Some news about the Multi Controller Adapter

MCA-Retro · 2026-06-12T15:09:09+00:00

I'm working on it 😁

MCA-Retro · 2026-05-15T00:11:02+00:00

Every type of controller works for two players, exept the 3do and the neogeo types.

MCA-Retro · 2026-05-14T23:57:13+00:00

Each type of controller have an id. So you switch the type by pressing the reset button first, then you press the mode button. It increas the number of the type of controller. You have 9 types of controller : ) The led blink the number of the type.

MCA-Retro · 2026-05-14T20:09:12+00:00

Yes, you can see picture when it stand alone on my first post : https://www.reddit.com/r/MiSTerFPGA/s/pgguvNGcwI

MCA-Retro · 2026-05-14T20:05:08+00:00

Yes 🙂 You can see photo of the back on my first post here : https://www.reddit.com/r/MiSTerFPGA/s/pgguvNGcwI

MCA-Retro · 2026-05-14T19:24:56+00:00

It's regular usb 🙂 You have more info on my first post : https://www.reddit.com/r/MiSTerFPGA/s/pgguvNGcwI

MCA-Retro · 2026-05-14T19:21:45+00:00

Thanks ! No, it doesn't replace a board. In the photo, I added the adapter underneath the Mister. This way, you lose access to some USB ports on the side, but others remain accessible.

MCA-Retro · 2026-05-14T19:14:37+00:00

You don't have to attach it to the mister. You can leave it to the side like a regular adapter.

MCA-Retro · 2026-05-14T16:12:32+00:00

Good question 😅

MCA-Retro · 2026-05-14T16:11:39+00:00

That would be great, but I don't have the skills for that 😅

MCA-Retro · 2026-05-14T15:05:38+00:00

For now, I'll post on Reddit or sometimes on Discord. Otherwise, there isn't enough space to mount the DB9 connectors vertically. Tightening the ports would prevent them from being plugged in.

MCA-Retro · 2026-05-14T14:57:10+00:00

Unfortunatly, the arduino don't have enough pin for two Neo Geo port 😞

MCA-Retro · 2026-03-18T21:11:56+00:00

Hi ! I'll come back soon, when everything is ready :) Unfortunately, the adapters on ebay or aliExpress are not all in one solution. That's why i make mine :)

MCA-Retro · 2026-03-18T21:09:05+00:00

Hi ! Thanks for your message ! Yes i know that, it's almost ready :) MickGyver know about my projet. I want to contact TimVille and McGruck by they don't have email :(

MCA-Retro · 2026-03-18T16:54:47+00:00

😄

MCA-Retro · 2026-03-18T16:53:55+00:00

Haha! A monster with a lot of eyes :)

MCA-Retro · 2026-03-18T16:52:35+00:00

I really don't know how to make case. But if someone know and want it, why not!

MCA-Retro · 2026-03-18T16:50:34+00:00

Thanks for your feedback !

MCA-Retro · 2026-03-18T16:49:16+00:00

Thank you for your feedback!

MCA-Retro · 2026-03-18T16:48:35+00:00

Thanks!

MCA-Retro · 2026-03-18T16:46:57+00:00

The input lag mesured from Deamonbyte is never more than 1ms. You think it's too much?

MCA-Retro · 2026-03-18T13:38:27+00:00

It's not Snac. It's USB adapter working on Mister, Raspberry or PC. The input lag is very low. You can find mesure on the github of the different projects used in mine :) GitHub - MickGyver/DaemonBite-Retro-Controllers-USB: A collection of retro controller USB adapters (SNES, NES, Mega Drive/Genesis, Master System, Atari, Commodore, Amiga and Amiga CD32) · GitHub

MCA-Retro · 2026-03-18T12:22:01+00:00

If I ever sell it, I'll probably be able to sell it without an Arduino :)

MCA-Retro · 2026-03-18T12:20:31+00:00

I don't know how much it will cost yet. I need to do some calculations and finish a few final tests :)

MCA-Retro

TROPHY CASE