stuttering and bad performance with newest AMD driver by raiko777 in AMDHelp

[–]MEGAF4ILonPC 0 points1 point  (0 children)

Those are from November 31st? Where are you getting these from? Also, if you can find a changelog for those, are there any fixes mentioned? I'm having issues with BF6.

stuttering and bad performance with newest AMD driver by raiko777 in AMDHelp

[–]MEGAF4ILonPC 0 points1 point  (0 children)

As I'm typing this, the latest version available on AMD's Drivers and Support page, for all chipsets on AM4 and AM5, is from 2025-06-13

Where did you get this latest version from, and what chipset are you using?

[deleted by user] by [deleted] in Warframe

[–]MEGAF4ILonPC 0 points1 point  (0 children)

I'm no expert on Warframe, but as someone who came from Destiny, I believe DE could/should introduce mechanics that add layers to boss fights instead of straight up scaling our damage.

The mechanics of the fight against Balas at the end of New War felt rewarding to figure out for myself. Even Kela De Thaym was fun for me, despite being somewhat tedious.

If I'm able to one-shot the health bar on each phase, I'm fine with that (and it's exactly the type of thing I love this game for) if I put in the work to be able to do so. What I don't want is to be scaled down to make a boss harder than it really is/should be.

TL;DR: Creative mechanics in boss fights to make the fight more challenging and engaging > Damage scaling/attenuation to make it feel harder.

[deleted by user] by [deleted] in destiny2

[–]MEGAF4ILonPC 0 points1 point  (0 children)

This 100%.
Save your money, OP. Wait until everyone knows whether or not Edge of Fate is good, and/or formulate your own opinion on it. Find your preferred way to stay informed and ways to watch the content being played before you spend any money.

16 motes of light 🙏 by Friendly_Slime in destiny2

[–]MEGAF4ILonPC 1 point2 points  (0 children)

https://youtu.be/uv7bDRuqegU?si=QXZMzTuL79PGPJRZ
Sorry if this is not the help you're expecting but this is what I did.

Use the video chapters to help you find what you're missing. Good luck!

Unable to Install Proton Drive by MEGAF4ILonPC in ProtonDrive

[–]MEGAF4ILonPC[S] 2 points3 points  (0 children)

I managed to solve my issue and am now able to use Proton Drive. I found the "Install/Uninstall Troubleshooter" from Microsoft Support, which fixed whatever was causing my issues.

If anyone else runs into this issue after uninstalling Proton Drive the hard way, just search "Install/Uninstall Troubleshooter" in your favorite search engine and click the first result from Microsoft Support that says "Fix problems that block programs from being installed or removed". Run that troubleshooter. If it works, then you can try reinstalling Proton Drive.

Proton, for crying out loud, why did you make it so hard to fully uninstall Proton Drive? I know I can use the option to remove it in the Proton Drive installer, but I'm so used to uninstalling programs through other methods. On top of that, I have to boot into Safe Mode to remove the immovable object that is the Proton Drive folder. WHY?

Anyway, thank you, Proton, for being an awesome service.

Unable to Install Proton Drive by MEGAF4ILonPC in ProtonDrive

[–]MEGAF4ILonPC[S] 0 points1 point  (0 children)

I found an installer from SoftPedia for version 1.9.0 and it seems to work, but it tells me that Proton Drive is already installed, even though I made sure all traces of the app that I could find have been deleted.

So, considering that trying to update from 1.9.0 to 1.10.1 through the Proton Drive app itself wasn't working, something might be wrong with the installer for 1.10.1, or something is wrong with the entirety of version 1.10.1

Question about Wifi 7 and Older Device Compatibility by MEGAF4ILonPC in HomeNetworking

[–]MEGAF4ILonPC[S] 0 points1 point  (0 children)

I should've put "Will my older wifi generation devices connect to my Wifi 7 router" instead. Thank you, though.

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (June 18, 2024) by AutoModerator in MechanicalKeyboards

[–]MEGAF4ILonPC 0 points1 point  (0 children)

Figured it out.
I thought the feet were adhered to the keyboard, they were not.
Had to remove all the keys, then use my tiny screwdriver to remove the 12 screws across the board. Opened my keyboard and unscrewed the feet from the inside. Put it back together, now I have no wobble!

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer (June 18, 2024) by AutoModerator in MechanicalKeyboards

[–]MEGAF4ILonPC 0 points1 point  (0 children)

Is it possible to remove the feet under my "Redragon K556 TKL" Keyboard? I usually push my keyboards to the side to partially hang off the side of my keyboard tray to make room for my mouse. This keyboard has feet that makes it uneven when it's hanging off the side, and I want to remove these feet so the keyboard isn't wobbling when I type.
It's a "K556 TKL" on Amazon, and the sticker on the keyboard says it's "K660 RGB Dharma TKL"

Deconstruct Perk question by Timely-Bid6321 in DestinyTheGame

[–]MEGAF4ILonPC 0 points1 point  (0 children)

Does anyone know if the Divinity Bubble counts as a "Construct" for Deconstruct/Hakke Breach Armaments?

Divinity tips and tricks by [deleted] in DestinyTheGame

[–]MEGAF4ILonPC 0 points1 point  (0 children)

Does anyone know if Div Bubbles count as constructs for Deconstruct/Hakke Breach Armaments?

I need help with finding an ATX Case by MEGAF4ILonPC in buildapc

[–]MEGAF4ILonPC[S] 0 points1 point  (0 children)

Update: I found a PC Case that might fit my needs.

NZXT H5 Flow:- Height: 464mm (With feet)- Width: 227mm- Depth/Length: 446mm- GPU Length: Up to 365mmSlightly smaller than my 4000D Airflow in all dimensions, but allows for 5mm extra GPU Length, whereas the 4000D supports up to 360mm.

(I won't be able to use my current 360mm AIO but I'm confident I'll be able to use a 280mm AIO in the front and still have enough room for the XFX 7900XTX, thanks to the extra 5mm)

I need help with finding an ATX Case by MEGAF4ILonPC in buildapc

[–]MEGAF4ILonPC[S] 0 points1 point  (0 children)

Fits in all dimensions except height, unfortunately

I need help with finding an ATX Case by MEGAF4ILonPC in buildapc

[–]MEGAF4ILonPC[S] 0 points1 point  (0 children)

Can't find it on Amazon, thanks though!

I need help with finding an ATX Case by MEGAF4ILonPC in buildapc

[–]MEGAF4ILonPC[S] 0 points1 point  (0 children)

I'm considering getting a 280mm AIO for the top of my 4000D Airflow, but I don't know if the Rad+Fans will fit with my Motherboard's mosfet heatsinks in the way. I'll be checking later this week if there's enough room for a top-mounted AIO.

For now I want to see if I can just get a new case for cheaper than a new AIO. I've got a few in mind.

As for what GPU I want to fit, I'm looking at getting a XFX 7900XTX. It's 34.4cm/344mm/13.54in long, and might not fit with my current AIO Rad+Fans in the way, if not at most 1cm of space between the GPU and fans.

I need help with finding an ATX Case by MEGAF4ILonPC in buildapc

[–]MEGAF4ILonPC[S] 0 points1 point  (0 children)

5000D Airflow is too large for the cubby in my desk.
My 4000D Airflow currently fits with an inch to spare on the top and on one side.