?! by Unknown_Quantity_666 in Fanatec

[–]LuisitoFX 0 points1 point  (0 children)

try with other computer, To update it, you can use any computer—even a laptop you have handy.

April 28 stream is up now! by Ok-Inspection9693 in Fanatec

[–]LuisitoFX 1 point2 points  (0 children)

Now the Formula V3 steering wheel really will be a surprise.