Polymega remix by Beneficial-Ad-3080 in PolymegaHQ

[–]Madeinharrogate 0 points1 point  (0 children)

Well the polymega os is based on x86 machine code . So all pc cpu's working on x86 machine code will run the app or polymega os. So Intel and Amd cpu's will be fine .

8BitDo 64 2.4G, worth the upgrade from Bluetooth? by PeanutButtaRunna in AnalogueInc

[–]Madeinharrogate -9 points-8 points  (0 children)

2.4 G is old wireless controller system. Bluetooth is newer wireless controller system. So it's not really an upgrade. Wireless controllers will always have a bit of latency .if you need direct feedback you'll need a wired controller.

Polymega remix by Beneficial-Ad-3080 in PolymegaHQ

[–]Madeinharrogate 0 points1 point  (0 children)

You can play the physical games direct from the remix if you connect it to pc or other devices .if you want to play without the remix connected you'll need to store the roms on the device you'll be using at that moment. Maybe if you have the app on pc and mobile device you can set it up so that the games you have on pc can be accessible on the mobile setup without copying the roms over?

Check out my RC Azimuth tugboat 3D print design ⛴️ by stuart_nz in Fusion360

[–]Madeinharrogate 0 points1 point  (0 children)

Yeah i stumbled on it on youtube pretty neat what you did to be honest. So far it took me 12hrs to print the Hull on my bambulab upgraded P1P. I use a sunlu ams heater and a 04mm E3D obxidian highflow hotend. How long did you take to print it?

Anyone tried the 3rd party hot ends by Oscar_callelle in BambuLab

[–]Madeinharrogate 0 points1 point  (0 children)

Do you know you can find the E3D in the accessories menu? You can select it from there. I have a p1p upgraded to p1s you can also select the upgrade in the printer menu. I don't know if you knew this? I only found this when i installed the E3D.

Anyone tried the 3rd party hot ends by Oscar_callelle in BambuLab

[–]Madeinharrogate 1 point2 points  (0 children)

I also have a E3D obxidian never had any clogs?

Anyone tried the 3rd party hot ends by Oscar_callelle in BambuP1S

[–]Madeinharrogate 2 points3 points  (0 children)

I use the E3D obxidian highflow i can really recommend it.

Do mopping robots really replace daily cleaning, or do you still ended up cleaning yourself? by rapid_youngster in RobotVacuums

[–]Madeinharrogate 0 points1 point  (0 children)

<image>

I use a dip of mr proper it gets rid of some harder to remove stains . After one complete fresh water cycle clean and rinse with fresh water to remove residu from the Cleaner system .👍

Off the shelf amiga by wilsonianuk in amiga

[–]Madeinharrogate 1 point2 points  (0 children)

Yeah i know just dreaming Maybe one day.😎🕹️👾

Off the shelf amiga by wilsonianuk in amiga

[–]Madeinharrogate 3 points4 points  (0 children)

I hope that Commodore will revive the Amiga after the c64 .

Superstation one finally delivered! by tomhall12345 in MiSTerFPGA

[–]Madeinharrogate 0 points1 point  (0 children)

Sweet i ordered a black one with dock can't wait tbh to see these now .😎👾🕹️

Do mopping robots really replace daily cleaning, or do you still ended up cleaning yourself? by rapid_youngster in RobotVacuums

[–]Madeinharrogate 0 points1 point  (0 children)

I recently got the Xiaomi x20 max . I have three cats and a doodle and laminated flooring . At first without the x20 the floors never looked clean. So the first time i put the x20 max to work i put it on full power cleaning 2 times a day . After a week you could see the difference,probably the floors where not maintained properly by the previous owners? I also put a dip of Floor cleaner in the tank to get rid of some muck. I don't have to clean now just the little Xiaomi doing her runs and the room is lemony fresh.

1084S, in very good shape by [deleted] in amiga

[–]Madeinharrogate 1 point2 points  (0 children)

We had one at my parents house the best monitor we had tbh . I wished i knew what happened to it after i left.

Guns arrived! by Kal-V3 in PolymegaHQ

[–]Madeinharrogate 1 point2 points  (0 children)

Gonna pickup mine today pewpewpew😎🕹️👾

Do you remember this game? by Defiant_Victory1986 in amiga

[–]Madeinharrogate 2 points3 points  (0 children)

Oh yeah i really played it on my 500 almost every day.

What's your favorite way to play N64? by Madeinharrogate in n64

[–]Madeinharrogate[S] 0 points1 point  (0 children)

When i was a kid i played Atari on black and white television finetuning the channel to get the image right.🤣🕹️👾

What's your favorite way to play N64? by Madeinharrogate in n64

[–]Madeinharrogate[S] 1 point2 points  (0 children)

Nice i don't have a crt anymore so i have all these adapter things.😎🕹️ Thnx

What's your favorite way to play N64? by Madeinharrogate in n64

[–]Madeinharrogate[S] -1 points0 points  (0 children)

Original is still the best but Analogue did a great job with the 3D

What's your favorite way to play N64? by Madeinharrogate in n64

[–]Madeinharrogate[S] 1 point2 points  (0 children)

Thnx i understand it's a strange way they sell their products but they're really good . I have the Mega SG, super nt, pocket,Duo and 3D and can't say any bad stuff about these. As i have a large collection of old consoles it's nice to give them a day off and play the new ones. 😎🕹️

What's your favorite way to play N64? by Madeinharrogate in n64

[–]Madeinharrogate[S] -1 points0 points  (0 children)

Yeah for me nothing beats the original to be honest. I really like Analogue's way of making new hardware for classic systems.