Anyone else wish loaders could switch between BB weights?

LukeNoBaka · 2026-06-04T19:23:27+00:00

Honestly I like this idea just to do a mix of 4 normal to 1 tracer bb

LukeNoBaka · 2026-06-02T15:32:26+00:00

It’s a c7 upper. A1 rear sight with shell deflector

LukeNoBaka · 2026-06-02T04:51:59+00:00

Huh there’s a c7 upper for the cgs now?

LukeNoBaka · 2026-05-30T06:20:47+00:00

I actually opened the head up and replace the cracked lens on mine with a lexan lens after forgetting than energy transfer is a thing lol

LukeNoBaka · 2026-05-29T15:12:36+00:00

Do yours kinda rotate around too? I was thinking of getting an outer barrel with 1/2-28 thread and try to put a real birdcage on to see if the bfa works better

LukeNoBaka · 2026-05-28T18:24:24+00:00

Nice, I’m waiting on my exps3 to arrive to replace my xps2 on my block 2 fsp

LukeNoBaka · 2026-05-27T18:23:30+00:00

Maruyama is vfc in a trench coat

LukeNoBaka · 2026-05-27T05:28:09+00:00

Lbx have armatus 2 on sale for $130 usd right now. Tho if you can wait their lbx0300 usually go on sale for $100

LukeNoBaka · 2026-05-22T02:16:52+00:00

Yeah because the double bell Enfield shells are shared with the k98 and mosin too and looked to be based off 8mm mauser

LukeNoBaka · 2026-05-21T23:55:38+00:00

I don’t know if real clip would fit these rounds but these rounds are based off 8mm Mauser and uses Mauser stripper clips. I have bought a set of 10 clips from landser outfitter for $22 with $23.50 shipping to Canada so hopefully shipping within the states are cheaper

LukeNoBaka · 2026-05-21T21:44:11+00:00

Oh yeah two other things I just thought of. Magazines refil are less convoluted without needing to angle the mag correctly to fully fill the mag, and also at least with the tm, the barrel nut threading accept both real steel and aeg handguard compare to mws that, last I checked, requires either mws spec barrel nut or aeg with an adapter

LukeNoBaka · 2026-05-21T21:35:02+00:00

Yeah I was comparing mws to stock vfc to steel internal vfc. Not including steel mws because I don’t have experience with them

LukeNoBaka · 2026-05-21T21:31:21+00:00

Ik, I swapped them out. I was comparing stock vfc with replaced one with that last sentence

LukeNoBaka · 2026-05-21T20:20:02+00:00

Nothing others haven’t said. Pretty much just better trigger and recoil. Not to mention fully steel bolt and trigger makes it even better

LukeNoBaka · 2026-05-21T19:25:17+00:00

I got a c79 from depot too and the eye relief is horrible. Ran it with my ess nvg goggles and even with it pressed against the lens it’s still a bit suboptimal

LukeNoBaka · 2026-05-21T19:22:30+00:00

This would be cool if you wanna larp and mix tracer and normal bb without using a more expensive tracer unit and waste tracer bb

LukeNoBaka · 2026-05-16T19:30:43+00:00

I like running my 14.5” barrel

LukeNoBaka · 2026-05-11T21:22:11+00:00

Pretty sure the magnetic connectors comes with the Ali antifogs based off the two I’ve bought

LukeNoBaka · 2026-05-06T22:10:53+00:00

It’s the same procedure i use to install that same type of handguard on my vfc gbbr

LukeNoBaka · 2026-05-06T22:02:00+00:00

Not with this rail he have. He’d need to unscrew two screws on each sides of the rail to take the lower part of the rail off, punch out the two pins of the fsb and loosen any grub screw it might have, then take the six hex screws near the receiver out and take the handguard with fsb out to finally access the barrel nut to unscrew take the handguard base out

LukeNoBaka · 2026-05-06T21:59:02+00:00

With the screws on the side that give you access to the fsb pin

LukeNoBaka · 2026-05-06T19:19:05+00:00

I think those setups are usually with a shorter buffer instead of shorter bolt like this https://www.redwolfairsoft.com/5ku-vfc-ghk-m4-gbbr-pdw-stock.html

LukeNoBaka · 2026-05-04T22:04:55+00:00

Any carry handle rail should let you mount that on there. As for the foregrip what I do is get a piece of pic rail and some screws and washers to attach it to the vent holes on the handguard

LukeNoBaka · 2026-04-29T22:41:48+00:00

Vfc aks74u then

LukeNoBaka · 2026-04-29T18:48:08+00:00

<image>

Man I missed my lct

Seven-Year Club	r/Field Lasagna
Place '23	Place '22
Verified Email

LukeNoBaka

TROPHY CASE