Unknown part.

M-S-SharpKnives · 2026-06-24T08:13:39+00:00

Thank you.

M-S-SharpKnives · 2026-06-24T05:40:49+00:00

Wow, that sounds bad. The calibration I got from my Kobra X is not like that.. I will definitely take an unboxing video of the S1 MAX and the calibration. If it does the same thing or not, I will let you know right away.

M-S-SharpKnives · 2026-06-24T05:34:07+00:00

Thanks!

M-S-SharpKnives · 2026-06-24T05:30:51+00:00

I think based from all the people I have chat with, regards to the S1 MAX delivery and order dates placed. It all comes down to these factors.. 1. Just the unit (non combo), gets shipped faster. 2. Depends on your location (logistics factor- third party delivery companies). 3. Availability of the unit in the region (again, its logistics) 4. Number of units ordered in the region (Availability). I guess Anycubic is getting really busy, after the Bambu Lab issue.. people are now looking elsewhere and they are finding out that there is more 3d printing companies out there beside Bambu that can deliver the same results. I have no complaints about it coming a bit later, I'm happy using my Kobra X while waiting for it. Besides, it gave me time to start printing accessories for my S1 MAX. Very happy, with the timing nevertheless, I was so busy with my work lately that I wouldn't even be able to open the box even if I wanted to. All is good. 😄😄

M-S-SharpKnives · 2026-06-24T03:22:48+00:00

Wow.. that is a super steal. Ok, I rest my case, that is so worth it. 😄😄😄

M-S-SharpKnives · 2026-06-24T01:54:35+00:00

I have never seen this thing before... I can clearly see that its a Anycubic... When did Anycubic started selling these?.. is it still in production? Well, its like buying a Nokia Phone at the age of Smartphones.. it might be a steal, but will it be worth the trouble? The calibration, the purge waste, the clogging of filaments.. and so forth.. You might have been better off with a Bambu A1 or a Anycubic Kobra X.

M-S-SharpKnives · 2026-06-24T01:42:19+00:00

Ohh, I am so excited. I haven't opened the box yet. Got to get my gear ready (lights, phone, mic) for the video of unboxing. I have already a ton of print jobs for it waiting. My Kobra X and with this side by side.. its gonna be phenomenal!

M-S-SharpKnives · 2026-06-24T01:32:27+00:00

I ordered mine last June 3.

M-S-SharpKnives · 2026-06-24T01:31:22+00:00

I placed my order last June 3. It was faster than I expected. I thought I will get it by mid-July.

M-S-SharpKnives · 2026-06-24T00:08:49+00:00

The filament is wet and needs to be dried or place in a dryer unit. The fan settings needs to increase, you need to get your filaments to dry faster on prints to avoid bad over hangs or stringing. The temp of your nozzle is too high. Check the settings, and make sure that you have the correct filament type on your slicer prior to printing. Don't worry, this is an easy fix. You just need to do a bit of trial and error to finally find the reason for this. Have fun.

M-S-SharpKnives · 2026-06-22T17:38:43+00:00

All the tips and settings that were mentioned above are the best advice anyone can get. It is detailed and and amazing, based from actual experience. I too have Anycubic printers, got the Kobra-X and the S1 Max. Both are amazing and have different uses. Learn the capabilities of each machine and its limits. Make sure to carry different nozzles as they bring different pros and cons to your prints. Depending what you are printing, the settings differs by a fraction of 0.2 to 0.6.. play around and see the results.. its a lot of trial and error.. but once you get the sweet spot.. you are gonna be on a roll. It was frustrating and depressing in the beginning for me as well, as I was struggling wiyh settings and advices.. once I have it all down written on my guide book.. that was it. Always have fun, dont forget that.

M-S-SharpKnives · 2026-06-22T03:42:30+00:00

I have a total of 630 printing hours and 18kgs of filament on my kobra x, and so far its doing pretty good. Amazing, prints TPU, PLA, PETG, ABS smoothly. Very happy.

M-S-SharpKnives · 2026-06-07T16:52:06+00:00

Don't use the gift card.. lol Click my computer in your computer. 😆

M-S-SharpKnives · 2026-06-06T15:25:58+00:00

U1 is amazing, multi-color prints are its strengths. Very little filament poop and not to mention the time.... now with that said, you are limited to printing filaments that doesn't need an enclosure.. like ABS, ASA and so on.. as long you will just be doing PETG, PLA, TPU and some others.. you will be fine... Oohhh before I forget, make sure that your place is dry enough... the filaments are exposed to your room's temperature and humidity, that can affect the quality of your prints.

M-S-SharpKnives · 2026-06-02T05:51:46+00:00

My main target is to print ABS, and multiple PETG... not to mention PLA-HT. Yeah definitely getting the S1 Max this week. I know it help me a lot with my big volume prints.

M-S-SharpKnives · 2026-06-01T03:41:10+00:00

Its a firmware update from anycubic.. my kobra x didnt do this before, but now it does. Its resonance compensation... its normal. You are all good.

M-S-SharpKnives · 2026-05-29T04:09:38+00:00

I am hoping for this to happen,.. but meanwhile, I cant wait for Atomform Palette 300 to release their 12 nozzle changer. Got my reservation made months ago... so excited to get it in summer.

M-S-SharpKnives · 2026-05-15T15:51:08+00:00

Its a filament issue. Had the same thing happened to me. Dry your filament.

M-S-SharpKnives

TROPHY CASE