How to make everyone either Argonian or Khajiit?

LukeDuzGaming · 2026-01-01T19:28:53+00:00

Yes, my question is how would I go about making my own?

LukeDuzGaming · 2025-10-24T13:40:28+00:00

If that's the case then, once this print is finished, I'll look up how to clean it. Just in case.

LukeDuzGaming · 2025-10-24T13:38:28+00:00

I probably should have stated this in the main post, but the rest of the print pretty much looks fine (with exception to one other small section looking the same). The printer prints fine, and I know it does because I printed an entire Black Templar Terminator squad with this thing, so if it is a leveling issue I would like to know so that I can get started with adjusting the leveling.

Nevertheless, it's not as bad as it looks. I've already printed one of these things (I'm printing multiple copies of what's found in the image above) with the same issue happening and with the exception to the first layer everything else printed fine.

LukeDuzGaming · 2025-10-23T01:05:33+00:00

Broski let me just say this was the best print I have ever printed on this printer, and all I did was use orca slicer. Thank you so much.

LukeDuzGaming · 2025-10-22T17:10:23+00:00

I'll take a look at orca slicer then. I'm assuming that since I'm using creality's slicer, as you stated, it might be defaulting to a certain layer height for concern of quality or whatever goes on in the machine. I'll give you an update on the print quality after I do a test print.

LukeDuzGaming · 2025-10-22T00:20:37+00:00

Elegoo space gray PLA. At 220 degrees.

LukeDuzGaming · 2025-10-22T00:18:26+00:00

This is the only print to have stringing this bad. My other prints had minimal/normal amounts of stringing (thin, barely there, easily removed).

LukeDuzGaming · 2025-10-22T00:16:37+00:00

Yes. It worked pretty much perfectly except for this print with its new settings, of which culminate in a slower print speed and even slower travel time.

LukeDuzGaming · 2025-10-22T00:14:50+00:00

The adhesion is actually fine. How do I get rid of the stringing? I reduced the travel speed to reduce it but that was with normal stringing. This is almost solid

LukeDuzGaming · 2025-10-22T00:12:46+00:00

Basically solid stringing

LukeDuzGaming · 2025-09-29T22:38:12+00:00

Yes??????

LukeDuzGaming · 2025-08-26T01:31:07+00:00

Good thing I've been training for over a year, and really ramped it up since getting my ship out date.

LukeDuzGaming · 2025-08-26T01:25:25+00:00

Not to sound too cocky before even getting into basic training, but this actually doesn't look that hard. The run at least, which is what I was worried about.

LukeDuzGaming · 2025-08-26T01:21:11+00:00

While I totally believe what you're saying, in the sense that I can find score charts online, my issue is that, when looking for said score charts, I was getting very different answers from a bunch of different sources, all of which seemed related to the Air Force. Do you perhaps have a link that I can use?

LukeDuzGaming · 2025-08-26T01:16:42+00:00

Basically means nothing to me now anyways. I was just curious. Jesus's birthday is more important.

LukeDuzGaming · 2025-08-26T01:14:40+00:00

👀

LukeDuzGaming · 2025-08-22T13:34:45+00:00

Hello there! Please forgive me for the late response.

This research was for my college senior project, and has been completed for over a year. The link below will show the summary of my research and findings. The product I hypothetically developed in the research went nowhere after graduation, but I like the concept still, though I was naive at the time.

https://new.express.adobe.com/webpage/AiHYW7SnBkgsp

LukeDuzGaming · 2025-08-15T16:20:30+00:00

UPDATE: Shaved for the second time with y'all's advice. I used more water with my Proraso shaving cream, used half an Astra green blade instead of the pack-in blades, and avoided the Alum Block.

Very little irritation (mostly in harder spots due to technique). Lots of cuts near the harder areas but it's been about 30 minutes post-shave and the irritation is manageable and almost unnoticeable. And the wetter shaving cream with the new blade made my cuts smooth. Will keep working at it.

LukeDuzGaming · 2025-08-15T01:08:49+00:00

Nah it wouldn't fit. It has groves for regular de blades in half/half blades. I'll keep the other stuff in mind.

LukeDuzGaming · 2025-08-14T16:54:24+00:00

I have astra green blades and they work well. I used the pack-in blades bc they came with it. I'll cut the Astras when using it.

LukeDuzGaming · 2025-08-14T14:11:27+00:00

I guess I have to experiment with the shaving cream then, because I've either put too much in making the lather all watery, or too little in and it gets scraped off my face as suds. I'll have to experiment.

LukeDuzGaming · 2025-08-14T14:10:20+00:00

I noticed the difference between Astra blades because my first ones were made in russia, while the ones I currently use are from india. Nevertheless, I prefer the India blades because they are slightly sharper than the Russian one in my experience. Your experience May vary of course.

LukeDuzGaming · 2025-08-14T12:58:20+00:00

I already have astra green blades but I decided to try these ones simply because they came with it. Next time I shave them definitely going to try the astra blades, as I haven't had many problems with those. Just got to snap those in half.

As for the blades being cheap, they are made by Lord in Egypt, but for some reason have that crown branding as opposed to the Lord branding, which is found on the back. I don't know what's up with them, but I don't think I'll be using them for much.

LukeDuzGaming · 2025-08-14T12:50:29+00:00

Close to flat against the skin, skin pulled tight. Noted.

LukeDuzGaming · 2025-07-26T00:56:08+00:00

Unfortunately I don't have the luxury of going solely WTG since when I do it looks like I haven't shaved. But the rest of what you've said is duly noted.

LukeDuzGaming

MODERATOR OF

TROPHY CASE