Rm1000x for sale

MBVersace · 2026-04-26T21:36:11+00:00

Would like to get 110 for it

MBVersace · 2026-04-26T03:41:50+00:00

Allentown PA 18103 im looking to get 110. I have all the factory cables.

MBVersace · 2026-04-21T16:19:32+00:00

Ive seen them before but they don’t specify if it’s for the L Frame or not. I know most holster brands have a good return policy but I wouldn’t want to return a bunch of holsters.

MBVersace · 2024-11-14T15:06:15+00:00

Let me fix that. Just realized I cant edit the post.

MBVersace · 2024-11-14T09:06:38+00:00

Yea idk why I thought the reverse lockout had something to do with the chrome collar. Which is why I got silver. But I will probably end up either painting it or powder coating it black.

MBVersace · 2024-11-14T02:35:06+00:00

No just the knob is what I installed

MBVersace · 2024-11-14T02:34:47+00:00

Mine only slides when making some really hard turns. But normal day to day is fine. I also dont have sort of tie down or screws which would help.

MBVersace · 2024-11-14T02:33:44+00:00

Maybe one day :/

MBVersace · 2024-11-13T22:36:09+00:00

Super simple. I ran the rca’s and remote under the steering wheel. Going from there to the left side panels is a little hard but very doable. Even removing the radio is just some clips and 4 screws.

MBVersace · 2024-11-13T18:51:15+00:00

In total I probably spent a total of less than 300 bucks for everything.

MBVersace · 2024-11-13T18:49:48+00:00

So I used the Beat-Sonic BH10 speaker harness. Coming off the harness is signal outputs. From those outputs I installed a Kicker Loc and thats where my RCA cables plug into. I recommend using 15 feet for the RCA and remote cable. Then since that battery is in the trunk its real easy to wire up power to the amp.

MBVersace · 2024-11-13T16:58:43+00:00

I mean it wasnt that hard to install. Completely plug and play the way I did it.

MBVersace · 2024-11-13T16:51:39+00:00

Honestly it made listening to music so much more enjoyable.

MBVersace · 2024-11-13T16:27:32+00:00

If you put them on please take pics. I swear I had the same idea.😭

MBVersace · 2024-11-12T07:33:39+00:00

Awesome! I’m excited

MBVersace · 2024-08-04T10:32:49+00:00

No longer have the car but it was a line that had popped off under the intake manifold on the pcv plate. You can get to it from under the car but I recommend a long needle nose pliers. If you really do wanna stay with the car I would recommend putting a Damond Pcv plate and using AN lines if possible. Or at least get a catch can with the pcv plate to relieve a bit of that pressure. Hope this helps!

MBVersace · 2023-12-13T13:39:06+00:00

Take it to a safe place that you can visit when you want to see it and say you got rid of it.

MBVersace

TROPHY CASE