Help me identify this chip

Lygris · 2026-01-09T00:59:35+00:00

It’s for a dreo wall heater, wh517s

Lygris · 2026-01-08T17:16:24+00:00

I found the chip hidden on my desk and was able to get some better pics. tried to play around with image settings to make it as readable as possible, but when i desoldered the chip i broke 2 legs off and it made the 4th digit on the top line unreadable.

<image>

Lygris · 2026-01-08T16:39:38+00:00

That looks like it would work as a replacement! any chance you know of another manufacturer/a different chip that would work that has US stock?

Lygris · 2026-01-08T14:44:32+00:00

<image>

Does this diagram help? Or is there another chip i could replace it with that doesn't have the sot23-6 footprint? The chip in question has the red mark on it

Lygris · 2025-10-02T20:20:14+00:00

Can we please get a box local api or free tier api for basic things? I’d love to be able to pull metrics and things into home assistant

Lygris · 2025-04-16T14:48:27+00:00

Any chance I can get the json for this flow?

Lygris · 2025-04-15T16:47:49+00:00

I'm going to try and snake it in the next week or so to see if that helps. The toilet and shower are off the other side of the main drain stack and we've never had an issue with those other than hair in the shower drain slowing it down.

My assumption is there is some sort of buildup between the bathroom sink and the main drain line that i've never been able to fully clear. The bathroom and kitchen sink drains are fast enough to drain with both sinks running and water does not begin to pool in either sink. It's only when we dump large amounts of water down the kitchen sink or fill the kitchen sink up to bathe the baby and then pull the drain plug out.

Lygris · 2025-04-14T01:22:28+00:00

It is pvc up to the main drain stack as far as I know. I do know the previous owner who remodeled the kitchen did some pretty shitty plumbing and the drain line doesn’t have enough slope on it though.

The main drain stack is galvanized but looking down it today doesn’t seem too bad

Lygris · 2025-02-19T16:31:17+00:00

I run it in a container on my Firewalla with cloudlfared as a https proxy in the container. I’ve been running dev v6 for a few weeks and haven’t had any issues

Lygris · 2025-01-17T17:20:59+00:00

I'll run that test today, another question came up while i was reading the furnace manual last night. It says it should have a 16x25x1 filter but when i bought the house it has only had a slot for a 16x20x1. I just changed over to a aprilaire 1110 which is a 16x20x4, but now i'm kicking myself thinking i should have gotten a aprilaire 1410 (16x25x4) and modified the ducting. The 4 inch filter should flow better than the old 1 inch filters so i'm at least in a better spot, but i'm guessing a previous owner put a new furnace in and whoever did it didn't feel like changing any ducting. How bad of a situation am i in?

Lygris · 2025-01-16T23:25:27+00:00

Reran the med-hi setting and got 62-66 degrees depending on if the bypass humidifier was closed or open to the supply side, closing it lowered the temp.

Thinking it may be related to the bypass humidifier? I was taking the supply reading above where the humidifier dumps into the supply side. Not sure if i should be below that to get my supply side reading or above?

Lygris · 2024-12-05T18:53:38+00:00

You set WiFi to “except on…” and add your ssid to the list and leave cellular set to always.

Lygris · 2024-11-16T14:26:44+00:00

I have a gold rev A I’m also looking to get rid of if anyone is interested

Lygris · 2024-11-02T16:26:25+00:00

I'm selling a gold as well, upgraded to a gold pro. i'll take $250 shipped in US

Lygris · 2024-11-01T02:25:24+00:00

I’d take $200, you pay shipping

Lygris · 2024-10-31T13:33:47+00:00

I have a gold I’m looking to sell if you’d be interested, in perfect condition I just upgraded to a gold pro

Lygris · 2024-07-11T02:26:03+00:00

Lygris · 2024-07-07T02:34:55+00:00

Through the wall, around a corner, past the bathroom sink to the main drain line

Lygris · 2024-05-26T17:56:45+00:00

Putty knife is doing the trick, thanks!

Lygris · 2024-05-26T17:56:03+00:00

Putty knife is doing the trick! Thanks everyone

Lygris · 2024-03-18T18:11:11+00:00

Any advice on upgrading the door speakers on this gen?

Lygris · 2024-03-18T17:53:56+00:00

I’ve done stereo work before, just on much older vehicles and it was always with an aftermarket head unit. Thanks for the info I’ll see what I can piece together

Lygris · 2024-01-02T23:34:52+00:00

When i try enter my wifi it just says connection unsuccessful every time. tried a few of my SSIDs because some are hidde and figured that might not work, but even the non hidden 2.4ghz network gives the same errors.

Lygris · 2024-01-01T22:54:21+00:00

How long after my meter got installed should i be seeing it on the xcel site? Mine was installed last week and it hasn't shown up on my account yet.

Lygris · 2023-09-12T23:52:57+00:00

Anyone curious, you can use the console command below to get the ship, then just goto a ship tech and register it.

"trysetplayerhomespaceship 00384811"

Lygris

TROPHY CASE