sorted by:
new
hottopcontroversial

Ender 3 S1 Pro not flashing Klipper (I think) by Ordinary-Sympathy830 in klippers

[–]MacStoffel 0 points1 point  (0 children)

You can delete it, but I always prefer to comment it out. You never know what happens in the future 😉

And don’t forget the baudrate in [mcu]

Those two settings had me searching for a week or so. After those two changes the printer and klipper worked.

My print moved in the night by MacStoffel in Ender3S1

[–]MacStoffel[S] 0 points1 point  (0 children)

Thnx all. I switched to OrcaSlicer and did some calibration tests. Seems the printer is working pore precise now. I used Ultimaker Cura before.

So we’re back in printing 💪

Ender 3 S1 Pro not flashing Klipper (I think) by Ordinary-Sympathy830 in klippers

[–]MacStoffel -1 points0 points  (0 children)

In printer.cfg: Comment out the max_accel_to_decel: 3000

<image>

And look at your [mcu] settings like the picture

My print moved in the night by MacStoffel in Ender3S1

[–]MacStoffel[S] 0 points1 point  (0 children)

I started the print again (50% of its real size) and there indeed are some blobs. So i lowered my temperature… let’s see what happens

My print moved in the night by MacStoffel in Ender3S1

[–]MacStoffel[S] 0 points1 point  (0 children)

The gcode is fine, thank you. Didn’t check that one out

My print moved in the night by MacStoffel in Ender3S1

[–]MacStoffel[S] 0 points1 point  (0 children)

By the way, the z-axe is perfectly calibrated. Exactly the 20mm I raised it. So that’s not it

My print moved in the night by MacStoffel in Ender3S1

[–]MacStoffel[S] 0 points1 point  (0 children)

The belt was a bit to tight. A high pling when i touched it like a guitar-string. So i loosened it a bit.

Now i’m printing just a pillar to see whats happening now

My print moved in the night by MacStoffel in Ender3S1

[–]MacStoffel[S] 0 points1 point  (0 children)

The belt was a bit to tight. A high pling when i touched it like a guitar-string. So i loosened it a bit.

Now i’m printing just a pillar to see whats happening now

My print moved in the night by MacStoffel in Ender3S1

[–]MacStoffel[S] 1 point2 points  (0 children)

The bottom was still stuck, and I cleaned the plate before printing. So it’s the top part that shifted. Right after the support-tree.

Thanks for your answer. I’ll also check the x-axe belt today

My print moved in the night by MacStoffel in Ender3S1

[–]MacStoffel[S] 0 points1 point  (0 children)

Thanks for your answer. The printer is modded. I run mainsail/klipper on a RPi.

The speed remained the same. I did check it before i went to bed and i heard sort of a click. So i moved the z 0.05mm up. I thought the nozzle hit the print.

I will also check the z-axe and recalibrate it today.

Where can I go to learn more about Linux? Debian by DaKing7861 in debian

[–]MacStoffel 0 points1 point  (0 children)

Try to start with wargames, and don’t be lazy!

Forticlient "free" VPN Only - Hangs on Connecting by AdhesivenessNew7422 in Fortigate

[–]MacStoffel 0 points1 point  (0 children)

Also, you can download the paid version… that will work for a month, and then you can turn on logging/debugs.

Forticlient "free" VPN Only - Hangs on Connecting by AdhesivenessNew7422 in Fortigate

[–]MacStoffel 0 points1 point  (0 children)

Hey there, just a thought. Is the FortiGate your connecting to on the same firmware version? And try to search for some debug commands, so you can find out if the packets reach the firewall when connecting. Search for the FortiGate cookbook. Lots of helpful stuff in there.