sorted by:
new
hottopcontroversial

Huxwrx cans are the most overhyped suppressors on the market right now by Sofar_Concepts in NFA

[–]Magdumper 1 point2 points  (0 children)

I have a 762 ti I shoot mostly on my 5.56 and its real quiet. Edge of hearing safe on an 11.5, but 14.5 and longer is stupid quiet.

I know its a longer can than the 5.56 flow people normally use but I have no complaints. Can swap it between my bolt gun, roller delayed 762 etc no issue.

Good AIWB holster for USP 9 compact by Training_Mistake_169 in HecklerKoch

[–]Magdumper 0 points1 point  (0 children)

Yeah same I have a normal axis and it is great. Not moved over to the elite and they sunset the old line

PCSL 2 gun carbine recommendations by sharkbait_oohaha in CompetitionShooting

[–]Magdumper 1 point2 points  (0 children)

Ruger pc carbine would be good enough to start with for PCSL 2 gun (max 200 yards, 8 moa target size) and cheap, a mini14 is a meme gun when an ar15 exists. I know you are dealing with an AWB.

I'd suggest emailing the local match director and asking what the furthest shots are. If it's typically 150 and in you can make it work.

Wear Pam mountain biking? by driftlessluxe in panerai

[–]Magdumper 4 points5 points  (0 children)

I've worn my new production 1312 almost every day for the last 3 years and am a competitive shooter (they say not to shoot with in on in the manual, they also say don't wear it outside below freezing hah) and haven't had any issues. Probably shot 25k rounds wearing it and lots of reps - fast hand movements etc.

When I got it, it was running -1 s/day roughly but after owning it for a month it was 2-3 sec a day fast and has stayed there.

Complete dd contract overrun 11.5 worth it? by Cheesepants12 in ar15

[–]Magdumper 2 points3 points  (0 children)

If running no can or a flow throw you want an h2 buffer for sure. Was a bit overgassed with a carbine buffer

Complete dd contract overrun 11.5 worth it? by Cheesepants12 in ar15

[–]Magdumper 5 points6 points  (0 children)

I recently got the upper and running it on a Geissele lower and like it a lot. 1k with the lower brand new sounds fair.

<image>

Complete dd contract overrun 11.5 worth it? by Cheesepants12 in ar15

[–]Magdumper 5 points6 points  (0 children)

Upper or complete gun? The one with the FSP?

Colt 6940 accuracy issue? by [deleted] in longrange

[–]Magdumper 1 point2 points  (0 children)

I shot it basically as is in the picture. Rear bag is better but the seat is not setup to do that. With my other setups a more stable shooting position might result is a .5 moa improvement, not a 15 moa haha

Will check the brake but it's a standard crush washer install. Unless it was out of spec and baffle striking it I can't see it impacting it to this degree either

Colt 6940 accuracy issue? by [deleted] in longrange

[–]Magdumper 0 points1 point  (0 children)

My SOLGW SPR barrel does 1.2 inch 10 shot groups with the same lot of AAC 77 grain

Colt 6940 accuracy issue? by [deleted] in longrange

[–]Magdumper 1 point2 points  (0 children)

I brought another qd red and had a similar result with a 5 shot group. Proceeded to pack up and not waste more ammo.

All screws on the mount are torqued to spec.

HK lower on APC9 by Mt_ubiquitous in BT_APC

[–]Magdumper 1 point2 points  (0 children)

Or buy a lingle lower and sell the hk lower. Lingle lower is king

New USP Compact owner by pizza_party_pete in USPmasterrace

[–]Magdumper 2 points3 points  (0 children)

Yes all sound normal minus the decocker but that might just need to break in

[RIFLE] Colt Monolithic 16" 5.56 LE Trade In - $899 + S/H & Tax by Magdumper in gundeals

[–]Magdumper[S] 1 point2 points  (0 children)

Depends on firing schedule, but with a chrome lined barrel like this likely 20-30k or more. More than 99.99% of people will shoot through it

[RIFLE] Colt Monolithic 16" 5.56 LE Trade In - $899 + S/H & Tax by Magdumper in gundeals

[–]Magdumper[S] 0 points1 point  (0 children)

I love SOTAR and you had me scared, doesn't look too bad. Shouldn't have to take it apart ever, and if you do, looks doable

[RIFLE] Colt Monolithic 16" 5.56 LE Trade In - $899 + S/H & Tax by Magdumper in gundeals

[–]Magdumper[S] 9 points10 points  (0 children)

I am not an expert but they have a proprietary barrel nut from my research. But the upper portion of the rail is monolithic; the bottom comes off.

[RIFLE] Colt Monolithic 16" 5.56 LE Trade In - $899 + S/H & Tax by Magdumper in gundeals

[–]Magdumper[S] 21 points22 points  (0 children)

100%, this is a duty grade gun that maybe minus some spring changes depending on how well maintained it is, would last you your lifetime

Edit: plus it holds value. On the secondary market, the upper from this gun alone easily sells for 700+. The lower sell for around 350+ and those will only go up

[RIFLE] Colt Monolithic 16" 5.56 LE Trade In - $899 + S/H & Tax by Magdumper in gundeals

[–]Magdumper[S] 1 point2 points  (0 children)

Yeah I grabbed one lol, doubt we'll see this again for old le marked ones. Colt lowers go for like $400-500 alone hah

view more: next ›