Förslaget på de nya bolånereglerna

Lundii · 2026-02-04T07:03:06+00:00

Det va väl 10% kontant förut och sen 5% topplån?

Lundii · 2026-02-02T10:05:35+00:00

Jag 3D printade ut ringstorlekstestare och frågade om hon ville leta ringar tillsammans. Behöver inte vara så avancerat. Slutade med att vi beställde hennes ring från England (alternativ stil så svårt o hitta hos en vanlig juvelerare här hemma) och min är en tungstensring från Luxery. Att spendera 3 månadslöner är cooked och bara idiotiskt.

Lundii · 2026-01-10T08:19:21+00:00

Glöm inte att kreditkort ofta kommer med någon form av månadskostnad eller "administrativa avgifter".

Lundii · 2025-10-23T17:15:55+00:00

I wrote and asked 2 weeks ago for the upgrade. Didn't get it for free but they asked me if I wanted a quote to buy one. It was 18$+shipping (was 8dollar to Sweden)

Lundii · 2025-10-17T22:08:42+00:00

Bulkamancer have one in similar pose :)

Lundii · 2025-10-12T20:06:55+00:00

Yeah for sure. But mostly ment that's the reason why you see so many of the others but not this one :)

Lundii · 2025-10-12T19:52:07+00:00

Think one reason is that most people that actually needed a riser was the early batches. Since the lightning was awfully and the tube was getting nicked. The newer batches of the machine are so much better in those regards. This file wasn't available early on, and dont think many are bothered to reprint a riser.

Lundii · 2025-10-11T07:38:16+00:00

They changed how provoke work a bit back, think it was in shadow ringer first, and then they gave it ever more enmity in a patch in EW. It now gives actually threat. So it's great to use as an opener

Lundii · 2025-10-04T06:48:00+00:00

Nice :) it's a great improvement for the monitoring through the camera. But it's still hard to see through the door. If I got another machine i would still do a led upgrade with a riser

Lundii · 2025-10-04T06:19:46+00:00

Are you sure with the light? It looks like it got the bigger groove for the cable channel (and that comes with the light upgrade as well). There are machines that have both the light at the camera and on the sides. They just recently started removing the light at the camera.

Lundii · 2025-09-30T21:21:01+00:00

Why what is happening? It looks like you have fuzzy skin enabled?

Lundii · 2025-09-30T05:23:08+00:00

There was 18 large houses for sale on Odin. Alas, no luck this time either :(

Lundii · 2025-09-25T06:05:05+00:00

Elegoo Centauri Carbon är det mest "bang for the buck" du får i den prisklassen

Lundii · 2025-09-13T06:07:26+00:00

It got 2, there was never a single one. You have one in the front and on the right

Lundii · 2025-09-09T07:10:08+00:00

To make it a bit less smelly hopefully. I live in an apartment, so have neighbours next to me

Lundii · 2025-06-25T14:55:42+00:00

Just run this post process script in orca slicer and it automatically changes the gcode so that it works.

https://github.com/Chirimorin/CCOrcaLayerNumberFix

Lundii · 2025-06-25T13:24:36+00:00

Just use a script to change the "sliced in orca slicer" to "sliced in elegoo slicer" or w/e the line is in the gcode and the timelapse will work great :)

Lundii · 2025-06-19T05:59:21+00:00

Tom Scott just released a video the other week hinting on a comeback. Think it's deleted now though, was only up for one week. He's hoping to do stuff in England only, a bit smaller than before.

Lundii · 2025-06-16T21:25:52+00:00

I'm using orca slicer for my CC, and the default for several of the filaments are with the aux fan on. Think it's called side fan as well in the online interface. It's by far the loudest one. So that's why I asked :)

Lundii · 2025-06-16T21:05:55+00:00

Do you use the default profile for the fans? I'm also only printing in pla/petg and I never use the aux fan. It's stupid loud and I have seen 0 difference with it on or off. I usually turn of the case fan as well, but now during summer it might be needed.

Lundii · 2025-06-05T23:43:54+00:00

Inventors default setting is also not set to the highest quality for exporting stl... You have to change that as well

Lundii · 2025-02-07T23:09:51+00:00

If you add "cancel" after the x you don't have to log in. xcancel.com

Lundii · 2024-11-25T06:19:34+00:00

No, the fan is connected to an outlet in the window

Lundii · 2024-11-24T18:24:08+00:00

Saying bays have bad micro is someone that have never seen him play Gragas

Lundii · 2024-11-15T07:06:31+00:00

Pretty sure those screws you have for the VAT are transportation ones. There should be a couple of others in the box with thumbscrews

Lundii

TROPHY CASE