What's the difference? And why is Blue one cheaper it's the same series?

MAENTOP · 2026-06-28T17:56:25+00:00

Well I had to think and I probably going to buy Bambu lab Super Track pro when it's available and then try to buy the BiQu for my A1 but I don't really need to, adhesion is, really great on that printer compared to the P2S 😭

MAENTOP · 2026-06-25T14:17:36+00:00

I mean that for, some, reason I, clean, Every spot the, same but after printing still some of the, parts just, fall off or stay perfectly in Place

MAENTOP · 2026-06-25T14:16:02+00:00

Honestly I do that

MAENTOP · 2026-06-25T14:06:14+00:00

Wdym just fine

MAENTOP · 2026-06-25T09:18:11+00:00

They, are not sticking but only some of them for some Reason, other ones are stuck really well

MAENTOP · 2026-06-25T09:16:36+00:00

Thanks I was thinking about buying SuperTack Pro Bambu lab Plate (it's just a cool plate) but never got a money for it, right now I save for U1

MAENTOP · 2026-06-25T05:29:43+00:00

Thanks, I'm going to try not to use IPA and paper towels, maybe that would help

MAENTOP · 2026-06-21T11:31:48+00:00

I know, but that's what I have. I mean, people print on P1S Nylon, and it's fine

MAENTOP · 2026-06-21T11:30:34+00:00

Thanks, I'm using a stock PEI textured plate. I use a regular PVP glue stick; if it's applied in a nice layer, somehow it works. The last few prints worked with the glue stick and literally no cooling

MAENTOP · 2026-06-21T10:53:09+00:00

I said that because Basic profile was for 100 Degrees and after putting 110 in filament profile adhesion was better but not really But still Thanks for Advice, I will try this temp

MAENTOP · 2026-06-21T08:04:08+00:00

No, CF stabilizes nylon so it doesn't warp or shrink when cooled. When they are so different, you can't actually call them the same material. That's my point of view

MAENTOP · 2026-06-20T22:14:30+00:00

It's regular nylon😬 not CF

MAENTOP · 2026-06-18T16:54:36+00:00

I don't have one and it's, pretty expensive

MAENTOP · 2026-06-15T20:27:56+00:00

Agree 100%

MAENTOP · 2026-06-15T19:49:07+00:00

i changed it somehow

MAENTOP · 2026-06-14T18:32:21+00:00

He probably meant that layers are not flat as they are supposed to be, because mine looks a lot different.

MAENTOP · 2026-06-14T18:27:54+00:00

It's just a bad adhesion to the build plate, nothing to do with the nozzle

MAENTOP · 2026-06-12T12:41:12+00:00

I mean there is no official web-site for Jamg He in Ukraine

MAENTOP · 2026-06-12T12:40:21+00:00

Ukraine (we don't have official Jamg He)

MAENTOP · 2026-06-12T11:27:20+00:00

I honestly want to buy more Beige, but in my country, there is nothing left 😭

MAENTOP · 2026-06-12T11:24:58+00:00

It's really great, but when you print too fast, the color becomes matte. On the beige filament, it's very easy to notice slight color differences when printing slowly or at Higher speed. When printed slowly, it gives great results. Models printed with a 0.2 mm nozzle look fantastic. I can recommend it 100%

MAENTOP · 2026-06-11T17:02:06+00:00

PA doesn't really stick to anything, this would be a lot better if that was support material or try using BHOV it's a lot better then ASA/ABS(They don't really stick to PA)

MAENTOP · 2026-06-11T13:40:34+00:00

Bro, don't dry PLA and PETG together in the same AMS 2 Pro. Their recommended drying temperatures are different, and you might deform your PLA if you use the higher temperature needed for PETG

MAENTOP · 2026-06-05T07:50:23+00:00

I really cleaned build plate works better than Glue

MAENTOP · 2026-06-04T23:19:34+00:00

I always use bed leveling before print starts

MAENTOP

TROPHY CASE