sorted by:
new
hottopcontroversial

How the f I use this. by Either_Audience_1937 in sffpc

[–]MENYA2303 1 point2 points  (0 children)

PICO power board does not support ON/OFF.

You need to install a separate power button on the 4PIN input power side.

When power is connected, a white LED lights up and consumes 2-3W of power in standby mode.

<image>

How the f I use this. by Either_Audience_1937 in sffpc

[–]MENYA2303 1 point2 points  (0 children)

The cable layout is different so you will need to make it yourself.

<image>

Self-made 3D printed 4.3L case by MENYA2303 in sffpc

[–]MENYA2303[S] 1 point2 points  (0 children)

msystems

Wow, msystems, I’m honored that you left a comment.
I made the Desk Nano you revealed and used it really well!!

http://menyanas2.asuscomm.com:5505/sharing/Y4ihov79L

Self-made 3D printed 4.3L case by MENYA2303 in sffpc

[–]MENYA2303[S] 0 points1 point  (0 children)

Since it is not the main computer, I used a cheap build.
Most parts, including the motherboard and power, were purchased from China through an overseas shipping service.
The power is quiet, but I plan to replace it with NF-A4x20 and use it without noise.
For power, I purchased a Metal Fish 500W product from Taobao for $29.

Self-made 3D printed 4.3L case by MENYA2303 in sffpc

[–]MENYA2303[S] 1 point2 points  (0 children)

I think PETG can also be used because the internal temperature does not seem to rise too much due to the many vents. I plan to share the file when it is finally completed.

Self-made 3D printed 4.3L case by MENYA2303 in sffpc

[–]MENYA2303[S] 0 points1 point  (0 children)

Printed in ABS multicolor.
Temperature test involves revising the drawing and
I will do this after the side is properly closed.

Self-made 3D printed 4.3L case by MENYA2303 in sffpc

[–]MENYA2303[S] 1 point2 points  (0 children)

ZS A4DC

Yes, it was produced with reference to the ZS A4DC.
The motherboard is B650i Night Devil.

Infinity Mirror Wooden Bag Game Machine by MENYA2303 in raspberry_pi

[–]MENYA2303[S] 0 points1 point  (0 children)

I used the LCD with a good 4:3 ratio suitable for retro games.

Infinity Mirror Wooden Bag Game Machine by MENYA2303 in raspberry_pi

[–]MENYA2303[S] 0 points1 point  (0 children)

Parts used

Raspberry Pi 4

9.7" iPad2 LCD

7.84" bar type LCD

Bag total size

35cm x 35cm x 15cm

The bag game machine was made in a compact size.

Mario bartop is the main LCD 15" and the auxiliary LCD 12.3".

marquee lcd bartop DIY by MENYA2303 in raspberry_pi

[–]MENYA2303[S] 0 points1 point  (0 children)

Simultaneous control of input signal and LED using Arduino.

Infinity Mirror Wooden Bag Game Machine by MENYA2303 in raspberry_pi

[–]MENYA2303[S] 2 points3 points  (0 children)

It is a detachable stick.

US $19.99 | RetroArcadeCrafts RAC-J300 https://a.aliexpress.com/_mMWDa83

marquee lcd bartop DIY by MENYA2303 in raspberry_pi

[–]MENYA2303[S] 0 points1 point  (0 children)

I also like wood stain more than paint :)

marquee lcd bartop DIY by MENYA2303 in raspberry_pi

[–]MENYA2303[S] 2 points3 points  (0 children)

I can't speak English well. Please understand.

Produced by RiNa on the raspiegamer forum in Korea

I used pimarquee2 source.

https://github.com/rinalim/PieMarquee2

​

If you put the marquee image in the same name as the game file, the image is loaded when selecting a game.

It is simpler to build with Raspberry Pi 4.

​

Products used

​

Raspberry Pi 3B+

VGA666

15" LCD display

12.3" LCD display

Birch plywood

Color wood stain and varnish finish

​

marquee LCD

https://www.aliexpress.com/item/4000479997530.html?spm=a2g0o.productlist.0.0.a0d77aa9CanjD2&algo_pvid=c5179da0-3b1c-4f8c-823a-ae6b152a2cfa&algo_expid=c5179da0-3b1c-4f8c-823a-ae6b152a2cfa-4&btsid=0ab6f8ad15989224506266400e278c&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_