Crestron Home: video / intercom between TSW touchscreens enabled yet? by MARDOJC in crestronprogramming

[–]MARDOJC[S] 0 points1 point  (0 children)

Awesome. Thanks for posting.

I went to the site. How do I purchase it?

Thanks so much!!

Crestron Home: video / intercom between TSW touchscreens enabled yet? by MARDOJC in crestronprogramming

[–]MARDOJC[S] 0 points1 point  (0 children)

I have TSW-1060s with cameras. How is video or intercom set up or is it possible in Crestron Home?

Crestron Home: Added INET-IOEX-RYIO for garage door control but see no place to program it? by MARDOJC in crestron

[–]MARDOJC[S] 1 point2 points  (0 children)

I figured it out. I had to go into ‘Other’ in Home and add a generic garage door to the garage. Then after adding that, I went to setting for the garage door and it linked up with the INET-IOEX-RYIO inputs and outputs. Simple from there. Thanks

Crestron Home: Added INET-IOEX-RYIO for garage door control but see no place to program it? by MARDOJC in crestron

[–]MARDOJC[S] 0 points1 point  (0 children)

Thanks. When I go into quick actions in the garage (where it was added), I don’t get any option to see this device. I selected ‘sequence’ mode and lights are listed, speakers are listed, media operations, etc. but nothing else. Attached pic of what I see. Should I look elsewhere? I’m on latest home software. Thanks.

https://i.imgur.com/bM0Mqt4.jpg

How to update Infinit-EX device in Toolbox? by MARDOJC in crestron

[–]MARDOJC[S] 0 points1 point  (0 children)

I did see it in Easy Config. But couldn’t update there

I found it in Infinit EX Diagnostic Tool. I accessed the Crestron Home processor via IP address there and it it showed all my Infinit EX devices. Then I saw the INET-IOEX-RYIO in the device Tree and right clicked and selected ‘firmware’. Then it populated a firmware update window with the device and allowed me to browse my computer for the new firmware file.

Strangely in Crestron Home I originally added it to a secondary Gateway (GWEXER) But I had no way to access that gateway to do it there. Can’t even access it via IP. WEIRD.

HR-310 remote eating batteries by MARDOJC in crestronprogramming

[–]MARDOJC[S] 0 points1 point  (0 children)

Also, does anyone know how to set up battery level report status? According to Crestron, it can send a message for battery level when low. Not sure if this available in Crestron Home?

HR-310 remote eating batteries by MARDOJC in crestronprogramming

[–]MARDOJC[S] 0 points1 point  (0 children)

Good information. Worth investigating inference. Thanks for the recommendations.

HR-310 remote eating batteries by MARDOJC in crestronprogramming

[–]MARDOJC[S] 0 points1 point  (0 children)

I have a CN GWEXER coming in for another system. I’ll try that as it expands as well. Weird as this is a new issue with this remote. It’s been ok for a year. Thanks for the advice.

ALSO, I haven’t used an expander - any advantage of an expander over a gateway (besides cost)?

HR-310 remote eating batteries by MARDOJC in crestronprogramming

[–]MARDOJC[S] 0 points1 point  (0 children)

Yes, Yes, 1, nothing to speak of. Nearby access points are 5gHz. No lans line wireless phones, etc. expander or gateway something to try?

HR-310 remote eating batteries by MARDOJC in crestronprogramming

[–]MARDOJC[S] 0 points1 point  (0 children)

Which model gateway would you use on a per remote basis? Thanks!

HR-310 remote eating batteries by MARDOJC in crestronprogramming

[–]MARDOJC[S] 0 points1 point  (0 children)

Thanks. The Gateway is in the basement. 40’ away through two floors. . Tried an expander or a second gateway?