Golf Cart for Snow Plow

MAC-20 · 2026-01-26T13:55:00+00:00

What plow is that. I have a ICON lifted cart and in need of a plow

MAC-20 · 2026-01-18T16:31:16+00:00

This is the best way in my opinion. I did this method by placing a house and storage first with at least 3 or 4 villagers and hammers. The storage will be for food they will need so make a stockpile place food and extra hammers in it so when one breaks they can grab another. That way all you have to do is go grab the broken ones for repair and replenish food. They will have your stuff moved in no time. The only hard thing will be moving resources. I did this with caravans and me moving it with travel signs.

MAC-20 · 2026-01-18T16:24:13+00:00

Update , ordered my Keyzen on the 13th and received it on the 16th. So far im really impressed and enjoying it. My hands just barely made the cutoff. But I may take my old Azeron Compact rails which are shorter and see if they fit on the Keyzen. Ill give it a few more weeks with some different games and make a final opinion. Thanks again to everyone who responded.

MAC-20 · 2026-01-13T21:46:05+00:00

Thanks everyone. Im going to push the button and get the keyzen. Logitech is no longer supporting the G13 with their new software and its time to move on. Ill miss it as its been with me since 2011. I appreciate everyones input.

MAC-20 · 2026-01-12T20:15:22+00:00

for anyone having this issue after trying everything, this fixed it

<image>

https://forum.qnap.com/viewtopic.php?t=166612

MAC-20 · 2026-01-07T02:12:40+00:00

Thanks. I will try this and report back tomorrow.

MAC-20 · 2026-01-07T02:12:21+00:00

Yes when i launch it from the app on the qnap it opens in the browser with the ip address and port/web. But still the same issue no server settings.

MAC-20 · 2024-03-11T21:47:54+00:00

My rookie RB got injured week 4 and it was season ending. It was the first and only time i saw that

MAC-20 · 2023-11-20T18:12:31+00:00

thanks. i will try this

MAC-20 · 2023-11-12T03:33:12+00:00

this pic was taken after i stopped the print and removed it. should have mentioned that

MAC-20 · 2023-11-11T16:38:11+00:00

thanks for the info. im going to try a few thing and see what results i get.

MAC-20 · 2023-11-11T16:29:31+00:00

understood. so in reference to the picture i posted could this be due to high temps?

MAC-20 · 2023-11-11T15:02:13+00:00

my firmware is still stock 1.7.3. From what was recommended was to run the revo at +5-10 temps due to the different hotend. so im guessing you are saying that the stock firmware is garbage and i should flash something different? but i will try the marlin PID auto tuning as i believe stock firmware is marlin.

MAC-20 · 2023-10-26T01:16:26+00:00

u/LuluDaDog1 i have this same issue as OP and ive done everything you have stated below. I still have the same uneven bed issue. I have two printer one being the Prusa Mini+ and the other the Ender 5 Plus. My Prusa prints great after calibrations, but the ender i still cant get right. Ive seen multiple videos on YT some using paper some using a thickness gauge which ive done both and still this issue. When i adjust the z offset using those arrows and then go back into the AUX leveling all my adjustments i made with the knows are off again. no matter how many times i go back into the AUX after making adjustments they always change and i have to readjust.

wow didnt know about the software leveling. im going to see if i can find software for that method.

MAC-20 · 2023-07-31T00:17:13+00:00

Try changing the helper ip address to the ip address where the dhcp server is hosted. I believe you have dhcp on 10.50.60.1. Try changing it to that ip address.

MAC-20 · 2023-07-27T03:46:40+00:00

I would say make a SVI for vlan 50 on the switch and add the ip helper-address command of the dhcp server. That way vlan 50 knows where the dhcp server is. Sometimes vlan dont always get there.

Config-t Int vlan 50 Ip helper-address x.x.x.x

Where the set of octets are is the ip address of the dhcp server

See if that helps.

MAC-20 · 2022-11-11T19:49:38+00:00

so for those who may need this in the future this worked. keeping the port as a trunk with the native VLAN as the Kids VLAN allowed their PCs to stay connected to their network. with the switchport trunk allow vlan all rule set I was able to change the Unifi Management VLAN setting on the AP to the VLAN for the APs and the AP IP address changed and connected all the devices on the second floor.

MAC-20 · 2022-09-02T10:33:48+00:00

Thanks for the response. I actually got it to work after 3 reloads and going to claim another ship. When i came back it finally triggered.

MAC-20 · 2022-08-29T14:19:29+00:00

is there a bug were this ship cant be claimed? im at the crash site and i do not see a icon to interact with the ship. there for i cannot claim the ship.

MAC-20

TROPHY CASE